Author Topic: new project barn find sramble  (Read 4775 times)

retrocab

  • Member
  • **
  • Posts: 106
    • View Profile
new project barn find sramble
« on: February 27, 2014, 07:53:45 PM »
hi everybody great find today zaccaria scramble
stood in an old barn for twenty years untouched!!!!!

cleaned it pcb with ic sockets to, sadly nog go scrambled picture monitor works though
not sure yet what to do repair pcb ,Multi pcb,dedicated mame??

nice machine though looks great need new t molding and cp
keeping this one
[/URL][/img]

« Last Edit: February 27, 2014, 08:02:29 PM by retrocab »

Etienne MacGyver

  • ArcadeLifeStyler'
  • ***
  • Posts: 7611
  • The Netherlands
    • View Profile
Re: new project barn find sramble
« Reply #1 on: February 27, 2014, 07:59:22 PM »
hi everybody great find today zaccaria scramble
stood in an old barn for twenty years untouched!!!!!

cleaned it pcb with ic sockets to, sadly nog go scrambled picture monitor works though
not sure yet what to do repair pcb ,Multi pcb,dedicated mame??

nice machine though looks great need new t molding and cp
keeping this one






There i fixed it for you, and please rotate those pictures..

retrocab

  • Member
  • **
  • Posts: 106
    • View Profile
Re: new project barn find sramble
« Reply #2 on: February 27, 2014, 08:03:54 PM »
thnx
will do next time

anyone know where to get a pcb???
gr

PaulSwan

  • ArcadeLifeStyler'
  • ***
  • Posts: 786
  • ZZZ
    • View Profile
    • The Zaccaria WWW Site
Re: new project barn find sramble
« Reply #3 on: February 27, 2014, 08:11:46 PM »
You can use a standard Konami or Stern Scramble PCB. They're quite common to get a hold of on both sides of the pond.
Paul.
ZZZ

Belike

  • ArcadeLifeStyler'
  • ***
  • Posts: 4769
  • Budapest, Hungary
    • View Profile
Re: new project barn find sramble
« Reply #4 on: February 28, 2014, 07:41:57 AM »
Dont dare to mame it!!!
Scramble pcbs are quite common and not too expensive, maybe you should also try to replace the Z80, it usually solves the problem.

retrocab

  • Member
  • **
  • Posts: 106
    • View Profile
Re: new project barn find sramble
« Reply #5 on: February 28, 2014, 07:53:09 AM »
hi thanks for the tips, that z80 is that an easy swap or does it need additional work

greetz robert  ps and were is it located on the board


Etienne MacGyver

  • ArcadeLifeStyler'
  • ***
  • Posts: 7611
  • The Netherlands
    • View Profile
Re: new project barn find sramble
« Reply #6 on: February 28, 2014, 07:58:04 AM »
Looks like you also need a new CP plexi  ::)

retrocab

  • Member
  • **
  • Posts: 106
    • View Profile
Re: new project barn find sramble
« Reply #7 on: February 28, 2014, 08:49:11 AM »
yes that to ,but first machine working,

checking my options for the pcb

need working one,or mayby friend in Germany can fix it
gr robert

Belike

  • ArcadeLifeStyler'
  • ***
  • Posts: 4769
  • Budapest, Hungary
    • View Profile
Re: new project barn find sramble
« Reply #8 on: February 28, 2014, 11:25:59 AM »
hi thanks for the tips, that z80 is that an easy swap or does it need additional work

greetz robert  ps and were is it located on the board


Those are the long ones close to the ribbon cable connector.If they are not socketed, it will need some skills.
If you have a picture from the monitor when the cab turned on, maybe we can help.
It could also be a power supply problem, if the +5 V is too low, the pcb won't start.

retrocab

  • Member
  • **
  • Posts: 106
    • View Profile
Re: new project barn find sramble
« Reply #9 on: March 04, 2014, 04:45:10 PM »
goood news found a working pcb

it runs now

just need a new cp

printed one myself for now but want an Original
gr robert