Dragon's Lair Fans - Arcade Lifestyle

General Chat => 'Business' Area : Buy/Sell/Trade => Topic started by: piero.a on January 08, 2015, 08:09:41 PM

Title: FS: Wico XY Pattern Generator Repro
Post by: piero.a on January 08, 2015, 08:09:41 PM
I've just let works the Wico XY Pattern Generator repro.

Schematic on the network has some inaccuracies so unluckily this first pcb release has several fixes.

Final PCB release is ready to send in production but I'm waiting to know the eventual interest.

Even enclosure will be available on request as you can see on photos even It's just a prototype and will be obviously improved.

Still don't know the exact price, just looking for interested people.

Thanks for your attention,

Piero

(https://dl.dropboxusercontent.com/u/34851970/Wico%20XY%20Repro/IMG_3234.JPG)

(https://dl.dropboxusercontent.com/u/34851970/Wico%20XY%20Repro/IMG_3235.JPG)

(https://dl.dropboxusercontent.com/u/34851970/Wico%20XY%20Repro/IMG_4906.JPG)

(https://dl.dropboxusercontent.com/u/34851970/Wico%20XY%20Repro/IMG_5004.JPG)

(https://dl.dropboxusercontent.com/u/34851970/Wico%20XY%20Repro/IMG_5005.JPG)

(https://dl.dropboxusercontent.com/u/34851970/Wico%20XY%20Repro/IMG_5006.JPG)

(https://dl.dropboxusercontent.com/u/34851970/Wico%20XY%20Repro/IMG_5007.JPG)

(https://dl.dropboxusercontent.com/u/34851970/Wico%20XY%20Repro/IMG_5008.JPG)

(https://dl.dropboxusercontent.com/u/34851970/Wico%20XY%20Repro/IMG_5009.JPG)
Title: Re: FS: Wico XY Pattern Generator Repro
Post by: level42 on January 08, 2015, 11:02:22 PM
Yes I'm interested. I guess it only creates the XY and Z signals so no power voltages for the monitor ?
Title: Re: FS: Wico XY Pattern Generator Repro
Post by: piero.a on January 08, 2015, 11:41:13 PM
yes it's right no voltage for monitor. Did you think could be interesting to have even a power supply for the monitor?

Here the instructions

http://arcarc.xmission.com/Test%20Equipment/Wico%20XY%20Pattern%20Generator/Wico%20XY%20Monitor%20Pattern%20Generator.pdf
Title: Re: FS: Wico XY Pattern Generator Repro
Post by: Mickey_Moose on January 09, 2015, 12:01:01 AM
Interested here (depending on price of course). ;)

Also suggest you post this over on KLOV as well (if you have not done so yet)
Title: Re: FS: Wico XY Pattern Generator Repro
Post by: piero.a on January 09, 2015, 12:08:55 AM
Interested here (depending on price of course). ;)

Also suggest you post this over on KLOV as well (if you have not done so yet)

I would like but I'm unable to make a post on KLOV because I have not permission. I asked several times but nobody answer me...  :(
Title: Re: FS: Wico XY Pattern Generator Repro
Post by: vernimark on January 09, 2015, 11:50:23 AM
I'm interested!  :spaceace: :spaceace:
Title: Re: FS: Wico XY Pattern Generator Repro
Post by: anunaki on January 09, 2015, 12:17:58 PM
This is for vector monitors only I guess?
Title: Re: FS: Wico XY Pattern Generator Repro
Post by: Luigi on January 09, 2015, 02:23:26 PM
This is for vector monitors only I guess?

Sccording to the manual, yes. AND for B/W-monitors...I still do not understand why b/w-monitor seem to work similiar to vector but no raster monitors :-\
Title: Re: FS: Wico XY Pattern Generator Repro
Post by: piero.a on January 09, 2015, 02:49:29 PM
This is for vector monitors only I guess?

Sccording to the manual, yes. AND for B/W-monitors...I still do not understand why b/w-monitor seem to work similiar to vector but no raster monitors :-\

Yes, it's only for vector B/W ad COLOR

Even a raster bar generator is available if you want. Small and working with just a 9V battery
Title: Re: FS: Wico XY Pattern Generator Repro
Post by: level42 on January 09, 2015, 05:00:05 PM
yes it's right no voltage for monitor. Did you think could be interesting to have even a power supply for the monitor?

Well...my dream is to be able to repair vectors on my workbench without needing any real vector game around.

However, that would mean having a range of power supplies on the bench too....

I fact, I started investigating all the various voltages that vectors need. I know the differences are "small" but they are big enough to damage monitors if you use the wrong voltages.

By the way, very cool that you got it running without the errors posted earlier on KLOV, well done !!!!

Title: Re: FS: Wico XY Pattern Generator Repro
Post by: level42 on January 09, 2015, 05:00:55 PM
Interested here (depending on price of course). ;)

Also suggest you post this over on KLOV as well (if you have not done so yet)

I would like but I'm unable to make a post on KLOV because I have not permission. I asked several times but nobody answer me...  :(

I'll see what I can do, there are more guys here that have KLOV accounts too.....let me figure it out....
Title: Re: FS: Wico XY Pattern Generator Repro
Post by: level42 on January 09, 2015, 05:03:13 PM
This is for vector monitors only I guess?

Sccording to the manual, yes. AND for B/W-monitors...I still do not understand why b/w-monitor seem to work similiar to vector but no raster monitors :-\


Uh.....I don't actually get what you mean my friend.....
Title: Re: FS: Wico XY Pattern Generator Repro
Post by: level42 on January 09, 2015, 07:02:08 PM
Piero, PM sent about KLOV registration !
Title: Re: FS: Wico XY Pattern Generator Repro
Post by: piero.a on January 09, 2015, 10:00:03 PM
Piero, PM sent about KLOV registration !
Thanks!
Title: Re: FS: Wico XY Pattern Generator Repro
Post by: level42 on January 09, 2015, 10:17:43 PM
Guys, let's help Piero to KLOV forum. Those who are already member there, please go to the following page, copy and paste his user name there:

pieroandreini


http://www.arcade-museum.com/members/wm-upgrade-user.php


and click on "Upgrade".

I did it, but might help if a couple more guys do it.
Title: Re: FS: Wico XY Pattern Generator Repro
Post by: Muerto on January 10, 2015, 06:41:08 AM
Done..
Title: Re: FS: Wico XY Pattern Generator Repro
Post by: piero.a on January 10, 2015, 07:32:51 AM
Thank so much!!!
Title: Re: FS: Wico XY Pattern Generator Repro
Post by: Etienne MacGyver on January 10, 2015, 09:57:05 AM
Looks like its already done:

Quote
Upgrade Forum Friend for http://forums.arcade-museum.com/
All prospective forum users have to either (1) be approved by an existing user, or (2) donate $2+ before being allowed onto the forums.

Attempting upgrade (from group Pergatory to Regular User): pieroandreini

ERROR: Nothing updated

User is already in a usergroup other than "Pergatory"


Title: Re: FS: Wico XY Pattern Generator Repro
Post by: blackie63 on January 10, 2015, 11:19:22 AM
interested YES  ;D
Title: Re: FS: Wico XY Pattern Generator Repro
Post by: speleo_de on January 12, 2015, 05:07:11 PM
Interested as well - good work, Piero :-
Title: Re: FS: Wico XY Pattern Generator Repro
Post by: Luigi on January 13, 2015, 08:27:13 AM
Interested as well - good work, Piero :-

welcome back ;)
Title: Re: FS: Wico XY Pattern Generator Repro
Post by: level42 on January 13, 2015, 10:06:57 AM
Interested as well - good work, Piero :-

welcome back ;)
+1 !!!!!
Title: Re: FS: Wico XY Pattern Generator Repro
Post by: vernimark on January 13, 2015, 12:55:17 PM
Guys, let's help Piero to KLOV forum. Those who are already member there, please go to the following page, copy and paste his user name there:

pieroandreini


http://www.arcade-museum.com/members/wm-upgrade-user.php


and click on "Upgrade".

I did it, but might help if a couple more guys do it.

great! I never found this function; I'm very happy piero is in KLOV now!
Title: Re: FS: Wico XY Pattern Generator Repro
Post by: piero.a on January 22, 2015, 07:04:31 PM
Hello everybody,

finally I have prices:

- Bare PCB 25€
- Complete PCB Assembled + all needed for front and rear panels (switches etc) excluded *transformer and wires 90€

I'm waiting to know the cost of drilled panels with silkscreen

Title: Re: FS: Wico XY Pattern Generator Repro
Post by: speleo_de on January 23, 2015, 09:48:27 AM
Hello everybody,
finally I have prices:
- Bare PCB 25€
- Complete PCB Assembled + all needed for front and rear panels (switches etc) excluded *transformer and wires 90€
I'm waiting to know the cost of drilled panels with silkscreen

And still interested ;-)