1
Arcade Lifestyle / Re: I'm building my personal Gaming Room...
« on: January 09, 2022, 09:07:39 PM »
wow this is the heaven!
very good work
(i read all the 88 page
)
very good work
(i read all the 88 page
)
News:
ALS'/DLF' : your daily dose of Arcade Life Style...inside the Dragon's Lair!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Dragon's Lair / Space Ace / Re: Dragon's lair 3/4 cab build
« on: May 31, 2021, 09:26:42 PM »
thank you guys!!!!
the CRT did not fit there,it came out from behind by 10 cm but it was my first choice!
ehehe i know i know, but i already have concave button...but i will chage in the future if i find it!
thank you again!
and
"Lead on, Adventurer. Your quest awaits. "
the CRT did not fit there,it came out from behind by 10 cm but it was my first choice!
Quote
And also replaced the concave 'sword' buttons by convexes ones, to be a little bit more accurate?
ehehe i know i know, but i already have concave button...but i will chage in the future if i find it!
thank you again!
and
"Lead on, Adventurer. Your quest awaits. "
3
Dragon's Lair / Space Ace / Re: Dragon's lair 3/4 cab build
« on: May 30, 2021, 06:21:13 PM »
DONE!!!!!!
as hardware I used a raspberry pi 3b + with retropie and I started the cabinet with the ATARI version of the Dragon's lair with the Italian rom for an affective matter
the mythical blue screen
then using the exit key you can select other games which are:
Dragon's lair HD enhancement version
Dragon's lair Atari ITA
Dragon's lair ver F2
Space ace ATARI ita
Space ace HD enhancement version
ed infine
Dragon's lair II HD
i hope you like!!
see you!
Ciao
Alfredo!
as hardware I used a raspberry pi 3b + with retropie and I started the cabinet with the ATARI version of the Dragon's lair with the Italian rom for an affective matter
the mythical blue screen
then using the exit key you can select other games which are:
Dragon's lair HD enhancement version
Dragon's lair Atari ITA
Dragon's lair ver F2
Space ace ATARI ita
Space ace HD enhancement version
ed infine
Dragon's lair II HD
i hope you like!!
see you!
Ciao
Alfredo!
4
Dragon's Lair / Space Ace / Re: Dragon's lair 3/4 cab build
« on: May 30, 2021, 06:16:49 PM »
now let's move on to grouting the vines and painting
for painting I tried with spray cans + primer but I didn't like it at all so I opted for this film to cover the furniture bought on amazonhttps://www.amazon.it/gp/product/B07ZZ5XGRY/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
almost done!!!
just need the bar holding the marquee!
for painting I tried with spray cans + primer but I didn't like it at all so I opted for this film to cover the furniture bought on amazonhttps://www.amazon.it/gp/product/B07ZZ5XGRY/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
almost done!!!
just need the bar holding the marquee!
5
Dragon's Lair / Space Ace / Re: Dragon's lair 3/4 cab build
« on: May 30, 2021, 06:12:45 PM »
for the control panel I used a piece of panel from an old industrial electrical panel which I folded according to the adhesive and pierced the hole
first assembly test
for the monitor i used an old lcd 4:3 from Acer
to cover the monitor I made a piece of transparent plexiglass with a frame that emulated the depth of a crt monitor
first assembly test
for the monitor i used an old lcd 4:3 from Acer
to cover the monitor I made a piece of transparent plexiglass with a frame that emulated the depth of a crt monitor
6
Dragon's Lair / Space Ace / Re: Dragon's lair 3/4 cab build
« on: May 30, 2021, 06:08:15 PM »
then I started doing the graphics and everything else
for U-molding i bought this on ebay which was perfect for the thickness
first test for the controller and hardware i used Raspberry pi 3b+
being the smaller cabinet than the original I had to resize all the graphics
for U-molding i bought this on ebay which was perfect for the thickness
first test for the controller and hardware i used Raspberry pi 3b+
being the smaller cabinet than the original I had to resize all the graphics
7
Dragon's Lair / Space Ace / Dragon's lair 3/4 cab build
« on: May 30, 2021, 06:04:57 PM »
Hello everyone!
i'm Alfredo from Italy,like all of you i'm an huge fan of Dragon's lair
I always wanted the original game cabinet ... unfortunately a little for space and a little for the price and the delicacy of the player / laserdisc
I preferred to build one from scratch in the 3/4 version (arcade 1up type to be clear).
I took inspiration for the project and the measurements from my modified street figheter II arcade 1up, first I built it all in cardboard
then with the help of my friend Alessandro we started with the realization of the project
here's the "skeleton" of the cabinet
i'm Alfredo from Italy,like all of you i'm an huge fan of Dragon's lair
I always wanted the original game cabinet ... unfortunately a little for space and a little for the price and the delicacy of the player / laserdisc
I preferred to build one from scratch in the 3/4 version (arcade 1up type to be clear).
I took inspiration for the project and the measurements from my modified street figheter II arcade 1up, first I built it all in cardboard
then with the help of my friend Alessandro we started with the realization of the project
here's the "skeleton" of the cabinet
Pages: [1]