Dragon's Lair Fans - Arcade Lifestyle
General Chat => Artwork => Topic started by: Etienne MacGyver on March 20, 2014, 02:01:50 PM
-
I have had this long on the "todo list", and finally i started and finished it.
Donkey Kong Cocktail Table Control Panels Vectorised for Reproduction By Etienne
there are two different metal control panels;
(http://www.opdenkelder.com/pics/DKCTCP.png)
I made 2 layers, one with the ink, and the other containing the cut / mill lines.
as seen in the sample pics, there is a "028M" and a "028S" variant.
I started with the "028M"
(http://www.opdenkelder.com/pics/028M.jpg)
After that i did the adjustments to that file to create "028S"
(http://www.opdenkelder.com/pics/028S.jpg)
if you want them, here are the download links:
028M.pdf (http://www.opdenkelder.com/pics/DKCTCP028M.pdf)
028S.pdf (http://www.opdenkelder.com/pics/DKCTCP028S.pdf)
-
Thanks a lot !!!
-
I have NOS with plastic protection on top :P
(not for sale)
-
wow ! thats cool robin !
-
Good job, Etienne :)
I think Zorg (http://forums.arcade-museum.com/showthread.php?t=41277) was looking for these ones back in 2008. Maybe he's still interested on them ;)
-
Zorg is here also, and is free to take them ofcourse.
In the past i emailed all my work to him, but i have not heard of hime lately
I hope he is fine
-
I hope he is fine
Thanks for the inquiry
I'm fine. just over busy and taking some breath to the vectorisation and forum activity
anyway, I'm still ok to host vector artwork on vectorlib, do not hesitate if you want to share.
-
Thanks mate! Now I can replace my Helifire cocktail....
-
I hope he is fine
Thanks for the inquiry
I'm fine. just over busy and taking some breath to the vectorisation and forum activity
anyway, I'm still ok to host vector artwork on vectorlib, do not hesitate if you want to share.
Good to hear you are ok Eric !
Feel free to take them, the links are working ;)