Screen(tv scard) problem need some input

[polderarcade]

At the moment trying to hook up a hang on to a tv scard
But the image only has red green and blue no white and other collers
I know some of you guys did the same any idée where to look at my tech experience is not that high but its improving slowly


Connected like this

Red board to red scard
Blue bard to blue scard
Green board to green scard
Sync board to sync scard
Al return togetter to ground

[italiandoh]

It is SCART, not scard.
Post the SCART pins you've used and we'll verify if you did it right.

Matteo

[polderarcade]

Sorry scart, its weekend

And I’m typing with spelling control of word

Working whit this one at the moment

http://www.geocities.ws/podernixie/htpc/cables-en.html#jammascart

jamma to scart
Little different from the first setup
but the same results, on screen the images in red/blue/yellow?

[DarthNuno]

Just send 5V to the pin 16 of the scart connector. It'll switch your TV into the RGB mode and it will solve your problem 

[polderarcade]

Nuno thanks I believe I tried it before,
Bud after connecting pin 16 to 5 volts screen  image is oke
First time I dit it wrong I think

So after two years of storage hang on the luxe is riding again 

[Etienne MacGyver]

Cool !