Hi guys!
Last weekend I finally started working on my Mario Bros widebody from Thomas' first container
The problem, the Sanyo EZ20 monitor doesn't come on. When I power the cab on, marquee light works, coin door lights work, I hear the psu humming like it should.
But the monitor doesn't power on, not even the slightest hum or buzz. No glow from the neck, no sparks or arcing around the flyback.
No sound from the Mario Bros board too. But since the monitor isn't doing anything, the sound board on the monitor probably does not get power to work.
I tried the another Sanyo monitor from my DK cabinet, game does work! Though I can't hear any sound, could be a fault on the Mario Bros board or the audio board on the DK monitor.
But at least, the psu, cabinet wiring and game board seems to be pretty OK.
so the problem must be in the Mario monitor.
As you can see on the photo, the flyback had some goo leaked. Could that be the problem? Both fuses on the chassis checked out fine btw.
I know they sell replacement flybacks for the Sanyo EZ20, but before ordering from the US I would like to hear your expert opinion
Thank you for reading!
-Barry
EDIT: I just noticed I already unplugged the video cable going to the "invert/ non-invert board" prior to taking the photo's.
I did test it when the input was hooked up correctly guys