Very nice build Etienne. I envy you guys with so much knowledge and two right hands. 

Yes the racers are very nice indeed, need a lot of space and are difficult to move.

Had a lot of problems to move the rad mobile deluxe i bought, damaging my car a little bit 
How do you guys move such big cabs (twincabs and cockpits). Can they be disassembled in two pieces and with how many people?

Bought another one cheap which had the power cable and is a v2 or so (how many version are there? I know these two and an accessoire that you can click on top of the demopod for the eyetoy. For the first one there is an iron frame gameholder, which isn't needed anymore for v2 because it has one build in)

     


Seach the difference



Seller told me the tv (Sony KV=21FX30B), which is a higher model than the first demopod (Sony KV-21FX20B),
misfunctioned. Only the color green is shown.



But luckily it was the ps2 av/scart cable. Had another good one lying around, so used that one.

Here are some pictures of the powercable i was searching and was the reason to start this toppic.

     

     




And here is a picture of the instruction leaflet, which isn't a loose paper but a sticker on the left side of the box.



This conclude this toppic. Thanks to all 

Very cool machine. I'm not an expert on this machine, but I will give it a shot. The movement knows three parts. 1 the engine part that makes the actual movement,2  the hardware and software on the motherboard, 3 sensors that decide how the movement should go. The last part I' m not sure about it could be that every move is just software based and not influenced by sensors.

BUT, at startup the testmovement works. So part 1 and 2 are working. That leaves three options, a specificpart of the software is corrupt ( highly unlikely), the movement option has been turned of in the setup, ( check setup and manual), last option most likely... Sensors or sensor wiring is dirty or broken.

Find the sensors by checking out the manual or just following wires, ccheck in the test mode of the software if there is a sensor, button test mode.

Good luck

Thanks Laszo, will check them when i have put the cab together again. At the seller's home we have looked at the sensors already because the signal disappeared sometimes when touching it.

He was willing to sell both cabs for €125,- in total, so i definitely didn't complain about the price.  

sold them both to me for 90 euro. A bargain it seems  

Gauntlet: http://link.marktplaats.nl/563828954

Crazy kong & PP2: http://verkopers.marktplaats.nl/6005170

All mine now   

 A picture of the cab found on internet


Googled for more info on this cab, but it wasn't very succesfull. So a direct question, maybe someone on this forum has this cab also and more knowledge of it.

The cab moves when initialising but when playing it doesn't. What could cause this? Motor is good else it wouldn't move at all. During a game it moves very slowly bit by bit to the left and stay there. Have to shutdown and start again to get it back in the start position.

Here is a movie i found on youtube of the cab in action

http://www.youtube.com/watch?v=N78efnYxhMQ

Here is another one which demonstrate that it must move even in demo mode

http://www.youtube.com/watch?v=YHtZLkxWFmg

I'm missing the coinbox by the way  
The seller hadn't room for it when he bought it, and because it wasn't working he had thrown it away.