Dragon's Lair Fans - Arcade Lifestyle
General Chat => Artwork => Topic started by: DarthNuno on August 22, 2016, 10:08:09 PM
-
OK, as requested, let's scan of the instructions sticker from my Buggy Boy *triple screen* 8)
(https://www.dragonslairfans.com/buggy_boy/buggy_boy_instructions_0.jpg)
As you can see, the only way to properly scan it is ... to remove the top panel... which is fortunately quite easy : only 3 screws! :)
(https://www.dragonslairfans.com/buggy_boy/buggy_boy_instructions_1.jpg)
Arg, too bad... the sticker is slightly bigger than my A4 scanner :? So two passes will be needed...
(https://www.dragonslairfans.com/buggy_boy/buggy_boy_instructions_2.jpg)
But here it is :
(https://www.dragonslairfans.com/buggy_boy/buggy_boy_instructions_full.jpg)
(the big .tif file is available here (http://www.arcadelifestyle.net/buggy_boy/buggy_boy_instructions_full.tif))
As you can see, my sticker is not perfect... and you can see the 'assembling' border. Anyway it's a good start for the illustrator and other vectors softwares expert guys here! ;)
-
Anyway it's a good start for the illustrator and other vectors softwares expert guys here! ;)
Tif downloaded..
Measurements please ::)
-
Amazing thank you!
-
Measurements please ::)
:arrow: 31.7cm per 11.1cm
-
made a start, but i really feel the urge to fix this :
(http://www.opdenkelder.com/pics/buggyboy/wrongcurve.jpg)
after "fixing":
(http://www.opdenkelder.com/pics/buggyboy/correctcurve.jpg)
looking at the left side of this, it seems that the layers where shifted during printing, so i guess it should line up correctly if they silkscreended it more accurate..
(http://www.opdenkelder.com/pics/buggyboy/shifted1.jpg)
(http://www.opdenkelder.com/pics/buggyboy/shifted2.jpg)
so my guts say fix it, what you guys think ?
-
I can work with your file, but its 72 dpi...
could you rescan it in 300 ?
Or are the two scans higher res and after stitching it was 72 ?
I can stitch them myself if needed ;)
-
Cool I like this kind of stuff
-
Here's the two initial files, before assembling, in 300 dpi :
part1 (http://www.arcadelifestyle.net/buggy_boy/bboy1.tif)
part2 (http://www.arcadelifestyle.net/buggy_boy/bboy2.tif)
-
Thanks !
-
Amazing ;)
-
Hi all
Did this sticker get vectored?
Thank you
-
have not done it yet.
it has been a long time i did some vectorwork
Dont know if i ever will do it