Dragon's Lair Fans - Arcade Lifestyle
General Chat => Artwork => Topic started by: Etienne MacGyver on December 07, 2011, 11:59:14 AM
-
Anyone here got these on theyre cabinet ? :
(http://www.opdenkelder.com/pics/alusticker/redwarning1.jpg)
and
(http://www.opdenkelder.com/pics/alusticker/redwarning3.jpg)
If so, could you help me out with a straight picture and measurements in millimeters ?
The guy who send me the first does not have it on his cab anymore, and it was destroyed :(
Any help is appriciated ;)
-
shame on that guy :P
-
shame on that guy :P
Thats not helping ;) ;D
-
Rich from this old game send me a 300 DPI scan of the second one, so "one down, one to go"
Why did that guy destroyed that first etiket.... :'(
Maybe he can measure the glue residue dimentions ;) ;) ;)
-
Why did that guy destroyed that first etiket.... :'(
i've just asked him: he thought he could get it off in one piece ... we know the result!
Maybe he can measure the glue residue dimentions ;) ;) ;)
he can't, because the cabinet has been fully restored!
-
Why did that guy destroyed that first etiket.... :'(
i've just asked him: he thought he could get it off in one piece ... we know the result!
That's because he didn't have Un-du yet ! (I think ;) )
-
he can't, because the cabinet has been fully restored!
Ah, that why you need a replacement ;D ;D ;D
Which cabinet was it on Ully ?
-
That's because he didn't have Un-du yet ! (I think ;) )
agreed! has anyone tried the product yet?
Which cabinet was it on Ully ?
gauntlet
-
Well, the french translation is awful ;D !
edit : a better translation in my opinion ->
ATTENTION
De hautes tensions sont présentes derrière ce panneau. Il n'y a pas de parties utiles à l'utilisateur à l'intérieur.
Se référer à un personnel qualifié pour toute intervention. Pour prévenir les risques de choc électrique, déconnecter le câble d'alimentation avant toute intervention.
-
he can't, because the cabinet has been fully restored!
Ah, that why you need a replacement ;D ;D ;D
Maybe you should design a red warning label with the following text:
Warning: any attempts trying to remove warning labels on this cabinet will render the labels useless.
;D ;D ;D ;D
@JCP, should stay original, bad text or not. You should know how insanely stupid (but thus also insanely funny) the Dutch instruction card on my Berzerk is, but I would never dream of replacing/improving it !!!
-
I cana make one variant just for fun ofcourse ;D
-
Of course, the original sticker is the only way to go ;).
-
2 etikets ready:
(http://www.opdenkelder.com/pics/alusticker/19.jpg)
Special thanks to Rich from This Old Game for providing the pictures, measurements and the pantone colorcode :spaceace:
only 1 more to go and i think i got all the variants ready.
-
can you print those on a white base as well - like the originals?
-
that is possible, only i dont know the price then, since its a "new" job then, so there are startup costs involved.
however, if the guy from klov wants his also on whit, then there is a higher number of stickers there, and then it could be interesting to calculate that.
Is it paper based, or vinyl based ?
If its paper based, it might be worth a shot to use a color laser printer on sticker paper..
i am at a customer today with a good quality digital color copier, i'll ask if they have sticker paper and if they do, i can give it a try on that to see the results.
if its vinyl based, then its nessecasy to print some higher numbers to justify the costs.
-
vinyl-based
-
Okay thanks, so i need to let the profi printer do that.
I have done a test anyway;
the etikets on this A4 sized sheet is 53x70 mm. and has rounded corners.
The original sticker is 50,8x62 mm
I have centered them on the etikets and made the red "overlapping"
I must say that it looks pretty good although its paper based..
(http://www.opdenkelder.com/pics/alusticker/red/1.jpg)
(http://www.opdenkelder.com/pics/alusticker/red/2.jpg)
I installed one on a "door" from a pc here..
(http://www.opdenkelder.com/pics/alusticker/red/3.jpg)
Pretty convincing :D
(http://www.opdenkelder.com/pics/alusticker/red/4.jpg)
the plan i have is to let the profi printers do the vinyl, and i'll add in these as a bonus to your orders ;)
-
Great job. ;)
-
i think they look kickass and they would totally do it for me. where did you have those printed and cut to shape?
-
hehe ;D
My customer had a box of these etikets, and a digital copier (SHARP MX-4100N with a postscript module) (http://www.sharpusa.com/ForBusiness/DocumentSystems/MFPsPrinters/MX4100N.aspx)
so i just stretched the red part over the precut etikets (http://www.etiketten.nl/catalog/product_info.php?products_id=329) (floppy labels to be precise) and presto :P
the size is a bit different than the original, and this is the only etikets they had, so i cannot do the other variant that you need like this.
anyway, there is going to be a run on white vinyl, there are enough numbers ordered on klov to justify costs..
Check the post here if you like :
http://forums.arcade-museum.com/showthread.php?t=208817 (http://forums.arcade-museum.com/showthread.php?t=208817)