Hi!
Bought a G07 who seem to be completely dead. Recapped it as well as change of the flyback & the parts kit from Ian Kellog.
Now it's alive! However, the B+ is too low (should be 120)
First it was 113,7 when the G+ pot was turned all the way. I got a few tips & checked the resistors R908, R912 & FR901, they are all good.
The filter cap shows 612uF. Should be 680uF but I guess that's fine(?)
I also changed the B+ pot with a pot from a spare G07.
Now it shows 118,2V so quite an improvement. But is it good enough? Since I'm kinda new to all this I'm not quite sure what a low B+ can lead too & what the accepted error range is.