Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - glstar

Pages: 1 [2] 3 4 ... 11
16
Arcade Lifestyle / Some Christmas gifts........Original US....
« on: January 28, 2017, 11:37:57 AM »
Arrived around one months later, but those two are some nice Christmas gift....
Just wonderful
First one packed....




Unpacked.....



Really a beauty........




Inside there is the game in cage, the original Nintendo monitor and all the original 110V cablage...


Thank you very much Bruno........
Love it.....

Second one, packed......




Unpacked.....wonderful machine.....




Didn't have the time to open it too, but it's all ok for sure....
:)
Thank you very much Robert....
Love it too....

Shame but i didn't have a 100V transformer, so the powerup of both machines is delayed unitl next week.... :(

17
Arcade Lifestyle / Re: Pinges Playchoice-10 cabinet and games.
« on: January 24, 2017, 08:41:54 PM »
Just a wonderful cab.
It would be great near a Sega Megatech.....
:)

18
Arcade Lifestyle / Re: Rolling Thunder Atari Ireland
« on: January 19, 2017, 05:58:41 PM »
Quote from: Superully on January 19, 2017, 05:56:02 PM
great! and you wanted to have it up and running so badly, you didn't even take it off the pallet  8)
;D
I'll do this shortly.
 :lol:  :lol:

19
Arcade Lifestyle / Re: Rolling Thunder Atari Ireland
« on: January 19, 2017, 05:14:10 PM »
Great to have it running again.
Now i want to fix wirings and aestethical conditions.....
I just see that seems to be only US control panel overlay.
Anyone knows where i could get a repro CPO for the Euro version of this cabinet?

20
Arcade Lifestyle / Re: Rolling Thunder Atari Ireland
« on: January 18, 2017, 07:52:23 PM »
It's back to life...
And cables have been touched....
I use a mate'n'loc 6 pin connector...and now...








21
Arcade Lifestyle / Re: Rolling Thunder Atari Ireland
« on: January 14, 2017, 03:46:47 PM »
Quote from: rogerxy on January 14, 2017, 03:37:17 PM
Great pickup, Chris is great dealing with :)

As Pinge says I'm in Australia, will be home next week the 18th. If you still have questions then I will be happy to help you  :pac:
Yes very true.
Thanks for the help.
I should have solved it.
1-2-3 should be GND
4-5 should be +5V
6 should be +12V
Info from a nice guy here in Italy, confirmed from an old post from the great KenLayton.
I'm really excited now....
I want to put my hands on the cab now...
:)

22
Arcade Lifestyle / Re: Pinges Basement
« on: January 14, 2017, 12:47:18 PM »
Great work there.
And seem to be a really nice place to have some nights of entertainment....
 :D

23
Arcade Lifestyle / Re: Rolling Thunder Atari Ireland
« on: January 14, 2017, 12:42:15 PM »
Quote from: Pinge on January 14, 2017, 12:38:32 PM
Only one small hickup, he is in Sidney at the moment, think ge will be back home next week, and I bet you have it all figured out by then :D

Well maybe i can look at this early next week.....
So don't know if i figure first then he return.
 ;D ;D ;D

24
Arcade Lifestyle / Re: Rolling Thunder Atari Ireland
« on: January 14, 2017, 12:30:41 PM »
Quote from: old school on January 14, 2017, 12:16:55 PM
Nice catch

looking for one too

 ;)
Good luck for your search.
I hope you will find one.
This game is wonderful.

Quote from: Pinge on January 14, 2017, 12:24:44 PM
Awesome pickup!

Rogerxy got one last year, think he is finished with recapping/rebuilding the elctronics and might be able to answer questions...
Oh thanks.
Would be great if he can clear that for me.
Strange that this is not on the user manual....
:(

25
Arcade Lifestyle / Rolling Thunder Atari Ireland
« on: January 14, 2017, 10:06:26 AM »
Finally after some years of research (and for my fault, i miss two cabs in the past)....
Thank you very much Chris.
Love this cab....


After some minutes of unpacking...



Very good conditions and all original.

It's power supply don't work.
I'll try to have it repaired so the cab will stay original.

In the meantime i only have to understand which is the order of the power going into this Atari interface that goes then inside the jamma of the board.
Don't know if it follow the jamma standard pinout too.







I don't think it's a big problem, anyway if someone could tell me which is the order of the wires i appreciate.
:)

Edit.....
It's back to life...
And cables have been touched....
I use a mate'n'loc 6 pin connector...and now...








26
'Business' Area : Buy/Sell/Trade / Re: [FS] 20" 15KHZ A48 CRT Monitors BRAND NEW IN BOX
« on: January 12, 2017, 05:28:42 PM »
Quote from: anunaki on January 12, 2017, 05:19:48 PM
Andre got ones of these right?
Those monitors were in two version.
One was an A51 semi-flat tube and this one that is more difficult to find, that is an A48 curved tube.
This is a direct replacement in Sega cab for example.
I also use one of them in a Time Scanner cab, in a Powerdrift upright cab, and my friend in his Super Hang On upright.
The A51 instead is not a direct replacement, but if you have space inside the cabinet is not a problem.
Since i also own some of the A51 version, i manage to fit them in some 20" jamma generic cabs.
Both are great looking monitors (as they are new), but for sure the curved A48 models are way better for old 20" dedicated cabs.

27
'Business' Area : Buy/Sell/Trade / Re: [FS] 20" A48 CRT Monitors BRAND NEW IN BOX
« on: January 12, 2017, 04:48:59 PM »
Quote from: Laszo on January 12, 2017, 04:46:49 PM
Where are they located and what specs do they have. Type number is hard to read.
They are standard 15 khz monitors.
They are in Italy.

28
'Business' Area : Buy/Sell/Trade / [FS] 20" 15KHZ A48 CRT Monitors BRAND NEW IN BOX
« on: January 12, 2017, 04:20:50 PM »
Hi.
I just hear a friend of mine that got a pair of 20" monitor brand new in box left.
He asked me if i can help him to sale them.

Those are real 20" 15KHZ curved monitors and infact he used one of this in a super hang on upright and it fit perfectly.










He wants 300€ each one for them plus shipment.
Let me know if someone needs them.

29
'Business' Area : Buy/Sell/Trade / [WTB] Nintendo Popeye Upright Cabinet
« on: December 14, 2016, 03:49:35 PM »
Hi.
I'm looking for a Popeye Upright Cabinet.
I remember this game when i was around 8-10 years old...and it's one of my masterpiece.
I miss one some weeks ago :( .....
Please let me know if you have one for sale.
:)

30
'Business' Area : Buy/Sell/Trade / Re: WTB: Rolling Thunder Atari Cabinet
« on: December 01, 2016, 12:03:59 PM »
Quote from: Q*ris on December 01, 2016, 12:00:32 PM
I'm planning on selling mine.
I'm located in Belgium.
I will send you pictures and more infos this weekend if you're interested.

Yes, please.
I'll send you my mail in PM.

Pages: 1 [2] 3 4 ... 11