Dragon's Lair Fans - Arcade Lifestyle
September 27, 2020, 06:28:26 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: ALS'/DLF' : your daily dose of Arcade Life Style...inside the Dragon's Lair!
 
   Home   Help Search Calendar Gallery Login Register  
Pages: 1 2 3 [4]
  Print  
Author Topic: :: Belgium Roadtrip :: Quest for SEGA G-Loc Deluxe ::  (Read 50578 times)
DarthNuno
Administrator
ArcadeLifeStyler'
*****
Posts: 11624


Singe's castle


View Profile WWW
« Reply #45 on: December 29, 2013, 12:03:53 PM »

hi guys,

i know this is a old post but i just got a G-loc DX and just seeing how everyone else is going with theirs?

Have a look right here  Cool
Logged

Thargor
Jr. Member
*
Posts: 2


View Profile
« Reply #46 on: February 08, 2019, 06:26:25 AM »

Hi

this is my first post here and I have directly a request:

we have here in Germany an Arcade Museum (look at Facecbook https://de-de.facebook.com/Retro-Nerds-M%C3%BCnsterland-1710193545940225/) and now we are a proud owner of a Sega G-Loc, too.

But there is a big problem, we donīt have these two leveling  DC motors. So I need some information what kind of motors are these, wich voltage, I need perhabs a ID Number an do you have information where we can buy (used) two of these motors? And you can send maybe an *.pdf of the manual and electric wiring.



Sorry for so much questions, but it seems you are the only one who can have all this information for us.

thanks for you help!

Kind regards, Thargor



* g-loc.jpg (300.45 KB, 2048x1152 - viewed 210 times.)
« Last Edit: February 08, 2019, 06:31:31 AM by Thargor » Logged
DarthNuno
Administrator
ArcadeLifeStyler'
*****
Posts: 11624


Singe's castle


View Profile WWW
« Reply #47 on: February 09, 2019, 01:46:50 PM »

HI Thargor,

As far as I know schematics for GLOC motor drivers boards are not unavailable.
But 'gc339' from the french board gamoover has done a massive 'reverse engineering' work to figure out how it works... and so how to repair it.
Here's the topic in french.
He successfully repaired few of them.
It's really hard to find motor drivers boards nowadays, and especially working one, and no one didn't reproduced them new so far.
A great project have been done recently -> reproduction of Outrun/Space Harrier DLX Compatible Motor PCBs (see here). These are very close to the ones from those in GLOC, but unfortunately not the same...
Logged

Thargor
Jr. Member
*
Posts: 2


View Profile
« Reply #48 on: February 09, 2019, 04:15:21 PM »

Hi
  thanks for the reply.

we have the motor driver board for both motors, but still no motors.

So what I need is info about the motor themselves. Wich Voltage is used an idea we can get someone or if we can use other motors.

Logged
Sydster
Jr. Member
*
Posts: 1


View Profile
« Reply #49 on: September 25, 2020, 08:37:57 AM »

Hey Arcaders,

long time ago i baught a G-Loc Deluxe cab..
The owner told me it is working ; only the CRT is broken.

When I opened it up (this summer) i found a lot of grass; dirt; and dead rats in it!

All control LED (POwer indicators) are glowing ; Mainboard; Motor Boards; all fans are on;
but unfortunately; the game does not boot up.

I talked a lot with "irepairsega" in USA ...Ken; but in his oppinion the mainbord PCB of the game is fried.

As i wastet years for repairing my Thunderblade Cab; before i just put a raspery (retropie4) into it and connected all the inputs to the Xbox360 controller (works great).
also Afterburner one and two; abd AB Cop are now on that cab; as it is quite similar.

this time i do not want to waste years on trying to find parts that will never work.

SO the question is; does anyone know how these MOTORS "really" work? wiring ? technical documentation?
I ordered some power units from china; 80V to 110V choosable;
I will try by myself ; and try to find out what the wires mean;
one guy from youtube meant, it is ; one for the direction; three for the speed; with 5v?  maybe...

so the idea is ; using Retropie; i can simulate the G-Loc Mame; check....alredy working; all inputs from the cab with a X-Box controller; ....check working;
maybe the emulator puts also out the information in 8bit (because there is a AD DA compiler in the machine) ; i wrote a lot of questions to the forum of the emulator software; we will see;

second ; easy plan;
i take the three wires from the joystick (potentiometer) and go to an arduino; that controlles 2 new electric motors; but ? 12,5Nm electric motor enough? we will see
https://www.ebay.de/itm/12Nm-6A-Nema-34-Closed-Loop-Schrittmotor-Stepper-Motor-Driver-60V-Power-Supply/392913419345?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20170511121231%26meid%3Ddfeb5db4a64e496c995135ac5af91012%26pid%3D100675%26rk%3D1%26rkt%3D15%26mehot%3Dnone%26sd%3D392913419345%26itm%3D392913419345%26pmt%3D1%26noa%3D1%26pg%3D2380057&_trksid=p2380057.c100675.m4236&_trkparms=pageci%3A4eeda48a-fef9-11ea-8d7c-d2b65774437a%7Cparentrq%3Ac3f954131740ad33e33dafaffffe981c%7Ciid%3A1

controle with the arduino

https://www.youtube.com/watch?v=3odRT6zdzqk&list=PLzPCh3dINAB8ifngDKQSLLadT4Sr2z3PP&index=3&t=303s
https://www.youtube.com/watch?v=dQuTgngoFPQ&list=PLzPCh3dINAB8ifngDKQSLLadT4Sr2z3PP&index=4&t=11s

we have to write a small sketch for it...

any ideas; help ?
i think this could bring back a lot of these cabs to life;
and all original parts can be still inside; or can be put into again easily.

i will try to find a location for pictures that will not be thrown away after some weeks and post them; i hate free picture upload pages!
Logged
Pages: 1 2 3 [4]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!