1
Artwork / Re: Wanted: Zaccaria Crazy Kong restored bezel artwork or complete repro
« on: June 25, 2022, 10:07:15 PM »
Very nice work! Awesome 
News:
ALS'/DLF' : your daily dose of Arcade Life Style...inside the Dragon's Lair!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Artwork / Re: Wanted: Zaccaria Crazy Kong restored bezel artwork or complete repro
« on: June 16, 2022, 09:51:20 AM »
That looks good! Is the image sharp and would you care to share it?
I have this:
3
Artwork / Re: Wanted: Zaccaria Crazy Kong restored bezel artwork or complete repro
« on: June 16, 2022, 09:48:37 AM »
that could work, hope it comes out sharp. Fixing the broken sections in Photoshop should be doable.
I can try and scan mine, it's broken into 3 parts at the bottom, currently taped up (would remove the front tape to scan).
Paul.
4
Artwork / Re: Wanted: Zaccaria Crazy Kong restored bezel artwork or complete repro
« on: June 14, 2022, 09:58:06 AM »
Thanks for referring me Etienne!
Sadly I don't have a file for it, except your scan. And no offence, but due to the scanner (probably a HP 4600 series?) the quality is not that sharp and great to just retouch it in Photoshop, it would need to be redrawn I think.
I would prefer a new sharp scan to work from to save us some time and be more accurate if possible.
Sadly I don't have a file for it, except your scan. And no offence, but due to the scanner (probably a HP 4600 series?) the quality is not that sharp and great to just retouch it in Photoshop, it would need to be redrawn I think.
I would prefer a new sharp scan to work from to save us some time and be more accurate if possible.
5
Arcade Lifestyle / Re: [Roadtrip] Time for another Zaccaria
« on: February 05, 2022, 01:50:27 AM »
Hey Etienne, nice to see you are "back in the hobby"! 
Great catch you have there! And a nice game corner too!
I have the Zaccaria sticker for the coin door by the way, in case you need one or two.
Great catch you have there! And a nice game corner too!
I have the Zaccaria sticker for the coin door by the way, in case you need one or two.
6
'Business' Area : Buy/Sell/Trade / Re: Monaco GP - PCBs and Bezel
« on: February 18, 2018, 08:23:54 PM »
Hi,
Good luck with you Monaco GP restoration!
If you can't find a bezel, I can make a repro for you if you are interested.
Good luck with you Monaco GP restoration!
If you can't find a bezel, I can make a repro for you if you are interested.
7
'Business' Area : Buy/Sell/Trade / Re: Zaccaria shell
« on: February 06, 2018, 05:43:41 PM »
Great offer! Tempted myself.
For anyone else, I can offer reproduction Crazy Kong side art (vectorized by Etienne and Ckong) and a control panel overlay
For anyone else, I can offer reproduction Crazy Kong side art (vectorized by Etienne and Ckong) and a control panel overlay
8
Artwork / Re: Crazy Kong Sideart WIP
« on: October 05, 2017, 02:28:42 PM »
Costs for 1 set of gloss laminated side art (2 sides) is €90.
Size is approx. 75cm x 165cm
Size is approx. 75cm x 165cm
9
Artwork / Re: Crazy Kong Sideart WIP
« on: October 01, 2017, 01:48:33 PM »it's printed on glossy vinyl with a gloss laminate, if I'm correct. Barry? And the vinyl is very strong and cratch resistant.
Yes printed on glossy vinyl with gloss laminate. Trying to match the Universal and Zaccaria cabinet lacquered finish
You did a real good job vectorizing the artwork btw!
10
'Business' Area : Buy/Sell/Trade / Re: Wanted: Zacc crazy kong parts
« on: September 08, 2017, 11:27:17 PM »And the side art is in the make. Well, actually it's done. Print tests are next, to check colors, glossiness of the coating, etc. This of course with the help of Joeks.
Sorry to keep you waiting ckong, will pick it up early next week.
Busy with house renovation arrangements, printer maintenance.. Just busy basically
11
'Business' Area : Buy/Sell/Trade / Re: FOUND: 3 sets of Teflon Leg Levelers
« on: July 13, 2017, 03:38:29 PM »
Warning! Wrong size 
I guess I didn't pay attention to the details of the leg levelers. They probably have the correct size as well, but these are slighty too thin (small).
I guess I didn't pay attention to the details of the leg levelers. They probably have the correct size as well, but these are slighty too thin (small).
12
'Business' Area : Buy/Sell/Trade / Re: FOUND: 3 sets of Teflon Leg Levelers
« on: July 13, 2017, 10:55:00 AM »
Thanks Muddy, you beat me to it
13
Arcade Lifestyle / Re: Road Trip Report for a Donkey Kong Cab
« on: July 12, 2017, 02:18:52 PM »
I "met" him on Marktplaats while selling my Funhouse pinball machine. Through messaging he asked me about my other cabinets that I have for sale.
Got a little tired of it, he was so time consuming so pointed him to this forum and told about the containers from COW
Think he can be trusted, he's seems just a little over enthusiastic
Got a little tired of it, he was so time consuming
so pointed him to this forum and told about the containers from COW Think he can be trusted, he's seems just a little over enthusiastic
14
'Business' Area : Buy/Sell/Trade / Re: WTD: 3 sets of Teflon Leg Levelers
« on: July 11, 2017, 06:33:08 PM »
Found, and a lot cheaper than the ones on eBay too
https://www.alibaba.com/product-detail/Steel-PP-base-leveling-feet-Table_60454132310.html?spm=a2700.8443308.0.0.CJGC9e
€35 for 4 sets (16 pieces) arrived within 5 days from China to the Netherlands.
https://www.alibaba.com/product-detail/Steel-PP-base-leveling-feet-Table_60454132310.html?spm=a2700.8443308.0.0.CJGC9e
€35 for 4 sets (16 pieces) arrived within 5 days from China to the Netherlands.
15
'Business' Area : Buy/Sell/Trade / Re: Selling most of my collection
« on: July 08, 2017, 10:11:22 AM »
Great to see you so happy next to the game, we all know that feeling I think