Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Mickey_Moose

Pages: [1] 2 3 ... 5
2
Dragon's Lair / Space Ace / LD cable
« on: November 19, 2022, 11:08:23 PM »
Does anyone know the part number for the D connector for the ribbon cable (actually if you have part number for the connector at the board that would be great).

A cabinet came into my possession and this cable is missing. :(

3
Artwork / Re: Euro Dig Dug CPO
« on: January 25, 2018, 02:51:47 PM »
Cool - thank you for the link. :)

edit - ouch, going to cost me some good coin to get it here to Canada. :(

4
Artwork / Euro Dig Dug CPO
« on: January 21, 2018, 10:19:03 PM »
Hi,

Looking for an overlay or even if someone has the artwork scanned/vectored/etc.

Can anyone point me in a direction? Everything I have seen so far is the US version. :(

Thanks

5
Artwork / Re: Dragon's Lair CPO Artwork
« on: August 13, 2015, 08:53:50 PM »
US-DL ;)

6
Dragon's Lair / Space Ace / Re: Dragon's Lair t-molding
« on: May 26, 2015, 08:24:39 PM »
My US model had the leather effect.

8
Arcade Lifestyle / Re: This Old Game products
« on: March 04, 2015, 07:22:25 PM »
Everything I have bought from them has been top notch and would recommend them personally. ;)

9
Artwork / Re: Robotron sidearts corrected
« on: March 03, 2015, 03:01:00 PM »
Thanks for the share should I get another cabinet. ;)

10
Artwork / Re: Paint codes Robotron
« on: March 03, 2015, 02:59:05 PM »
Sorry for my late reply, but here is what I used for my Robotron cabinet.

for the silver (sprayed on using a HVLP spray gun):


and the blue and red:


best picture I have of the cabinet ATM (I know, sorry made it a JROK multi-William, but it had none of the OEM hardware (got it as a Block Out) and hard to find the OEM board around where I live without pay excessive shipping costs from the US):

Edit: the blue looks weak in the picture, but it is like the cap color in the can pictured above. The colors were probably a close match to the red/blue in the marquee/bezel though looking at my pictures.



I can say that it looked awesome when the sun hit the paint with the metal flake that was in the silver and the red and blue really popped. How close there are to OEM I don't know, but it looked really good to me (and I am anal about such things). I was too cheap to buy the automotive paints CAN$100+ per can.

Note: if you like, I can find some card stock and spray the colors onto it and mail you a copy if you like so you can color match. Not sure how well it will work, but it is something I can do to help. ;) PM with your address.

11
Artwork / Re: Paint codes Robotron
« on: February 27, 2015, 12:20:01 AM »
This thread over on KLOV has the automotive color codes (and year and make/model of cars). This may be of use?

http://forums.arcade-museum.com/showthread.php?t=275918&highlight=beware+robotron+paint&page=3

I don't have my Robotron anymore to compare the colors I used to the marquee, but I still probably have the rattle cans that I used. I believe they were a Rust-Oleum product, not sure if you have that brand there.

12
Artwork / Re: Dragon's Lair CPO Artwork
« on: February 27, 2015, 12:08:34 AM »
...well so much for sharing the scans, have not received a cleaned copy back in return despite a few downloads (and a reminder PM to some).   :o ???

...oh well...I guess it is to be expected, people get what they want and then disappear...  :'(

F..k Mickonos or whoever you are ... here is my work available for downloading :wink:
https://www.dropbox.com/s/50qh210i1hgi6td/DLCPO.rar?dl=0


Thank you for sharing it back - I don't know what the hell is wrong with people when they "agree" to something, but can't be man (or big) enough to keep their end of the bargain/agreement. I know my scan wasn't exactly perfect and needed work which I was upfront about, but once some got their grubby hands on it, it was too bad so sad... :(

At least there are still some good people (mostly) left on this planet.  ;D

Thanks again.  ;)

13
Artwork / Re: Dragon's Lair CPO Artwork
« on: January 24, 2015, 04:52:38 PM »
...well I did have someone contact me via PM about wanting the scans too (1 of many).

The English used and how he said he could print me up a copy on the same material as the original made me think of mikonos right away (based on other posts and promises he made). I figured he probably did dl it it if he lurks here since I made the download link public.

Just expected others to follow up...  :'(

14
Artwork / Re: Dragon's Lair CPO Artwork
« on: January 23, 2015, 02:59:28 PM »
...well so much for sharing the scans, have not received a cleaned copy back in return despite a few downloads (and a reminder PM to some).   :o ???

...oh well...I guess it is to be expected, people get what they want and then disappear...  :'(

15
Interested here (depending on price of course). ;)

Also suggest you post this over on KLOV as well (if you have not done so yet)

Pages: [1] 2 3 ... 5