yes not easy to find one as I said at the beginning of this thread.
On Saturday with my friend Atarimania, It took 3 hours.
![](https://image.noelshack.com/fichiers/2018/11/1/1520852681-img-1464.jpg)
![](https://image.noelshack.com/fichiers/2018/11/1/1520852681-img-1466.jpg)
![](https://image.noelshack.com/fichiers/2018/11/1/1520853023-img-1468.jpg)
It is not perfect, difficult to perfectly center the side, but the result is great I think, I am not able to say how many hours i spend on this machine, but i am sure a lot.
![](https://image.noelshack.com/fichiers/2018/11/1/1520852681-img-1469.jpg)
![](https://image.noelshack.com/fichiers/2018/11/1/1520852681-img-1471.jpg)
![](https://image.noelshack.com/fichiers/2018/11/1/1520852681-img-1472.jpg)
After installing the t-molding
![](https://image.noelshack.com/fichiers/2018/11/1/1520852693-img-1484.jpg)
So I can really say : I save it !!
![Space Ace :spaceace:](http://www.dragonslairfans.com/smfor/Smileys/default/spaceaceicon.jpg)
Time now to install everything else on the cockpit, monitor, PCb's etc.
Before I check the pictures I made in 2010 to install the monitor, and do the same, but it is not correct so i must flip it.
![](https://image.noelshack.com/fichiers/2018/11/1/1520852681-img-1478.jpg)
![](https://image.noelshack.com/fichiers/2018/11/1/1520852693-img-1479.jpg)
![](https://image.noelshack.com/fichiers/2018/11/1/1520852693-img-1480.jpg)
![](https://image.noelshack.com/fichiers/2018/11/1/1520852693-img-1481.jpg)
When I power on the first time i only have one basic dot on the center of the monitor, the PCB's game weren't powered properly.
![](https://image.noelshack.com/fichiers/2018/11/1/1520852693-img-1482.jpg)
After checking all voltage and little work on the power brick I finally have the PCB's game running.
![](https://image.noelshack.com/fichiers/2018/11/1/1520852693-img-1507.jpg)
Here is the status of the voltage on the J5 connector, game PCB's not plugged but everything else yes
I have this
Red lead to pins 1, 2, 3
Black lead to pins 4, 5
17 vdc unregulated so it is ok
Red lead to pin 6
42 v instead 36 a little high but it is without plug the pcb boards
Red lead to pin 8
Black lead to pin 9
I have 15 v instead of 6.3 vac
Red lead to pin 10
Black lead to Pin 14
5.15 v instead of 80vac I have no pin in 14 position.
Red lead to pin 11
Black lead to pin 13
28 v instead of 65vac
No sound, for that I test 2 years ago my PCB's on an upright cabinet, all seems working but without sound so it is not a surprise, this time I have the demo scene I think on a vertical line.
![](https://image.noelshack.com/fichiers/2018/11/1/1520852693-img-1504.jpg)