Dragon's Lair Fans - Arcade Lifestyle

General Chat => Technical Area => Topic started by: baritonomarchetto on December 11, 2010, 11:17:56 AM

Title: Some measure needed for Punch Out CP repro
Post by: baritonomarchetto on December 11, 2010, 11:17:56 AM

Hi all,

having not found up to today a reasonably priced original Punch-Out control panel, i am evaluating the home made way (a freind of mine has a bender so i will ask him for "cheap" help  :lol:).

To do so, i do need some measure of the panel  :arrow:

(http://img163.imageshack.us/img163/1847/punchoutpanelrepro.jpg)

In addition to these 4 data, i would need the thickness of the panel and eventually some dimension i am missing  :pac:

Could someone here help on this  ;)

Thanks a lot

Title: Re: Some measure needed for Punch Out CP repro
Post by: Muerto on December 11, 2010, 10:11:28 PM

Hi!

I have an original Punch Out, but my CP don´t look like the one you have drawn....:
The measures you have to devide with 10 to get in mm (millimeter) - hope this is usable  :)
And the thickness of the metal is 2mm.

(http://www.opdenkelder.com/muerto/arc/PunchOut 001.jpg)

(http://www.opdenkelder.com/muerto/arc/PunchOut 003.jpg)

(http://www.opdenkelder.com/muerto/arc/PUACCURATE.png)

The 25, 52, 178 and 30 is the ARC length..

Grap the CAD file HERE (http://www.opdenkelder.com/muerto/arc/PUCP.zip)

Title: Re: Some measure needed for Punch Out CP repro
Post by: baritonomarchetto on December 12, 2010, 10:49:24 AM

Thank you VERY much Muerto  :)

I have never seen the profile of an original PO CP, so my drawing was only a poor attempt  ;)

Could you please give me also the width?

many thanks

Title: Re: Some measure needed for Punch Out CP repro
Post by: Muerto on December 12, 2010, 11:14:28 AM

You're welcome  ;)

And the width is 598mm