Dragon's Lair Fans - Arcade Lifestyle
General Chat => Artwork => Topic started by: Digimon on March 09, 2018, 03:43:35 PM
-
hi guys,
do you know if there are scanned or vectorized Artwork files around?
regards
Digi
-
i dont have any, i only have the technical manual
-
A bended marquee and a damaged cpo is on the way to my house, my friend wants to make a repro from them, but it takes some time.
I will ask him, to give us the files, once they will be ready.
-
Full size upright or the flat marque compact upright?
Paul.
-
I will need the flat marquee for the small upright.
And a scan from the CP would be great.
-
OK, I'll see what I have. My flat marque version's been converted.
Paul.
-
Looks like I'm in the same boat as you - my converted flat marque Frogger is also missing it's marque so I'll need one of those as well :(
The control panel has many holes drilled through it, so I'll need a control panel overlay myself also :(
It looks like my complete original curvy upright uses the same small control panel overlay as the flat marque one. I think I already have a scan of it, so I'll dig it out and forward it along.
Paul.
-
Hi Paul,
thats fine.
I‘ve got a bezel from Pawel. I will try to make a scan.
-
Hi,
I found the control panel and along with an NSM flat marque :)
28.7MB
http://www.zzzaccaria.com/artwork/Frogger/Frogger control panel overlay.zip (http://www.zzzaccaria.com/artwork/Frogger/Frogger control panel overlay.zip)
10.9MB
http://www.zzzaccaria.com/artwork/Frogger/Frogger marque.zip (http://www.zzzaccaria.com/artwork/Frogger/Frogger marque.zip)
If you end up making up a repro Frogger CPO, I still need one of those myself also ;)
Thanks,
Paul.