Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Mickey_Moose

Pages: 1 ... 3 4 [5]
61
Dragon's Lair / Space Ace / Re: Help with Dragon's Lair control panel?
« on: April 15, 2011, 04:31:45 PM »
Ops, can't help. I remember you own a Cinematronic model. I only have Euro models here  :-\
Hope someone else here may help you.

Sorry - probably should have specified, however I did get an answer on DLP. Thanks for offering. :)

62
Dragon's Lair / Space Ace / Help with Dragon's Lair control panel?
« on: April 11, 2011, 01:29:59 AM »
Ok, in the process of restoring my cabinet I have noticed that the control panel has been bent somwhat so that when you are looking at the end it kind of has a bit of a twist to it.

I was wondering if someone was able to measure their panel for the correct angles so I can return mine back to it's proper shape.

From the bottom 'hinge' point, the first bend looks like it should be a 90° bend as both side on mine are the same, the next 2 bends seem to be where the problem is.

Left side I am getting : 108° and then 155°
Right side: 106° and then 154°

Angles are mesaured from the one closet to the operator, before the joystick and then the one after the joystick travelling away from the operator.

ANY help is greatly appreciated.

Thanks.

63
Artwork / Re: Alu sticker repro run
« on: March 23, 2011, 02:58:24 PM »
PM sent with link to my hi-res scan of my Dragon's Lair SN label - my original is showing it's age badly and like to order 2 replacements using the same info that is in the scan (Model: LD and SN: 05498).  ;D

Just a note that it is black on silver, the scan makes it not too too black.  :P

Thank you for doing this.

Cheers,

ps >> here is the link (just in case) - contains either a tiff or pdf file: http://members.shaw.ca/junkuser1988/DLSerial/

64
Dragon's Lair / Space Ace / Re: Newbie DL cabinet questions...
« on: March 22, 2011, 02:09:26 AM »
hi
i also have a Cinematronic version and mine was uncomplete like yours, i can post pictures of everything in order to restore the game like in 83.
I also have some spare parts for you

Hi - PM sent

65
'Business' Area : Buy/Sell/Trade / Re: WTB: Dragon's Lair parts
« on: March 21, 2011, 01:52:40 PM »
hi
i have spare parts for sell and i am located in France.
I have some original marquee rails (x4)
Original working pcb with metal plate and some more stuff
let me know if you are still interested

https://www.dragonslairfans.com/smfor/index.php?topic=2191.msg25771#msg25771

Hi,

Could I get back to a bit later - working on a few right now. Thanks for the offers.

66
Dragon's Lair / Space Ace / Re: Newbie DL cabinet questions...
« on: March 19, 2011, 05:36:06 PM »
Welcome to the Dragon's Lair cabinet owners club  ;)

First of all, what it your cabinet model? Atari (euro) or Cinematronic (us) one?

Opps, sorry - it is the Cinematronic one (sn: 5498).

Cheers,

edit ...

Just wanted to add I think I have most of it figured out - turns out I did have an overall cabinet diagram in my manual, just in table form (I was looking for an actual picture diagram) - so should be good there.  :oops:

Still interested in a picture of the power supply area if anyone can grab one for me.

Thanks

67
Dragon's Lair / Space Ace / Newbie DL cabinet questions...
« on: March 19, 2011, 03:59:15 PM »
Hi,

Ok, finally found a Dragon`s Lair cabinet within a reasonable distance to me, but I am greatly new at this and completely clueless. ???

Now the cabinet has been modified to run Jamma games, but I would like to restore it back to it`s former glory and have a ton of (maybe stupid) questions, so I guess I will start now.

- I have the Wells-Gardner monitor and I know I need a NTSC decoder card - what I would like is a picture of the card and the external controls to see how these are mounted (and location).

- I have read that the audio (and it is common sense) coming of the LD player needs an audio amp - is this a separate unit, or is it par of the main logic board (or some other board) - that is to say do I need to find an audio amp and where is it mounted in the cabinet (pictures)

- actually I really could use specific pictures of the power supply side, rear side and logic board sides of the cabinet.

- does an actual overall wiring diagram for the cabinet exist? I was thinking of building my own harness (unless someone has one for sale) - but it would be nice if there was some sort of over all diagram that shows how the major components connect to each other (ie: coin counter, volume controls). The worest part is that I am starting from square 1 when it comes to the wiring since the harness was changed.  :'(

- and one last question for now, I have been unable to verify from various pictures on the net, but on the control panell, is the upper end held in place with bolts through the sides of the cabinet? I know that the lower `pivots`are, but can`t really tell if the upper part is (currently that is the way mine is and pictures I have seen seem to show differently.

Thank you for any help and your patience...  :)

68
'Business' Area : Buy/Sell/Trade / Re: WTB: Dragon's Lair parts
« on: March 18, 2011, 07:06:06 PM »
If you are based in Canada/USA also post on www.d-l-p.com

Oliver

Thanks

69
'Business' Area : Buy/Sell/Trade / WTB: Dragon's Lair parts
« on: March 17, 2011, 10:57:56 PM »
Newbie looking for some stuff to help complete first cabinet restoration.

List of what I am currently looking for (I am sure more to come):

Marquee - pending
Marquee rails - pending
Scoreboard plexi
Wico joystick (NOS please)
Wiring harness - although I may just end up making my own, but if you have one available for cheap.  - pending
main board (with ROMs would be nice - right now to particular on version)  - pending

Thanks for any help you can provide...


editted for content.

Pages: 1 ... 3 4 [5]