OK, as requested, let's scan of the instructions sticker from my Buggy Boy *triple screen*
![Cool 8)](http://www.dragonslairfans.com/smfor/Smileys/default/cool.gif)
![](https://www.dragonslairfans.com/buggy_boy/buggy_boy_instructions_0.jpg)
As you can see, the only way to properly scan it is ... to remove the top panel... which is fortunately quite easy : only 3 screws!
![Smiley :)](http://www.dragonslairfans.com/smfor/Smileys/default/smiley.gif)
![](https://www.dragonslairfans.com/buggy_boy/buggy_boy_instructions_1.jpg)
Arg, too bad... the sticker is slightly bigger than my A4 scanner
![confused :?](http://www.dragonslairfans.com/smfor/Smileys/default/icon_confused.gif)
So two passes will be needed...
![](https://www.dragonslairfans.com/buggy_boy/buggy_boy_instructions_2.jpg)
But here it is :
![](https://www.dragonslairfans.com/buggy_boy/buggy_boy_instructions_full.jpg)
(the big .tif file is available
here)
As you can see, my sticker is not perfect... and you can see the 'assembling' border. Anyway it's a good start for the illustrator and other vectors softwares expert guys here!