Dragon's Lair Fans - Arcade Lifestyle

General Chat => 'Business' Area : Buy/Sell/Trade => Topic started by: monkfish on September 26, 2015, 08:25:48 PM

Title: coin reject bezel
Post by: monkfish on September 26, 2015, 08:25:48 PM
hello,
could somebody help me to get this (see foto's)
height 5 cm
wide 5,10 cm
depth 2,80 cm
the opening is:
height 3,30 cm
wide 2,50 cm
greets

Title: Re: coin reject bezel
Post by: Belike on October 27, 2015, 09:12:40 PM
Finally I found that old coin door. ;D
Unfortunately it is painted to black, but if its okay, it is yours for free. ;)
I can remove both if you want, shipping the whole coin door would kill the fun. :lol:
(https://lh3.googleusercontent.com/-KkMEwlUvhtE/Vi_Z2VWrW2I/AAAAAAAAJgA/Zml8YUhPF1w/s912-Ic42/WP_20151027_16_40_21_Pro.jpg)

(https://lh3.googleusercontent.com/-f0dIJfjdoTE/Vi_Z3IybeCI/AAAAAAAAJgM/ByvNybwfAkc/s912-Ic42/WP_20151027_16_40_31_Pro.jpg)
Title: Re: coin reject bezel
Post by: Luigi on October 28, 2015, 08:15:00 AM
ah, there it was. I recently had such a piece in my hands and knew that somebody was searching for it but couldn't remember who or in what forum. I can check it with the pictures to be sure it's the same.

But I have only one! So if you need two you better go with Béla :)
Title: Re: coin reject bezel
Post by: Luigi on October 29, 2015, 07:25:29 AM
There you go :)


http://361610.test-my-website.de/_temp/20151028_191532.jpg

http://361610.test-my-website.de/_temp/20151028_191511.jpg


I think it could be shipped for 3.45EUR outside Germany.


Title: Re: coin reject bezel
Post by: Belike on October 29, 2015, 10:01:51 AM
Looks much better than mine. :spaceace:
Title: Re: coin reject bezel
Post by: Luigi on October 29, 2015, 10:14:25 AM
and you can leave your coin door complete :)

Title: Re: coin reject bezel
Post by: monkfish on November 05, 2015, 03:37:03 PM
thank you
do one of you have also the a red coin reject button who fits 1€
mine is to small
greets hans
Title: Re: coin reject bezel
Post by: Luigi on November 05, 2015, 03:53:56 PM
Should be around somewhere.....will dig.....
Title: Re: coin reject bezel
Post by: vernimark on November 05, 2015, 05:01:44 PM
I think I have everything you need. Give me the w.e. to take pics
THose things are in Milano and I've to o there for the w.e.
Title: Re: coin reject bezel
Post by: monkfish on November 09, 2015, 05:27:08 PM
any progress in the dig
greets hans
Title: Re: coin reject bezel
Post by: Luigi on November 10, 2015, 03:22:23 PM
any progress in the dig
greets hans

thanks for the reminder  :oops:
Title: Re: coin reject bezel
Post by: Luigi on November 15, 2015, 12:46:49 PM
OK, I found it. But it was made for 1 DM-coin which used to be a little bit smaller (in both height and width)....obviously. The coin gets stuck after 1mm.

http://361610.test-my-website.de/_temp/20151115_123141.jpg (http://361610.test-my-website.de/_temp/20151115_123141.jpg)


If you cannot find the right one mine could be modified with a thin file to make the 1 Euro slip through.


edit: done :)
(garbage has been removed meanwhile)

http://361610.test-my-website.de/_temp/20151115_132016.jpg
Title: Re: coin reject bezel
Post by: monkfish on November 15, 2015, 02:20:09 PM
thanks,
can you send it to me
greets hans
Title: Re: coin reject bezel
Post by: Belike on November 15, 2015, 04:08:27 PM
Nice one! :spaceace: