Author Topic: Hantarex MTC 90 (Read 5170 times)

vernimark · « **on:** October 12, 2011, 04:09:21 AM »

Hi All, I've a question for you.
I have an Hantarex MTC 90 working on a 14'' tube. Do you know the difference with the 20'' version?

thank you,
vernimark

Etienne MacGyver · « **Reply #1 on:** October 12, 2011, 08:55:12 AM »

Euhh, 6 Inch ?

level42 · « **Reply #2 on:** October 12, 2011, 09:25:56 AM »

No idea. IIRC there was a dead 19" in one of my machines and I searched info but I decided to scrap it. The set up with all those modules is a big PITA.

vernimark · « **Reply #3 on:** October 12, 2011, 11:12:41 AM »

I don't have so much arcade monitors, so I'm beginning to reclycle everything. If squared enough I'll recycle my syster ass too

Blanbek · « **Reply #4 on:** October 15, 2011, 11:09:30 AM »

Hello,

if I don't talk nonsense

the pin of the tube is not the same?

electronics will not work long with a 20 inch in place of 14 inch $:-\$

vernimark · « **Reply #5 on:** October 19, 2011, 07:31:20 PM »

I could see the neck board is different, because the tube connection is smaller...
but inside the manual I couldn't find any other significant difference.
Anyway I'll store it with its tube for future use

It means I'll meet a coktail table soon

vernimark

PaulSwan · « **Reply #6 on:** November 10, 2011, 07:58:24 PM »

One thing I really really *really* dislike about this forum is the silly restriction on how many new topic emails are sent. After a short number no more are sent and reading a specific topic doesn't reset it. It's really annoying having to try and figure out which boards have new topic emails "locked out" because the limit's been reached. Is there a way to fix that?

Of course, I have an MTC-90 manual and can scan it for you if there isn't one already scanned online.

Paul.

PaulSwan · « **Reply #7 on:** November 14, 2011, 05:40:21 PM »

I checked my MTC-90 manual and it's almost identical to the existing one you have online and only mentions the 20" version.

If it's like other monitors I've seen, differences between the 14 and 20 editions is sometimes the neck board and sometimes the LOPT.

Paul.

vernimark · « **Reply #8 on:** December 07, 2011, 03:30:50 AM »

Hi Paul,
could you verity if your MTC 90 manual is the same I uploaded some time ago please?

http://www.vernimark.com/arcade/archive/monitor/mon_rc_mtc90.pdf

thank you,
vernimark

PaulSwan · « **Reply #9 on:** December 07, 2011, 04:17:12 AM »

Yes, it is, mine looks like a slightly different printing but it still only has the 20" in it.
Paul.

News: