PAC MAN - Scratch Built Replica

[petieken]

Good work!
It seems like Bruno has set the standard with his anti-rust bath and sanding method 

[scr33n]

Good work!
It seems like Bruno has set the standard with his anti-rust bath and sanding method 

Thanks!!!

yes, I took many ideas from Bruno 

.... Today I can apply the new overlay on CP:



let's go ......



perfect:





the control panel riassembled .... like new 





 

and today I can also assemble the cab (paint dry):









the cab is ready for new kickarts and sidearts ........ 

 

[DarthNuno]

Lovely 

What you're doing is great, and very helpful for others  I mean publishing a maximum of pictures is the best way to show how to do things !

The end is near... but beware, applying these HUGE vinyls is not very hard BUT you've to do it very carefully and slowly, and with the help of someone else to help you.

 

[scr33n]

Lovely 

What you're doing is great, and very helpful for others  I mean publishing a maximum of pictures is the best way to show how to do things !

The end is near... but beware, applying these HUGE vinyls is not very hard BUT you've to do it very carefully and slowly, and with the help of someone else to help you.

 

Thanks Bruno !!!

I know I know, tomorrow is the big day  and I have already asked to my girlfriend to help me  ,
   
today I have read at least 10 times your Pacman cab topic  (sidearts installation session  )

see you tomorrow for updates 

[logan]

great work, keep it up! 

Could you tell me what the total height of the cab is?? 

[Sonic 1992]

Glossy Friggin' Beautiful!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 

Can't wait to see it finished! 

OutStanding!

[scr33n]

Thanks again guys 

the most difficult part .......... Twobits sideart applications.... let's go  :

I start with kickarts:

take the right measures:



ok I can cut it:



test on cab for right position:



ok, let's go  don't do it alone 





everything seems ok ....








 

  SIDEARTS

[scr33n]

Sidearts are very big .... and the job is more difficult ....

let's take the right measures and position:



right position:



with the help of my girlfriend I can start to paste the first sideart:
 






ok, I don't see airbubble  I hope .....





the other side ...... measures .. measures ... etc .....  :








the job is done .... and now the best part  :

 

[scr33n]

I start to remove the protective layer:

kickarts:





and sidearts:











wonderfull !!!! 

  TMOLDING

[DarthNuno]

There was nothing...











... and after an *AMAZING* job...










Ladies & Gentlemen...











PLease Welcome....






















PAAAAAAAAAC MAAAAAAAAAAAAAAAAAAN!!!!!!!!!!!















 

[scr33n]

Tmolding installation:










coin door:



marquee (Original one from US):










and the control panel (not yet connected):





almost finished (still missing bezel and electronic parts):



 

[DarthNuno]

 



  Wonderful  One more item (the glass bezel)... and ...it's done ?!

AMAZING !!!

[scr33n]

Yes Bruno, I should receive it on Thursday 

Could you tell me what the total height of the cab is?? 

Ok Logan, total height without legs leveler 171 cm, with legs leveler about 173 cm 

[Dazza]

 

<Clap Clap> Good job, looking great!

[scr33n]

Today I finished the electric part:


control panel:



and like Galaga project ............. the magix box (power On/off tv , pc on/off and reset, volume knob and IPAC controller  ALL IN ONE BOX ):

inside:



outside:



control panel and magic box connected together with two 9pin serial cable:



works perfectly 

inside the cab:



all connected to:



and everything power on with this original pac power switch: