Dragon's Lair Fans - Arcade Lifestyle

General Chat => Technical Area => Topic started by: PaulSwan on June 23, 2011, 07:02:38 AM

Title: Jack is back!
Post by: PaulSwan on June 23, 2011, 07:02:38 AM
The Hantarex 900E/USA in Zaccaria Jackrabbit was dead with at least a blow LOPT after the show...

(http://www.zzzaccaria.com/photos/Jackrabbit/TN/SAM_9015w.JPG)
http://www.zzzaccaria.com/photos/Jackrabbit/SAM_9015w.JPG (http://www.zzzaccaria.com/photos/Jackrabbit/SAM_9015w.JPG)


It appears the LOPT committed suicide and was not murdered by the HOT or anything else on the chassis. Started up fine with the new LOPT in...
 
(http://www.zzzaccaria.com/photos/Jackrabbit/TN/SAM_9054w.JPG)
http://www.zzzaccaria.com/photos/Jackrabbit/SAM_9054w.JPG (http://www.zzzaccaria.com/photos/Jackrabbit/SAM_9054w.JPG)

The focus is stronger with the new HR Damien LOPT - the original one that blew needed the focus maxed out to pull in.

(http://www.zzzaccaria.com/photos/Jackrabbit/TN/SAM_9055w.JPG)
http://www.zzzaccaria.com/photos/Jackrabbit/SAM_9055w.JPG (http://www.zzzaccaria.com/photos/Jackrabbit/SAM_9055w.JPG)

Next is to fix the spare main PCB that lost video sync output a week before the show...

Paul.
Title: Re: Jack is back!
Post by: Belike on June 23, 2011, 08:40:31 AM
Nice job, where did you get that LOPT?
Title: Re: Jack is back!
Post by: vernimark on June 23, 2011, 02:39:44 PM
that looks great!
Title: Re: Jack is back!
Post by: Etienne MacGyver on June 23, 2011, 02:41:19 PM
Quote from: Belike on June 23, 2011, 08:40:31 AM
Nice job, where did you get that LOPT?

forget it bela, we need the euro version, not the 900/e  >:(
Title: Re: Jack is back!
Post by: Belike on June 23, 2011, 03:54:56 PM
Quote from: Etienne on June 23, 2011, 02:41:19 PM
Quote from: Belike on June 23, 2011, 08:40:31 AM
Nice job, where did you get that LOPT?

forget it bela, we need the euro version, not the 900/e  >:(
:-\
Title: Re: Jack is back!
Post by: PaulSwan on June 23, 2011, 06:28:53 PM
The LOPT for the 900E and 900E/USA are the same (the only difference in the USA chassis IIRC is that it's powered from a single 120V supply and the power connector is a WG/G07 style connector on a fly lead).

Bob Roberts has 900E LOPTs (the HR Damien replacement), $40...

http://www.therealbobroberts.net/ (http://www.therealbobroberts.net/)

Paul.


Title: Re: Jack is back!
Post by: Etienne MacGyver on June 23, 2011, 09:13:32 PM
i know that the usa and euro version of the 900E are the same, because its the same chassis afaik

the 900 (without the E) is different, that has split hv cable that leads to the pot on the neckboard..
Title: Re: Jack is back!
Post by: PaulSwan on June 23, 2011, 10:09:48 PM
I see Swallow in the UK doesn't seem to have either LOPT for 900 or 900E in stock. Are 900 LOPT's no longer available? :(
Title: Re: Jack is back!
Post by: Belike on June 23, 2011, 10:17:05 PM
Quote from: PaulSwan on June 23, 2011, 10:09:48 PM
I see Swallow in the UK doesn't seem to have either LOPT for 900 or 900E in stock. Are 900 LOPT's no longer available? :(
Unfortunately not, I checked all sources around the world.  :-\
If somebody would start to manufacture them, he could earn good money with it.
Title: Re: Jack is back!
Post by: PaulSwan on June 23, 2011, 10:37:25 PM
Well that's distressing since I have a lot of cabs withh 900's in :(