Hi,
I got myself a MK1 boardset that I want to put in my MK2 cab. The only thing is I only got the boards without the cables.
With cables it looks like this:
I know I need a 20 pin ribbon cable with connectors and I know where to buy them.
But I also need a couple of molex cables and a 50k Ohm potmeter:
Connector J2 (CPU Board) to Connectors P6 and P7 (Sound Board)
Use Molex 8 Pin 0.156" Header for Connector J2
Use Molex 6 Pin 0.156" Header for Connector P6
Use Molex 4 Pin 0.156" Header for Connector P7
Connector J2 (CPU Board)
|----|-------------|
| 1 | Speaker (+) |
| 2 | Speaker (-) |
| 3 | +12VDC |
| 4 | +12VDC |
| 5 | Key |
| 6 | N/C |
| 7 | Ground |
| 8 | +5VDC |
|------------------|
Connector P6 (Sound Board)
|----|--------|
| 1 | +5VDC |
| 2 | Ground |
| 3 | N/C |
| 4 | Key |
| 5 | +12VDC |
| 6 | +12VDC |
|-------------|
Connector P7 (Sound Board)
|----|-------------|
| 1 | Speaker (-) |
| 2 | N/C |
| 3 | N/C |
| 4 | Speaker (+) |
|------------------|
Connector J3 (CPU Board - Power to Coin Meter)
Use Molex 4 Pin 0.100" Header
|----|-------|
| 1 | N/C |
| 2 | N/C |
| 3 | +5VDC |
| 4 | N/C |
|------------|
Connector J4 (CPU Board - Extra Buttons on Control Panel)
Use Molex 12 Pin 0.100" Header
|----|--------------|
| 1 | N/C |
| 2 | N/C |
| 3 | N/C |
| 4 | 2P Low Punch |
| 5 | N/C |
| 6 | Key |
| 7 | 2P Low Kick |
| 8 | N/C |
| 9 | 1P Low Punch |
| 10 | 1P Low Kick |
| 11 | N/C |
| 12 | N/C |
|-------------------|
Connector P5 (Sound Board - Volume Control Pot)
Use Molex 4 Pin 0.156" Header
|----|-------|
| 1 | N/C |
| 2 | Input |
| 3 | Key |
| 4 | Wiper |
|------------|
I looked around all kind of internet shops, but I can't figure out which cables/ connectors I need.
I hope you guys can help me with this. What is the name of these cables/ connectors, there seem to be tons of different molex cables/ connectors.
Greetz, Patrick
