Dragon's Lair Fans - Arcade Lifestyle
General Chat => Arcade Lifestyle => Topic started by: glstar on January 14, 2017, 10:06:26 AM
-
Finally after some years of research (and for my fault, i miss two cabs in the past)....
Thank you very much Chris.
Love this cab....
(http://i1372.photobucket.com/albums/ag327/glstar7/Cab/Rolling%20Thunder/9A98247A-03A8-4288-A8D2-9AF6F2AFB09D_zpsrlf9jqfb.jpg)
(http://i1372.photobucket.com/albums/ag327/glstar7/Cab/Rolling%20Thunder/FF26FB84-033D-45DA-B46A-34E0BA0F06AD_zpsjay24yns.jpg)
After some minutes of unpacking...
(http://i1372.photobucket.com/albums/ag327/glstar7/Cab/Rolling%20Thunder/FDB4011C-945A-472D-94A8-8811CC7B9658_zpsafyjvzuu.jpg)
(http://i1372.photobucket.com/albums/ag327/glstar7/Cab/Rolling%20Thunder/0683174C-A044-49CA-B0FF-C3C99889D4A2_zps73kytp9c.jpg)
Very good conditions and all original.
It's power supply don't work.
I'll try to have it repaired so the cab will stay original.
In the meantime i only have to understand which is the order of the power going into this Atari interface that goes then inside the jamma of the board.
Don't know if it follow the jamma standard pinout too.
(http://i1372.photobucket.com/albums/ag327/glstar7/Cab/Rolling%20Thunder/3F8BB089-2C32-4CD6-8547-88C45FA33E5D_zps95kvxo1b.jpg)
(http://i1372.photobucket.com/albums/ag327/glstar7/Cab/Rolling%20Thunder/8BEFE2A8-D6BC-4306-AEE7-5E49757EF407_zpsv11bzerr.jpg)
(http://i1372.photobucket.com/albums/ag327/glstar7/Cab/Rolling%20Thunder/DCA1FCBF-EE65-46E6-BD25-E8A169121A68_zpsooqvu22b.jpg)
(http://i1372.photobucket.com/albums/ag327/glstar7/Cab/Rolling%20Thunder/48976CDE-7244-4994-8D6A-9CFE9A05120C_zpswszd5gpy.jpg)
(http://i1372.photobucket.com/albums/ag327/glstar7/Cab/Rolling%20Thunder/FA1D8C52-D22F-4ED9-8221-AA857A1914BE_zpsxkddbkro.jpg)
(http://i1372.photobucket.com/albums/ag327/glstar7/Cab/Rolling%20Thunder/10561F75-AC79-4859-B0B1-45A21597BB3B_zps4bhb4fri.jpg)
I don't think it's a big problem, anyway if someone could tell me which is the order of the wires i appreciate.
:)
Edit.....
It's back to life...
And cables have been touched....
I use a mate'n'loc 6 pin connector...and now...
(http://i1372.photobucket.com/albums/ag327/glstar7/Cab/Rolling%20Thunder/8CBF51AC-01A5-404E-BF4E-1C25B79A4996_zpsxlgf4wcr.jpg)
(http://i1372.photobucket.com/albums/ag327/glstar7/Cab/Rolling%20Thunder/4CE6E1D7-FC8E-48C4-BA0C-4E52B7E34CDC_zpswiang7ck.jpg)
(http://i1372.photobucket.com/albums/ag327/glstar7/Cab/Rolling%20Thunder/E1AE7C2C-A914-4460-A9E5-F58091EE07AD_zpszha93wcl.jpg)
(http://i1372.photobucket.com/albums/ag327/glstar7/Cab/Rolling%20Thunder/D8990D60-373A-4630-8953-33BE407614ED_zps1om2trr6.jpg)
(http://i1372.photobucket.com/albums/ag327/glstar7/Cab/Rolling%20Thunder/1E1E5802-FB12-4800-8194-44B56956E1CB_zpszwme0vsc.jpg)
(http://i1372.photobucket.com/albums/ag327/glstar7/Cab/Rolling%20Thunder/A34B4542-BCD9-4E3F-AA7D-6338BAF4E784_zpsixszbnvb.jpg)
(http://i1372.photobucket.com/albums/ag327/glstar7/Cab/Rolling%20Thunder/7E6F646A-7B41-4FC9-949F-A1ACDE7C5C8B_zpsyn3ln3st.jpg)
(http://i1372.photobucket.com/albums/ag327/glstar7/Cab/Rolling%20Thunder/869434EB-3A83-4D57-A0BD-A4C70EE96FED_zpsrjqmycuz.jpg)
-
Nice catch
looking for one too
;)
-
Awesome pickup!
Rogerxy got one last year, think he is finished with recapping/rebuilding the elctronics and might be able to answer questions...
-
Nice catch
looking for one too
;)
Good luck for your search.
I hope you will find one.
This game is wonderful.
Awesome pickup!
Rogerxy got one last year, think he is finished with recapping/rebuilding the elctronics and might be able to answer questions...
Oh thanks.
Would be great if he can clear that for me.
Strange that this is not on the user manual....
:(
-
Only one small hickup, he is in Sidney at the moment, think ge will be back home next week, and I bet you have it all figured out by then :D
-
Only one small hickup, he is in Sidney at the moment, think ge will be back home next week, and I bet you have it all figured out by then :D
Well maybe i can look at this early next week.....
So don't know if i figure first then he return.
;D ;D ;D
-
Great pickup, Chris is great dealing with :)
As Pinge says I'm in Australia, will be home next week the 18th. If you still have questions then I will be happy to help you :pac:
-
Great pickup, Chris is great dealing with :)
As Pinge says I'm in Australia, will be home next week the 18th. If you still have questions then I will be happy to help you :pac:
Yes very true.
Thanks for the help.
I should have solved it.
1-2-3 should be GND
4-5 should be +5V
6 should be +12V
Info from a nice guy here in Italy, confirmed from an old post from the great KenLayton.
I'm really excited now....
I want to put my hands on the cab now...
:)
-
EDIT: I see you know it's actually Jamma and was actually enquiring about the wires feeding into the adapter board. So disregard this post:
The connector on a standard Atari Ireland Rolling Thunder is Jamma standard. In your 4th picture you can see "JAMMA" silkscreened onto the board.
It doesn't have the -5V connected if you try and put a different board in there that requires it.
-
It's back to life...
And cables have been touched....
I use a mate'n'loc 6 pin connector...and now...
(http://i1372.photobucket.com/albums/ag327/glstar7/Cab/Rolling%20Thunder/8CBF51AC-01A5-404E-BF4E-1C25B79A4996_zpsxlgf4wcr.jpg)
(http://i1372.photobucket.com/albums/ag327/glstar7/Cab/Rolling%20Thunder/4CE6E1D7-FC8E-48C4-BA0C-4E52B7E34CDC_zpswiang7ck.jpg)
(http://i1372.photobucket.com/albums/ag327/glstar7/Cab/Rolling%20Thunder/E1AE7C2C-A914-4460-A9E5-F58091EE07AD_zpszha93wcl.jpg)
(http://i1372.photobucket.com/albums/ag327/glstar7/Cab/Rolling%20Thunder/D8990D60-373A-4630-8953-33BE407614ED_zps1om2trr6.jpg)
(http://i1372.photobucket.com/albums/ag327/glstar7/Cab/Rolling%20Thunder/1E1E5802-FB12-4800-8194-44B56956E1CB_zpszwme0vsc.jpg)
(http://i1372.photobucket.com/albums/ag327/glstar7/Cab/Rolling%20Thunder/A34B4542-BCD9-4E3F-AA7D-6338BAF4E784_zpsixszbnvb.jpg)
(http://i1372.photobucket.com/albums/ag327/glstar7/Cab/Rolling%20Thunder/7E6F646A-7B41-4FC9-949F-A1ACDE7C5C8B_zpsyn3ln3st.jpg)
(http://i1372.photobucket.com/albums/ag327/glstar7/Cab/Rolling%20Thunder/869434EB-3A83-4D57-A0BD-A4C70EE96FED_zpsrjqmycuz.jpg)
-
Great to see it up & running :D
-
Good job, looks like the cabinet is in overall ok condition!
Now who of you Rolling Thunder owners is the best player? lets see some hiscores posted :D
-
Great to have it running again.
Now i want to fix wirings and aestethical conditions.....
I just see that seems to be only US control panel overlay.
Anyone knows where i could get a repro CPO for the Euro version of this cabinet?
-
great! and you wanted to have it up and running so badly, you didn't even take it off the pallet 8)
-
great! and you wanted to have it up and running so badly, you didn't even take it off the pallet 8)
;D
I'll do this shortly.
:lol: :lol:
-
Good job, looks like the cabinet is in overall ok condition!
Now who of you Rolling Thunder owners is the best player? lets see some hiscores posted :D
Well...... I hold the World Record on MAME with a score of 1,023,380....
-
Mame is Lame :lol:, but I guess you are quite good on the real deal aswell?