Help please...GYRUSS coin door wire matching.

[WunderCade]

I am wondering if someone with a Gyruss with the Centuri coin door can help me out matching up the coin door connector wires.

The first coin door (on right) that came on the cab is the atari-style COINCO door (similar to Centipede) with all the white striped wiring. It came with the cabinet. but was hacked up. So I decided to buy the more popular CENTURI coin door with the logo plaque.

The door on the left I am trying to install now but wire colors on the male connector don't match the cab connector wires on the female receiver:



The actual connectors match, just not the amount of wires or the colors of the wires.

Heres the female coin door connector from the cab (basically four wires: red +5v,violet -5v,black grd, & lt. blue ?) Problem: no (orange) 12v for the coin counter and the schematic says it's a 12v coin counter?:



Here's the Centuri Coin Door male connector (same connector) with way more wires (basically: wht,orange,brn,grn x2,blue,red,gray,yellow,blk):



Can someone take a pic or make a color pinout of their connector setup, cuz I'm lost?

Any guidance would be appreciated.

Thanks.
Donnie

[WunderCade]

I know Bruno can help me out, I think you have the same coin door and setup Bruno. 

[polaris]

he's on holidays

[WunderCade]

I wonder how his vacation went? His v.3 additional was approved! Woot!!

[DarthNuno]

I forgot this post  I'll check that on my Gyruss cab and let you know 

[WunderCade]

Thanks Bruno. 

[DarthNuno]

Here's the link to download the full size pictures/views of the connector : CLICK ME.
I hope the color code will help you:  Because I'm not using the original board/power supply on this cabinet, I cannot check what's on the other side of the connector...
Good luck on this.

[WunderCade]

That's a huge help to me. Thanks again Bruno.