« previous next »
Pages: 1 ... 27 28 [29] 30 31 ... 37

Author Topic: Q*bert. A man and his grail... FINISHED !!!  (Read 271912 times)

Etienne MacGyver

  • ArcadeLifeStyler'
  • ***
  • Posts: 7611
  • The Netherlands
    • View Profile
Re: Q*bert. A man and his grail...
« Reply #420 on: April 22, 2015, 10:13:24 AM »
Quote from: Level42 on March 18, 2015, 11:40:53 PM
Used the wife's hair dryer to fold over the edges.... but I felt like a little more heat would have been better......but it worked....

I have some doubt if it was wise to go with black paint on the panel.....seems to shine through a bit on the yellow parts.......but there's no way back now and its not a big thing....

Thats a bummer !

perhaps your feeling was right and you needed more heat ?

or maybe the heating up caused the internal structure of the material to change to more brittle ?

its a thick kind of material right ?

it sucks man, i feel your pain..  :'(
Logged

Tyrem

  • ArcadeLifeStyler'
  • ***
  • Posts: 1762
    • View Profile
    • SK GameNatiX
Re: Q*bert. A man and his grail...
« Reply #421 on: April 22, 2015, 01:24:43 PM »
my Crystal Castles repro also cracked. Was pretty pissed about it, too. It is not as bad as yours though. You just see and feel the crack.
I will take a closer look at Centipede, Joust and Gyruss. They all have new cpos.
Logged
Looking for Dragons Lair 1 or 2, Space Ace, Double Dragon, Robotron and yeah... a Shinobi would be cool, too!

level42

  • ArcadeLifeStyler'
  • ***
  • Posts: 13555
  • Ridderkerk, arcade capital of Europe !
    • View Profile
    • Arcade 42
Re: Q*bert. A man and his grail...
« Reply #422 on: April 22, 2015, 10:13:43 PM »
Man....the thing is I put SO much effort in that damn CP.....

Don't think the heating during bending was a problem....

But I do remember that I had the cab out in the sun for an hour or 4 last weekend.....I did remove the Marquee (bezel wasn't in there) but didn't give the CP a second of thought.....even so....just 4 hours....and it's barely spring here...

Worst thing is thinking that I might have to remove this SOB again.......grrrrrrr....

Let's focus on positive stuff:

This is my idea for setting up the monitor and supports:
Logged

level42

  • ArcadeLifeStyler'
  • ***
  • Posts: 13555
  • Ridderkerk, arcade capital of Europe !
    • View Profile
    • Arcade 42
Re: Q*bert. A man and his grail...
« Reply #423 on: April 22, 2015, 10:16:33 PM »
Now I _really_ would love to know how far up the CRT should be from the "floor"......if any Q*bert owner could measure that I'd be extremely thankful.....this size is extremely important as I plan on drilling holes in the supports and I only have one shot to get it right....
Logged

level42

  • ArcadeLifeStyler'
  • ***
  • Posts: 13555
  • Ridderkerk, arcade capital of Europe !
    • View Profile
    • Arcade 42
Re: Q*bert. A man and his grail...
« Reply #424 on: April 22, 2015, 10:31:01 PM »
Looking at the set up I fear this is not going to fit in the cab.....the metal supports and even the PCB area/plate are going to hit the PCB/backdoor I'm afraid.....
This means hacking the shit out of the monitor.....the PCB is going to have to under the CRT, not too much of a problem, can mount it on the board in the cab.

[Edit] Had a second look. I think I can remove the entire original frame and only keep the two parts that are directly mounted to the CRT. The new supports can be mounted to these, all the other metal is not necessary.

Not doing that now though....I need the distance as mentioned above first  ;D
« Last Edit: April 22, 2015, 10:43:50 PM by Level42 »
Logged

Luigi

  • ArcadeLifeStyler'
  • ***
  • Posts: 1686
    • View Profile
Re: Q*bert. A man and his grail...
« Reply #425 on: April 23, 2015, 08:32:00 AM »
André, I will try to take care of this today. Not sure if I will make it cause I will pick up some bw-TVs for me and Jochen ;)

If there's time left I will measure the distance of the tube from the supporting board :)
Logged

level42

  • ArcadeLifeStyler'
  • ***
  • Posts: 13555
  • Ridderkerk, arcade capital of Europe !
    • View Profile
    • Arcade 42
Re: Q*bert. A man and his grail...
« Reply #426 on: April 23, 2015, 03:39:33 PM »
 :spaceace: :spaceace: :spaceace:
Logged

Laszo

  • ArcadeLifeStyler'
  • ***
  • Posts: 993
  • Building
    • View Profile
Re: Q*bert. A man and his grail...
« Reply #427 on: April 23, 2015, 06:58:49 PM »
Quote from: Level42 on April 21, 2015, 08:22:18 PM
Well....it cracked !


Looks like I'm not the only one: http://forums.arcade-museum.com/showthread.php?t=222589

Damm after so much work.... What material are these made of anyway plastic or paper? I never replaced a cpo so far. The only one I have is still the galaxian cpo which is at your place!!! And I will not pick it up until I can play Qbert  :twisted:  :twisted:

Good luck with the monitor setup, keep posting I really enjoy these resto threads.
Logged

Luigi

  • ArcadeLifeStyler'
  • ***
  • Posts: 1686
    • View Profile
Re: Q*bert. A man and his grail...
« Reply #428 on: April 23, 2015, 08:17:35 PM »
André, I have just been looking behind the glass on Dirk's Q*bert. The monitor sits all the way down on the wood. The tube itself is ~10mm from the wood while the mounting latches in the corners rest on the wood.....not a mm space between metal and wood.

I will upload a picture I have made so you see I wasn't drunk while looking ;)
Logged

Laszo

  • ArcadeLifeStyler'
  • ***
  • Posts: 993
  • Building
    • View Profile
Re: Q*bert. A man and his grail...
« Reply #429 on: April 24, 2015, 12:46:27 AM »
Love the CRT, nice and clean. Can't wait to see Q working.
Logged

level42

  • ArcadeLifeStyler'
  • ***
  • Posts: 13555
  • Ridderkerk, arcade capital of Europe !
    • View Profile
    • Arcade 42
Re: Q*bert. A man and his grail...
« Reply #430 on: April 24, 2015, 09:36:35 AM »
Quote from: Luigi on April 23, 2015, 08:17:35 PM
André, I have just been looking behind the glass on Dirk's Q*bert. The monitor sits all the way down on the wood. The tube itself is ~10mm from the wood while the mounting latches in the corners rest on the wood.....not a mm space between metal and wood.

I will upload a picture I have made so you see I wasn't drunk while looking ;)

Thanks !! So is that 10mm. From the lowest part of the CRT ?
I indeed already assumed the frame was flat to the wood....
Logged

Luigi

  • ArcadeLifeStyler'
  • ***
  • Posts: 1686
    • View Profile
Re: Q*bert. A man and his grail...
« Reply #431 on: April 24, 2015, 10:20:17 AM »
Here's the pic:

http://361610.test-my-website.de/_temp/20150423_193325.jpg

The 10mm are measured from the middle of the edge to the wood.
Logged

level42

  • ArcadeLifeStyler'
  • ***
  • Posts: 13555
  • Ridderkerk, arcade capital of Europe !
    • View Profile
    • Arcade 42
Re: Q*bert. A man and his grail...
« Reply #432 on: April 24, 2015, 05:05:01 PM »
Did I ever tell you I love you Thorsten ? Well I do  ;D ;D ;D ;D ;D ;D ;D ;D


Thanks my friend  :spaceace: :spaceace: :spaceace: :spaceace: :spaceace: :spaceace: :spaceace: :spaceace:
Logged

anunaki

  • ArcadeLifeStyler'
  • ***
  • Posts: 1432
    • View Profile
Re: Q*bert. A man and his grail...
« Reply #433 on: April 24, 2015, 05:21:30 PM »
Does this mean you'll have the Qbert up and running this weekend Andre?
Logged

level42

  • ArcadeLifeStyler'
  • ***
  • Posts: 13555
  • Ridderkerk, arcade capital of Europe !
    • View Profile
    • Arcade 42
Re: Q*bert. A man and his grail...
« Reply #434 on: April 24, 2015, 06:30:27 PM »
Well I have a very busy weekend up ahead so I'm really not too sure.
I also am playing with the idea of asking someone to weld the metal supports instead of drilling holes and bolting......seems that might be more stable and saves from having to drill the holes.....
Logged
Pages: 1 ... 27 28 [29] 30 31 ... 37
« previous next »