Dragon's Lair Fans - Arcade Lifestyle
January 24, 2022, 05:25:01 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: ALS'/DLF' : your daily dose of Arcade Life Style...inside the Dragon's Lair!
 
  Home Help Search Calendar Gallery Login Register  
  Show Posts
Pages: [1] 2
1  General Chat / All the rest / Re: Hello! New here. Restoring an afterburner cockpit in ohio on: January 07, 2014, 01:24:54 AM
There are a few of us doing this.  I am in NY.  Still dealing with motion issues on mine.
2  General Chat / Arcade Lifestyle / Re: After burner dlx (pic heavy) on: January 29, 2013, 12:51:49 AM
I have the actual snubbers that are the part.  I changed all of them on both boards.  As for drive board I plugged a new one in and it still is not working for motion.  Still have an occasional issue with the main breaker tripping on start up.  My motion only want side to side initially never forward and back.  When I replaced that motor I started having more problems.  I am also going to check on the DC/ DC converter board and also some of the small parts that are goingmtowardmthe transformers.  I also heard the ssr board may have some things to do with it.  I think I can get both of those.  That would make it so I have a new drive board, ssr board and DC/DC converter board.  That would mean all newborns except the triac.  I will let you know about them.. Still in similar,situation as before.
3  General Chat / Arcade Lifestyle / Re: After burner dlx (pic heavy) on: January 26, 2013, 01:51:52 AM
I have drive boards in my hand.  I am going to try one of them this weekend.  If younguysnare interested in one then let me know.  We can figure out a price and shipping.  Just pm me and we will figure it out.

Thanks
Mike
4  General Chat / Arcade Lifestyle / Re: After burner dlx (pic heavy) on: January 23, 2013, 07:11:40 PM
Well I may have some relief.  I just ordered some of the driver boards we want.  Not the triac boards.  I found some and I am order like 4 of them.  I should be able to set you guys up with one, just not sure what shipping will cost.  I know they are not really available.  I found the companynthatbis set over here and they had some left.  I bought them.  Will let you know when I get them and will test out the drive board theory.  Like we said I do not think it is the triac board.  I will just keep working my way through each board I guess.
5  General Chat / Arcade Lifestyle / Re: After burner dlx (pic heavy) on: January 21, 2013, 10:57:32 PM
The drive board is on page 61 of the manual.  It is number 12 in the picture and the actual part number is 839-0086. Imam in the process of replacing mine.  I am trying to get one.  May try for a few extras if they are not too high on price.  I know you are looking for one and so is poldercade.  I will let you guys know.
6  General Chat / Arcade Lifestyle / Re: After burner dlx (pic heavy) on: January 19, 2013, 10:22:26 PM
Another update on mine.  I rebuild both of my triac boards and plugged it in.  I have both motors out but plugged in to test.  As soon as I turn it on it tries to test the motors and trips the breaker (main).  If I unhook  the board it will start up.  Then I hook it back up and go into diagnostic.  I tested all my motors and will only work on my left right connection on the back connection for forward and back I do not get anything from the motors.  Obviously the motors are good.  When I checked my triac board again everything still tested good.  I have not tried the other board yet.  Any ideas why it would trip on motor warm up but not when running in diagnostics?  Also any ideas why I am getting nothing from my forward/ back connection.  I checked my wiring to the triac board from the motor and everything looks good.  I am stuck!!
7  General Chat / Arcade Lifestyle / Re: After burner dlx (pic heavy) on: January 14, 2013, 01:18:21 AM
You didn't happen to get any triac boards with the other boards by chance??

 Grin
8  General Chat / Arcade Lifestyle / Re: After burner dlx (pic heavy) on: January 13, 2013, 07:14:46 PM
Any chance you want to part with one of those working boards?  I would like one for a back up.

Thanks
9  General Chat / Arcade Lifestyle / Re: After burner dlx (pic heavy) on: January 12, 2013, 12:11:15 AM
Probably about 2 - 3 dollars each plus shipping.  Depends on how many you want.  Let me know.
10  General Chat / Arcade Lifestyle / Re: After burner dlx (pic heavy) on: January 11, 2013, 02:27:42 AM
I am going to get into those boards in the next few weeks.  Need to figure out what I can clean them with.  I did get a good soldering station so that the temperature is right for soldering.  By the way if you need any of the black snubbers/ film capacitors for the triac board I have the actual Panasonic part.  I had to order 100 of them and I only need 8 for the two boards.  In think I have a few extra!!!!  I will see how it works.  Just don't want to blow anymore triacs if it is something else.  Will keep you updated.
11  General Chat / Arcade Lifestyle / Re: After burner dlx (pic heavy) on: December 20, 2012, 09:26:27 PM
I am going to try and clean up the boards and see what I can do to solder them.  Will let you know when that happens.  I feel your pain!!,
12  General Chat / Arcade Lifestyle / Re: After burner dlx (pic heavy) on: December 20, 2012, 03:24:18 AM
Here is the other!
13  General Chat / Arcade Lifestyle / Re: After burner dlx (pic heavy) on: December 20, 2012, 03:23:22 AM
Here are some pics for my triac boards.  It looks as though there has been a little work done on these also.  I also ordered the correct snubbers for the board.  I had to order 100 of them.
14  General Chat / Arcade Lifestyle / Re: After burner dlx (pic heavy) on: November 25, 2012, 02:17:38 AM
I will try to take a picture of both of mine and post it.  Still working on those snubbers.  I can find the exact part but I need to order 100 of them.  May just do it and get the right ones!!  Will let you know when I do and get it done. 
15  General Chat / Arcade Lifestyle / Re: After burner dlx (pic heavy) on: November 16, 2012, 02:43:23 AM
Can you tell me what snubbers or resistors you bought and if they end up working?  That's what I'm trying to find for mine.

Pages: [1] 2
Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!