Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - PaulSwan

Pages: 1 2 [3] 4 5 ... 53
31
Those crimp pins in Bela's photo are not the right pins for the AMP Modu I connector housing, see the DigiKey photo.
https://www.digikey.com/en/products/detail/te-connectivity-amp-connectors/280702-1/1150100

32
The series is called "AMPMODU Mod I" and they have a variety of contacts for the series. This list link *may* work:

https://www.digikey.com/en/products/filter/rectangular-connectors-contacts/331?s=N4IgjCBcoLQCxVAYygMwIYBsDOBTANCAPZQDaIAzABwBMADCALqEAOALlCCAL69A

It appears I've been using 280702-1 "tin contacts" (that I got from Mouser):
https://www.digikey.com/en/products/detail/te-connectivity-amp-connectors/280702-1/1150100

...but there are gold ones as well if you like flash ;)
https://www.digikey.com/en/products/detail/te-connectivity-amp-connectors/280621-1/2263241

Paul.


33
Arcade Lifestyle / The Zaccaria WWW Picture Archive 2020
« on: January 09, 2021, 09:01:26 PM »
Hi,

http://www.zzzaccaria.com/zzz/photos_www_2020.htm

Despite the challenges of 2020 two new cabinet styles were discovered:
 - An Astro Wars bar top
 - An alternate Universal design



Thanks,
Paul.

34
Hi,

I was shocked to find that these old AMP Italy connectors are actually still in stock:

https://www.digikey.com/en/products/detail/te-connectivity-amp-connectors/280593/1130917

Paul.

35
Arcade Lifestyle / Re: Zaccaria Robot
« on: January 06, 2021, 03:40:29 PM »
Looks like a very nice one as well :)

36
Arcade Lifestyle / Re: Finally after many years, the zacc is comming home !
« on: November 18, 2020, 06:31:27 PM »
That's just too new & shiny :)

37
Arcade Lifestyle / Re: Finally after many years, the zacc is comming home !
« on: November 04, 2020, 05:02:09 PM »
Looks like you're are missing sync on the MTC-900 - possibly the PCB is set the wrong sync polarity or the MTC-900 video input connections aren't correct.

38
Hopefully you can find a better marque than that Crazy Kong one in the picture ;)

39
Arcade Lifestyle / Zaccaria Crazy Kong restoration completed
« on: September 26, 2020, 04:45:24 AM »
Hi,

Completed this restoration, slightly more involved than previous ones:

http://www.zzzaccaria.com/zzz/CrazyKongRestoration.htm



Thanks,
Paul.

40
Arcade Lifestyle / Re: Zaccaria Pac & Paint
« on: September 03, 2020, 05:52:34 PM »
Nice original example!
Paul.

41
Thanks! Printed and installed:



Paul.

42
Hi,
Etienne did the work to scan and vector the complete control panel with artwork a few years ago, but I have an original none-AVG panel that has a window for the instruction card and I need to make a repro instruction card to go in it. Does anyone have a PDF or hi-res image of the restored full CPO I can print for the instruction portion or just the card portion?
Thanks,
Paul.

43
Arcade Lifestyle / Re: Zaccaria Vanguard restoration completed
« on: May 22, 2020, 11:54:45 PM »
It's dedicated, just they used the same run of cabs I think.
Paul.

44
Arcade Lifestyle / Re: Zaccaria Vanguard restoration completed
« on: May 22, 2020, 02:53:09 AM »
GoDaddy say ~6hrs to back up.

45
Arcade Lifestyle / Zaccaria Vanguard restoration completed
« on: May 20, 2020, 05:34:52 PM »
Hi,

Straight forward restoration since the machine was already in excellent original condition.

http://www.zzzaccaria.com/zzz/VanguardRestoration.htm



Thanks,
Paul.

Pages: 1 2 [3] 4 5 ... 53