Hi,

Anybody has three sets of Teflon Leg Levelers that they don't use?
Please let me know.

Hi guys, time to sell most of my arcade cabinets!
Need space for my printing business.

I don't plan to sell my favorite cabinets (Robotron, Defender) right away, starting with the ones I don't think I'll regret selling.
But feel free to make an offer for one (or all).
Most of the cabinets are projects, some working, some need more work, which I often already started on.

Additional photo's an request, no problem of course.
I already have a lot on my Flickr page. Be sure to check that out if you are interested. Also make sure to look in the Albums section.
https://www.flickr.com/photos/35165513@N04/page1

-----

Championship Sprint
Not working.
Started restoration on it.
Monitor and marquee comes on, no game image at the moment (little sound).
Could see the game running when I got the cabinet, maybe have to try the other video pcb that comes with the cabinet.
Extra video pcb (so you have two).
Pedals restored, needs more parts I have but didn't install yet.
New marquee and side art.
Comes with new T-molding.
€650

Photoplay cabinet
Works great. Good picture on the monitor. New touchscreen installed two years ago.
Could need a repaint and new T-molding.
€50

Burgertime SOLD PENDING PAYMENT
Not working.
Outside of cabinet done. New art (bezel, marquee, control panel side art and kickplate).
Monitor needs chassis. Original Midway Burgertime board. Cabinet harness is converted to Jamma or at least something in between, needs work.
€850

MS. Pac-Man SOLD PENDING PAYMENT
Not working now. Was working after hauling it to a local expo, the monitor doesn't come on.
Can hear the game playing. Hoping it's a loose connector or fuse.
Comes with new art for sides and kickplate.
€750

Donkey Kong Junior SOLD
Working great. Sharp clean original monitor. Both side arts in good shape (not perfect).
Plywood cabinet.
€1300

Centipede SOLD
Not working. Outside finished, new control panel and side art (Arcadeshop.com), needs monitor work.
Monitor chassis included.
Replaced bottom of the cabinet with new wood. Can't see it from the outside.
Cabinet still empty inside, I have all parts but they need to be installed.
€650

Asteroids SOLD
Working, needs some coin door parts, I have most. Comes with extra new vector tube.
Needs some coin door parts, I have most but need to be installed.
New T-molding.
Makes a humming noise, so would probably need the big blue capacitor replaced (included).
Also included an new A/R-01 rebuild kit. Highscore save kit installed.
€750

Sega Nascar sitdown with Outrun 2SP SOLD
Working great. With Chihiro Type 3 and Outrun 2 SP on Solid state drive. Good monitor without burn. Motor parts refurbished and NOS up- down shifter. Comes with coin tower, not seen on the pictures.
€850

Paperboy SOLD
Not working. Didn't start on this project yet. Screen and marquee comes on, no game or sound.
New control panel overlay, new NOS(!) handlebars, new side art.
Comes with new T-molding.
€1250


-----


Also for sale some parts:

Pengo High Score Save kit. SOLD
http://www.jrok.com/hardware/pengo_epack/pengo_epack.html
€30

Donkey Kong Online High Score Save kit. SOLD
€40

Donkey Kong High Score Save Kit (Braze 2001, DK 1.1) SOLD
http://www.brasington.org/arcade/products/hs/dk/
€30

Jamma Board Adapter to Pac-man or Ms. Pac-man Harness Multipac SOLD
Play any Jamma board (like a 60-in-1) in your (Ms.) Pac-Man cabinet
https://hotrodarcade.com/products/fully-restored-jukebox
€30

Atari Audio Regulator A/R II-02 to -06 Rebuild Kit SOLD
http://www.arcadeshop.com/i/101/audio-regulator-ii-02-to-06-rebuild-kit.htm
€10

Photo's of those parts here:
https://www.flickr.com/photos/35165513@N04/albums/72157682298063892

-----

Here are some photos taken for this topic, I will describe the state of the cabinets as best and honest as I can.
Will answer PM's and accept offers.

By the way, if your cabinet needs art, let me know.
I can print most in-house.


Untitled by barrybuise, on Flickr

Untitled by barrybuise, on Flickr

Untitled by barrybuise, on Flickr

Untitled by barrybuise, on Flickr

Untitled by barrybuise, on Flickr

Untitled by barrybuise, on Flickr

Untitled by barrybuise, on Flickr

Guys, I am having a problem with my Robotron
Fired it up and now I get slow vertical blocky lines during boot and a short sound effect.
After that, nothing. Just black.
It actually started a couple days before with "Ram error 31" and sometimes other random numbers.

Had something like this before, back then I just reseated all the connectors and the error went away.
But this looks a little more serious.

Haven't really tried to find the cause, if it's not a connector thing I hope it the ram.
I still have the older 4146 ram chips. Time to upgrade to 4116's.
Does anyway here have a load of them? No time to order from the US considering I want to bring this to Eurocade next saterday!

As a backup, I can always bring my DK Jr.



EDIT. Found this http://www.mikesarcade.com/cgi-bin/spies.cgi?action=url&type=info&page=Williams-hardware.txt online.
Will try tonight!

EDIT2. My screen kinda looks like a "rug pattern" screen...
The text below is what I found on the link above.

By far the most common failure of these machines is the DRAM (type 1
failure).  This usually will produce a very organized "rug pattern" on
the screen and the game will not "boot".  Sometimes you get really weird
video or else none at all.  The solution is simple, get new DRAMs!
These are type 4116 (450 ns access) 16K x 1 Dynamic RAMs
 

Hi guys,

Mike from www.mikesarcade.com started a Kickstarter project to fund the manufacture of replacement Orange and Blue pushbuttons for Donkey Kong and Mario Bros upright arcade machines.
https://www.kickstarter.com/projects/1423841610/donkey-kong-orange-and-blue-pushbuttons?fb_action_ids=10205634935610650&fb_action_types=og.shares

I know you all want some nice shiny perfect Nintendo buttons for your cabinets!
Now is the time. I backed the project for new buttons for my DK, DK Jr and Mario Bros.

Hi guys!

Last weekend I finally started working on my Mario Bros widebody from Thomas' first container
The problem, the Sanyo EZ20 monitor doesn't come on. When I power the cab on, marquee light works, coin door lights work, I hear the psu humming like it should.
But the monitor doesn't power on, not even the slightest hum or buzz. No glow from the neck, no sparks or arcing around the flyback.

No sound from the Mario Bros board too. But since the monitor isn't doing anything, the sound board on the monitor probably does not get power to work.

I tried the another Sanyo monitor from my DK cabinet, game does work! Though I can't hear any sound, could be a fault on the Mario Bros board or the audio board on the DK monitor.
But at least, the psu, cabinet wiring and game board seems to be pretty OK.
so the problem must be in the Mario monitor.

As you can see on the photo, the flyback had some goo leaked. Could that be the problem? Both fuses on the chassis checked out fine btw.
I know they sell replacement flybacks for the Sanyo EZ20, but before ordering from the US I would like to hear your expert opinion

Thank you for reading!

-Barry


EDIT: I just noticed I already unplugged the video cable going to the "invert/ non-invert board" prior to taking the photo's.
I did test it when the input was hooked up correctly guys

Anyone interested in my Over / Under coin door?
I have no use for it anymore.
It has to go, altough the cat doesn't like the thing gone.

It's for free. Pickup prefered, else you pay postage.

The pics are BEFORE professional power coating (so not done by me).
Now it looks a lot better. Bucket, coin mechs and wiring are currently not assembled (but are included).
Can take a new pic tonight if needed.
Pickup possible in Goes, the Netherlands.







Thanks!
Barry

For my scratch build DK cabinet I am in desperate search of a Nintendo coin door. None on Ebay at the moment, and when there is one they won't ship to the Netherlands most of the time.

Thanks for looking!
Barry