i need some advice

[level42]

That's a nice thread DK1, I mean Gyruss....

Mameing would really be a shame for a game like that IMHO.

[Equites]

The Chair rumbling constantly could be a sign of a problem with the PCB stack in the cage, or simply a relay fault.  Do not let the chair rumble constantly or you will burn the motor out.

I would do as Alpha1 suggested, and unscrew the cage and re-seat the PCB stack, remember where everything goes!

For the screen, attempt to adjust the focus on the LOPT/Flyback on the monitor chassis.  Be careful though, not easy to access these, use a plastic or ceramic adjuster/screwdriver if you can to reduce risk of possible shock.

You can unscrew the plastic cover on the controller to access the internal pots, and simply adjust it.

The lamps are only supposed to flash when you get hit.

Good luck, its an awesome game.  I regret selling mine, but you need a big place for these.  I think it's pretty cool that you managed to save these in Lebanon.

Equites thank you so much you saved my starblade 

ok 3 small problem

1 the chair keep on rumbling like crazy out of control so i had to plug it out

2 the screen is a bit out of focus

3 and the gun is not centered i should turn it slightly to the right so i can center my shooting

and what up with these annoying flash lamp that keep on flashing is that normal?? 

is there a way to calibrate the gun

oh and i forgot to mention all the games i got have no keys so eventually i have to drill them and change the locks
so my question is where the dip-switch located in starblade ??

i cant find it on the back

thank you in advance

[carlo3do]

thanks guys for helping me out i really appreciate that 

now i followed the instruction you gave me

1 the rumble chair is fixed by itself after i opened the back of the chair and rechecked the cable of the rumble motor now its working perfectly only when i get shot it will rumble

2 the screen i tried to play with the calibration screw with no luck i even got a professional technician he look at it and tried to calibrated also no luck he told me that the screen is dead and he have a machine that can fixed it he want 30$ it will be like new he is coming today to fix it

3 my biggest problem is the missing gfx i did what u guys told me i removed all 4 pcb from the cage i cleaned all the connection with a spray called wd40 and i instal d them as they were still same problem i even searched for a reset button on the pcb with no luck the only reset button i found is inside the coin door and still no go 

now when i was opening the cage i realized that some screw are loose that mean someone before me opened this up is it possible that the last 2 bottom pcb are missed place cause i know that the 1 have all the light and the second have the harness connector

is there a manual that show me if the r installed right??

please feal free to give me any other suggestion 

and Equites thank you for the encouraging words 

[Alpha1]

Hi,

don't use WD40!! Make sure you clean all that off right now.

[carlo3do]

sorry about that Alpha1  i just checked the can its not WD40 its CN-20 ELECTRONIC CLEANSER (DRY)

its for cleaning contacts

[level42]

Already not a fan of any contact spray but WD-40 is killer.... luckily you used "normal" contact spray.

[carlo3do]

ok as i gave up on my starblade  

i went ballistic and ordered a full working PCB 800$ + shipping fee around 230$  

lets hope it arrive safely and as described

 

[Muerto]

  COOl!!!!!
Do you have your own oil well?? 

[carlo3do]

COOl!!!!!
Do you have your own oil well?? 

  actually no but i own this

www.gamesstationretro.com

 

[Alpha1]

You shold have asked here. I have spare working Starblade pcbs and would have sold you one cheaper than $800!!!

[DarthNuno]

You shold have asked here. I have spare working Starblade pcbs and would have sold you one cheaper than $800!!!

I'm looking for one spare ! PM'me a decent price please

[level42]

Market value just went up

[carlo3do]

ITS OK  what been done is done my bad but Alpha1 you did know i have a defect PCB wy dident you say something i searched all the net for one and by chance i found one on ebay it was listed last week the guy wanted 995$ for it  his title say (VERY RARE STARBALDE WORKING PCB) and what do you know i fell in love 
after alot of pms of nagging on his head he agreed to lowered to 800$ cause i explained to him that it will be shipped oversea

its ok now finger crossed and lets hope it arrive safely and working   

[carlo3do]

i will ask her first any member have sega outrun cpo like this one for sale 

[carlo3do]

hi guys can someone help me dissemble out run bezel like the pic above 

and by the way my starblade pcb got stolen and never arrived