Dragon's Lair Fans - Arcade Lifestyle

General Chat => Technical Area => Topic started by: polderarcade on July 02, 2011, 12:23:07 PM

Title: Screen(tv scard) problem need some input
Post by: polderarcade on July 02, 2011, 12:23:07 PM

At the moment trying to hook up a hang on to a tv scard
But the image only has red green and blue no white and other collers
I know some of you guys did the same any idée where to look at my tech experience is not that high but its improving slowly
(http://i1090.photobucket.com/albums/i380/polderarcade/DSC02321.jpg)

Connected like this

Red board to red scard
Blue bard to blue scard
Green board to green scard
Sync board to sync scard
Al return togetter to ground

Title: Re: Screen(tv scard) problem need some input
Post by: italiandoh on July 02, 2011, 02:01:20 PM

It is SCART, not scard.
Post the SCART pins you've used and we'll verify if you did it right.

Matteo

Title: Re: Screen(tv scard) problem need some input
Post by: polderarcade on July 02, 2011, 02:19:52 PM

Sorry scart, its weekend 8)

And I’m typing with spelling control of word

Working whit this one at the moment

http://www.geocities.ws/podernixie/htpc/cables-en.html#jammascart (http://www.geocities.ws/podernixie/htpc/cables-en.html#jammascart)

jamma to scart
Little different from the first setup
but the same results, on screen the images in red/blue/yellow?

Title: Re: Screen(tv scard) problem need some input
Post by: DarthNuno on July 02, 2011, 02:42:11 PM

Just send 5V to the pin 16 of the scart connector. It'll switch your TV into the RGB mode and it will solve your problem  ;)

Title: Re: Screen(tv scard) problem need some input
Post by: polderarcade on July 10, 2011, 02:43:42 PM

Nuno thanks I believe I tried it before,
Bud after connecting pin 16 to 5 volts screen  image is oke :D
First time I dit it wrong I think

So after two years of storage hang on the luxe is riding again  :lol:

Title: Re: Screen(tv scard) problem need some input
Post by: Etienne MacGyver on July 10, 2011, 05:17:59 PM

Cool !