Author Topic: [Vectorizing] Pleiads IreCsa metal plate logo (Read 8057 times)

DarthNuno · « **on:** April 04, 2012, 07:53:59 PM »

Requested by Ully! Sounds like a new vector logo request?

Superully · « **Reply #1 on:** April 04, 2012, 08:31:47 PM »

Quote from: DarthNuno on April 04, 2012, 07:53:59 PM

Requested by Ully! Sounds like a new vector logo request?

definitely

!

thx so much for the pic, bruno, but unfortunately i'd also need the text at the bottom of the plaque (and if possible a shot of the entire thing to get the spacing right). may i kindly ask you to get out your camera again?

DarthNuno · « **Reply #2 on:** April 04, 2012, 08:32:48 PM »

No problemo! Will do it tomorrow

DarthNuno · « **Reply #3 on:** April 06, 2012, 06:10:44 PM »

Here's an other shoot.
Hey, I didn't noticed so far the 'C' of ireCsa

Superully · « **Reply #4 on:** April 06, 2012, 06:16:08 PM »

wonderful bruno, thx so much, i know you're extremely busy, but you found the time nevertheless!!!

ETIENNE?

Etienne MacGyver · « **Reply #5 on:** April 06, 2012, 08:02:57 PM »

Yes sir ?

scr33n · « **Reply #6 on:** April 06, 2012, 08:11:53 PM »

Wooowww Etienne - faster than the speed of light !!!

Etienne MacGyver · « **Reply #7 on:** December 14, 2012, 02:24:36 PM »

And done

I adjusted the "gold" in the file i received, but i guess that its best printed on a brass plate and keep that part transparant...

anunaki · « **Reply #8 on:** December 14, 2012, 02:27:31 PM »

How do you do this Etienne? With Illustrator??

This kind of stuff is amazing, is this printed on metal also?

Belike · « **Reply #9 on:** December 14, 2012, 02:35:53 PM »

Looks very nice if you ask me.

Etienne MacGyver · « **Reply #10 on:** December 14, 2012, 03:04:26 PM »

Quote from: anunaki on December 14, 2012, 02:27:31 PM

How do you do this Etienne? With Illustrator??

This kind of stuff is amazing, is this printed on metal also?

Yep , Illustrator it is.

This is not printed yet, i only adjusted the file that i have received from the midway coindoor
there was no Irecsa label on there, so i added / adjusted the missing parts

subzero1970 · « **Reply #11 on:** January 10, 2013, 07:52:11 PM »

cmon etienne - HOW DID YOU DO THAT??!!

i have illustrator but have no idea where to start

Etienne MacGyver · « **Reply #12 on:** January 10, 2013, 07:58:29 PM »

I think you interpreted my explanation wrong, i mean by

Quote

i only adjusted the file that i have received from the midway coindoor

that i have adjusted the Vector file i received from Rich..

this is not an adjustment from a raster file, the raster file is just there as a refference....

The basics you can learn with some video's i have on my FTP
Download that, and you will understand the basics..

PM send

by the way, start always by searching here :
http://vectorlib.free.fr/

there may be the vector file you need already.

Another tip; download a piece of artwork at the vectorlib, open that in illustrator and experiment with the shapes and layers that are already there.
that way you will get a hang of how it works

News: