Now that the cab is slaughtered out, its time to test some things.
Brry71 was interested in the PCB, and i wanted to make sure the "red" issue is not caused by the board, because i dont like selling rubbish.
So i digged up the
testpanel that i made in the past.
the old wireharness is still intact, so i only need to connect the wires to the test controlpanel and we are good to go
![Wink ;)](https://www.dragonslairfans.com/smfor/Smileys/default/wink.gif)
![](http://www.opdenkelder.com/pics/zaccraiders/checktime/1.jpg)
I also had a spare cp cable with plug so i solderd that in place.
in this way i dont need to cut off the connector and can keep the cable unmodified.
![](http://www.opdenkelder.com/pics/zaccraiders/checktime/2.jpg)
At my mothers, i "borrowed" some power from my CK
![Grin ;D](https://www.dragonslairfans.com/smfor/Smileys/default/grin.gif)
![](http://www.opdenkelder.com/pics/zaccraiders/checktime/3.jpg)
The red was not there on my CK monitor, so the board looks fine.
After looking at the monitor i found a loose wire..
![](http://www.opdenkelder.com/pics/zaccraiders/checktime/4.jpg)
Hmm no wonder that the use of the degauss button did not make any difference, this is the cable to the coil
![Roll Eyes ::)](https://www.dragonslairfans.com/smfor/Smileys/default/rolleyes.gif)
![](http://www.opdenkelder.com/pics/zaccraiders/checktime/5.jpg)
After i degaussed the monitor manual with my degaussing coil, the colors came back
![](http://www.opdenkelder.com/pics/zaccraiders/checktime/6.jpg)
![](http://www.opdenkelder.com/pics/zaccraiders/checktime/7.jpg)
![](http://www.opdenkelder.com/pics/zaccraiders/checktime/8.jpg)
![](http://www.opdenkelder.com/pics/zaccraiders/checktime/9.jpg)
![](http://www.opdenkelder.com/pics/zaccraiders/checktime/10.jpg)
A video of my "helper" testing the board can be found here.
![](http://i2.ytimg.com/vi/A_ipLAA0u5g/default.jpg)
click the pic..
As for the degaussing, i did a little video too:
![](http://i1.ytimg.com/vi/tsBlmlT2Hes/default.jpg)
click the pic..
It looks like both the board and the monitor are fine, exept for the loose connector wich came out of the board.
but thats a easy fix.
do you want to solder that yourself bela?, or do you want me to take care of that ?
Time for mission number 2;
I dont want that the bezel that needs to be shipped to hungary breaks, so i have decided to go with the
"dartnuno ultra protection packaging method" ![Grin ;D](https://www.dragonslairfans.com/smfor/Smileys/default/grin.gif)
all dressed up like a waiter, i am ready for some woodworking
![Wink ;)](https://www.dragonslairfans.com/smfor/Smileys/default/wink.gif)
![](http://www.opdenkelder.com/pics/zaccraiders/packing/1.jpg)
Little helper, can you bring the delicate bezel here please ?
![](http://www.opdenkelder.com/pics/zaccraiders/packing/2.jpg)
Thank you Xander, i'll take it from here
![Cheesy :D](https://www.dragonslairfans.com/smfor/Smileys/default/cheesy.gif)
![](http://www.opdenkelder.com/pics/zaccraiders/packing/3.jpg)
Some spare pieces of wood i had lying around
![](http://www.opdenkelder.com/pics/zaccraiders/packing/4.jpg)
One part cut, one more to go.
![](http://www.opdenkelder.com/pics/zaccraiders/packing/5.jpg)
Some screws will hold it together
![](http://www.opdenkelder.com/pics/zaccraiders/packing/6.jpg)
After making the two borders, im checking if it fits and that i did not make any measure mistakes..
![](http://www.opdenkelder.com/pics/zaccraiders/packing/7.jpg)
4 borders ready, and it fits good.
![](http://www.opdenkelder.com/pics/zaccraiders/packing/8.jpg)
used some bubble wrap, to give it maximum protection.
![](http://www.opdenkelder.com/pics/zaccraiders/packing/9.jpg)
An old handle makes a nice suitcase of this sandwich
![Grin ;D](https://www.dragonslairfans.com/smfor/Smileys/default/grin.gif)
![](http://www.opdenkelder.com/pics/zaccraiders/packing/10.jpg)
To test the durability i dropped the suitcase from 1 meter to the ground....
![Twisted :twisted:](https://www.dragonslairfans.com/smfor/Smileys/default/icon_twisted.gif)
Noooo just kidding ofcourse !
![Grin ;D](https://www.dragonslairfans.com/smfor/Smileys/default/grin.gif)
![](http://www.opdenkelder.com/pics/zaccraiders/packing/11.jpg)
Ready for transport, although i thought something was missing, so i put on a label
![Cheesy :D](https://www.dragonslairfans.com/smfor/Smileys/default/cheesy.gif)
![](http://www.opdenkelder.com/pics/zaccraiders/packing/12.jpg)
Everything ready for now, lets see what the delivery options are.
already speaking with chris and thwocker..