Alu sticker repro run

[level42]

Wohoooo, thank you Etienne !!! Thought this would be a piece of cake, but still a lot of work !!!

This is going to look sweet !

[Etienne MacGyver]

Just some quotes..

Hi Etienne,
Got the stickers yesterday, they look SUPER!!
Thanks again for taking this project on.
Take care,
Rich
Green Bay

Got them, they look great! Thank you.

Chris


And there is interest in more, so maybe there will come another run 

[opt2not]

Got mine last week. It looks great!
Thanks for doing this Etienne!

Now to get my hands on an old type-writer. 

[Etienne MacGyver]

I have packed everything, and the results are in (leftoverwise speaking)

I have left over 4x #11 and 4 sets of Jamma pinout edgeconnector stickers:



Thats it, the rest is all packed and almost all are payed and send.

Thanks to everyone involved to make this to a big succes !

[Etienne MacGyver]

There is some interest from KLOV members for more, so i can start to collect again untill i got a full sheet

these are 100x70 cm and will carry aprox. 75 stickers...

let me know if you want some more, or if you missed this run and you want some now, or if there is anything not here that you want, i can vector it and put it in the sheet.

[Superully]

once they get "the superully approval" on saturday, i will order more

[Etienne MacGyver]

As you might have read in this topic:

https://www.dragonslairfans.com/smfor/index.php?topic=2454.0

it was a huge succes, bigger than i expected.

I have decided to take new orders for another run.
I have to collect a full sheet to justify the costs.

you can understand that 1 sticker would be way too expensive, so the more "orders" the better i would say.

I cannot give a time of printing since i dont know when the sheet is full.
Anyway, the sheet measurement is 100 x 70 cm. and calculating roughly there fit 70 - 75 etikets in one sheet (depending on the size ofcourse)

once the sheet is full, i can let it print, or if there is more than one sheet, even better which reduces the costs.

Based on the last run, the costs per etiket is  € 2,20 and depending on the quantity the shipping may vary.

Again, like the first run, the idea is not to profit from it.

i will display the pics of the etikets that are here in the next post, and if there is anything that is not there which you like, i can create that if there is a good picture / scan available with measurements in millimeters. (yeah yeah i know you guys like inches but i am european hey  )

also in the next post i will keep track of the received orders.

[Etienne MacGyver]

I have finished up the first run, and decided to collect for another run because it was abig succes !

Thanks for all involved ! 

once they get "the superully approval" on saturday, i will order more

You can !

right here 

https://www.dragonslairfans.com/smfor/index.php?topic=3134.0

[Etienne MacGyver]

Orders received and placed in sheet:

Total: 37 out of 70

Krajkerjac: 3x #4, 3x #5, 1x #9, 3x #11, 3x #11a 3x #12 (#11a is included with #11) totals: 13
Toolguy: 1x #10
kspiff: 2x #4, 7x #11, 2x #12, 6x #5 (#11a is included with #11) totals: 17
ballytablewiz: 1x #4, 1x #5, 1x #11/11a, 1x #12 (#11a is included with #11) totals: 4
gatordad: 1x #4, 1x #12 totals: 2

**********************************************************************

1: Zaccaria - Ready for Printing.


2: Irish Atari - Ready for Printing.


3: Irish Atari Alternative - Ready for Printing.


4: Usa Atari - Ready for Printing.


5: Usa Atari Alternative - Ready for Printing.


6: Sega Hangon - Ready for Printing.


6a: Sega Hangon FCC ID - Ready for Printing.


7: Zippy Race - Ready for Printing.


8: Atari-Namco - Waiting measurements.


9: Dragons Lair - Ready for Printing.


10: Namco-bally - Ready for Printing.


11: USA Atari inverted - Ready for Printing.


11a: Matching serial sticker for sticker 11 - Ready for Printing.


12: USA Atari FCC - Ready for Printing.


13: Atari Cabaret IRELAND - Ready for Printing.


14: Atari Cabaret USA - Ready for Printing.

[eurotronic]

Hey hey! 
I just received the jamma decals.
Thanks bro!
You are a real

[Etienne MacGyver]

I am happy you like your own design   

[Superully]

what happened to this one, etienne?

i have another one for "the vector que", etienne!



doesn't look like it, but it is indeed an alu sticker found on the back of sega / gremlin cabs. is the photo good enough? of course those hand-written numbers for the european cabs would have to be inserted at the right spot. i stilll have to get the measures ...

note to self:
10.2 x 5.1 cm
 

[level42]

That one is too good to replace.

[Etienne MacGyver]

what happened to this one, etienne?

Have not created it yet, but i will 

not now though, i was too busy fixing a neck from someone's f@cked up monitor.... 

Also the Qbert sticker i still need to make, but there is no hurry, the printing is not yet planned, although some serious numbers are comming from klov though..

Anyway, i will not forget that 

[Superully]

That one is too good to replace.

agreed! but i have two more cabs without it

not now though, i was too busy fixing a neck from someone's f@cked up monitor.... 

a f@cked up monitor? who does stuff like that?