Dragon's Lair Fans - Arcade Lifestyle
General Chat => 'Business' Area : Buy/Sell/Trade => Topic started by: joeks on February 21, 2012, 09:53:53 AM
-
Anyone interested in my Over / Under coin door?
I have no use for it anymore.
It has to go, altough the cat doesn't like the thing gone.
It's for free. Pickup prefered, else you pay postage.
The pics are BEFORE professional power coating (so not done by me).
Now it looks a lot better. Bucket, coin mechs and wiring are currently not assembled (but are included).
Can take a new pic tonight if needed.
Pickup possible in Goes, the Netherlands.
(http://2.bp.blogspot.com/_FpoNMI8SwJY/R-f6GU0DAPI/AAAAAAAAALM/JyqVT6a7ySg/s320/DSC03860.JPG)
(http://2.bp.blogspot.com/_FpoNMI8SwJY/R-f6HU0DAQI/AAAAAAAAALU/uOJaotnB8Gc/s320/DSC03863.JPG)
(http://1.bp.blogspot.com/_FpoNMI8SwJY/R-f6IE0DARI/AAAAAAAAALc/71Qj08wDQto/s320/DSC03878.JPG)
Thanks!
Barry
-
if noone else from the netherlands is interested, i'd take it!
-
Noted Ully! :)
-
I'm interested too, if you can ship to France.
It's for a Centipede Cabaret ;).
-
I could use it for my SW cockpit, the lower door has holes and dents which I forgot to fix before it was powder coated.
(http://gallery.me.com/andre.huijts/100027/DSCF4038/web.jpg?ver=12563111820001)
-
ofcourse i dont want to take sides, but I think it would look great in the SW from Andre judging from what i saw in real life what is in there now.. (in fact i installed it after the powdercoating) and IMHO it really deserves a better looking coindoor. (no offence ofcourse, the powdercoater did a great job, but the dents where not fixed before..)
and its in the netherlands ;)
-
go get it, andré!!! :spaceace:
-
Well Andre,
if you are in the area sometime, you're more than welcome to pick it up :)
I also have a box full of PCB's to get rid of.
Bought them untested.
Most are pre-Jamma, which makes it difficult for me to test them.
Some Taito, some Konami (Hyper Olympics) and a lot of bootlegs (a Ms. Pacman is in there amongst others).
I can take pic's of the boards, maybe some of you can help identify.
That would be fun :)
-
I can take pic's of the boards, maybe some of you can help identify.
That would be fun :)
Sounds cool, some pics would be great. ;)
If there is any Zaccaria pcb, I would take them all and the Hyper Olympic also.
-
Well in all honesty JCP was first...
-
I also have a box full of PCB's to get rid of.
Bought them untested.
Most are pre-Jamma, which makes it difficult for me to test them.
Some Taito, some Konami (Hyper Olympics) and a lot of bootlegs (a Ms. Pacman is in there amongst others).
I can take pic's of the boards, maybe some of you can help identify.
That would be fun :)
taito - cool! some pics would be perfect!!!
-
I will take pics tonight.
To be honest, I am curious too of what is in the box :)
There's a Nintendo Mario Bros (or DK3) which I will probably keep for myself,
along with 1 of the 2 Konami Hyper Sports I think.
The rest is up for grabs, but I can't say if they are working or not since I can't test them properly.
-
Found some sneak peak photo's on my iPhone :)
Don't worry, will take hi-res pics tonight!
(http://desmond.imageshack.us/Himg163/scaled.php?server=163&filename=16004843.jpg&res=medium)
(http://desmond.imageshack.us/Himg440/scaled.php?server=440&filename=51568969.jpg&res=medium)
What is this board used for?
(http://desmond.imageshack.us/Himg19/scaled.php?server=19&filename=79278419.jpg&res=medium)
(http://desmond.imageshack.us/Himg37/scaled.php?server=37&filename=59751083.jpg&res=medium)
-
Well in all honesty JCP was first...
In fact Ully was first.
I need it for my Centipede, but, if it's easier for Barry to give it to you, go ahead André ;).
Otherwise, you can give me the shipping cost, Barry, I'm ready to pay the fees.
-
isn't the centipede door different?
-
It looks like the same for me (I've got the cabaret version).
-
ah, i was talking about the upright..
-
OK if you really don't mind, it's an offer I can't refuse joeks !
PM sent !
P.S. I'll take the original working Q*bert board-set........what ? Not in there......ahhhh....there goes my day dream ! ;D ;D ;D ;D
-
Well, André, I take it if joeks is ok to do the package (see my previous messages).
-
Ok, now I am confused...
-
Thanks for the replies,
glad to know this stuff is more than welcome with you guys.
The coin door is reserved for Andre since he can pick it up.
I am very sorry Ully and JCP, but I prefer pick up.
Maybe you guys can take some free pcb's instead?
Will take pics in an hour orso, kids bathing time first!
Thanks!
-
The coin door is reserved for Andre since he can pick it up.
I am very sorry Ully and JCP, but I prefer pick up.
Maybe you guys can take some free pcb's instead?
no problem at all, i totally understand and as i've said: if noone would have shown interest i would have taken it, but i'm happy to see it go to someone who can actually use it immediately. as for the pcbs, always interested in taito stuff, let's see what you have got!
thx a lot for giving away some of your stuff, really really great gesture! :spaceace:
-
Ok, sorry for the delay, but here it is.
It would be nice if you guys can help identify some of these pcb's.
Don't know if they are somehow working or easy to fix, but they are all for free.
I'll keep the Nintendo board (but don't need the adapter thing I guess) and one Hyper Sports board.
(http://img513.imageshack.us/img513/5663/dsc02873e.jpg)
#1 TAITO - Space Cruiser
(http://img24.imageshack.us/img24/2650/dsc02874cs.jpg)
#2 Crazy Kong
(http://img546.imageshack.us/img546/7696/dsc02875fy.jpg)
#3 Street Fighter 2 Turbo
(http://img864.imageshack.us/img864/7278/dsc02885r.jpg)
#4 TAITO - ?
(http://img20.imageshack.us/img20/3293/dsc02877c.jpg)
#5 MODEL RACING - Dribbling
(http://img827.imageshack.us/img827/9817/dsc02878o.jpg)
#6 TAITO - Incomplete boardset
(http://img692.imageshack.us/img692/4226/dsc02879r.jpg)
#7 NAMCO Super Pac Man
(http://img252.imageshack.us/img252/3005/dsc02880f.jpg)
#8 KONAMI - Hyper Sports
(http://img684.imageshack.us/img684/2637/dsc02881o.jpg)
#9 KONAMI - Hyper Sports
(http://img838.imageshack.us/img838/3966/dsc02882jg.jpg)
#10 Knock Out
(http://img651.imageshack.us/img651/678/dsc02883y.jpg)
#11 Wonder Boy III Monster Lair
(http://img39.imageshack.us/img39/7854/dsc02886km.jpg)
#12 Pengo
(http://img703.imageshack.us/img703/3553/dsc02887mq.jpg)
#13 Street Fighter 2?
(http://img198.imageshack.us/img198/7657/dsc02888gq.jpg)
#14
(http://img853.imageshack.us/img853/2020/dsc02889w.jpg)
#15 NINTENDO - Filter board for Punch-Out
(http://img3.imageshack.us/img3/3121/dsc02890b.jpg)
#16 NINTENDO - Punch-Out
(http://img546.imageshack.us/img546/4479/dsc02891yl.jpg)
#17 TAITO - Grand Champ
(http://img267.imageshack.us/img267/5853/dsc02892j.jpg)
#18
And Andre's new coin door, pens not included
(http://img688.imageshack.us/img688/7300/dsc02893tu.jpg)
(http://img560.imageshack.us/img560/6568/dsc02895k.jpg)
(http://img827.imageshack.us/img827/1796/dsc02894ab.jpg)
-
VERY interested in
#16 (nintendo pcb) and one of the hyper sports (along with the "manual")!
i'd also be up for #1 (space cruiser) and those incomplete taito boards (#4 & #6) if noone else is interested in them ...
EDIT: just read that you are keeping the nintendo board for yourself - sorry!
-
Can't help too much in the identification, but I'm interested in the Crazy Kong pcb and instruction card, Knock Out and the Hyper Olympic/Sports. ;)
Maybe this could help with the Taitos:
https://www.mikesarcade.com/cgi-bin/spies.cgi?action=url&type=info&page=TaitoBoardList.txt
Edit:
The blue one is a Pengo boot, there is a black marker sign on it. :D
-
Monster Lair....... is that Wonder Boy III Monster Lair ?
I'm not 100% sure, but IIRC Wonder Boy PCB's are quite valuable ?
-
The Nintendo board set is a Punch Out ! The flat-cables and the three-battery compartment give it away (code CHPI)
Confirmation here: http://www.arcade-museum.com/pcb_list.php?manuf_id=1546
(back side here: http://www.crazykong.com/pcbs/P%20-%20S/Punchout.pcb.html)
B.t.w love the coin door !
-
The small Nintendo board probably belongs to the Punch Out, it's a "filter board" with just some capacitors, some stupid FCC rule made this necessary. I always remove them as they can only introduce trouble (extra resistance etc.)
#12 is a bootleg Pengo (http://www.crazykong.com/pcbs/P%20-%20S/PentoPengobl.pcb.html)
-
I have a dedicated Punch Out with a non working PCB - i would be interested...
-
That CK is a bootleg, the second connector is "unconnectable" ;)
(i have the same here.. also there is no falco logo printed on the pcb)
anyway, still is a nice board ;D
-
Thanks so far for helping out identifying these boards.
Since the Nintendo board is a Punch Out, I've decided it's up for grabs as well,
along with the two Hyper Sports.
Was hoping for a DK3 or Mario Bros.
I made up your wishlists so far:
Ully
- Konami Hyper Sports + copy manual
- Space Cruiser
- All other Taito boards
Belike
- Crazy Kong bootleg + art
- Knock Out
- Konami Hyper Sports
Muerto
- Nintendo Punch-Out
Level42
- Coin Door
Chrischris
- Street Fighter 2 Turbo bootleg
Laschek
- Namco Super Pac-Man
- Dribbling
Eric
- Wonderboy III Monster Lair
- Pengo bootleg
Vnera
- Street Fighter 2 bootleg
Etienne
- 2 x MTC 900 manual
-
Ully
- Nintendo board Punch-Out. (but since Muerto has a non-working dedicated Punch-Out cabinet, maybe give it to him?)
why should i give anything to that british danish dude? ;)
joking aside, of course michael can have it, it's for a good cause!!!
-
why should i give anything to that british danish dude? ;)
LOL. ;D
Thanks for this great effort Joeks, we owe you one. ;)
-
Thanks Ully, for letting the Nintendo Punch-Out go to Muerto.
Wish lists updated :)
Still some unidentified and available people!
Else they are going in the dumpster in a few weeks.
Feel bad about throwing away a Capcom SF2 pcb with minor-defect, DK and Ms. Pacman bootlegs some time ago :(
Giving them away is much better.
-
michael has a grand champion cockpit, doesn't he?
-
Thanks Ully, for letting the Nintendo Punch-Out go to Muerto.
Wish lists updated :)
Still some unidentified and available people!
Else they are going in the dumpster in a few weeks.
Feel bad about throwing away a Capcom SF2 pcb with minor-defect, DK and Ms. Pacman bootlegs some time ago :(
Giving them away is much
Ouch, throwing away is really a shame, at the very least there are always reusable parts like processors, EPROMS and RAMS on them !!
-
Here's an idea: André picks up the boards for Ully and will drop them at my place when he'll visit.
Ully has some stuff to pick up here too so that would save him shipping.
Meanwhile I'd gladly take the SF2 board (and if you're throwing away other boards I'd take them too if nobody is interested of course).
Many thanks!
-
Here's an idea: André picks up the boards for Ully and will drop them at my place when he'll visit.
Ully has some stuff to pick up here too so that would save him shipping.
i was about to ask andré the exact same thing! i'll be visiting chris the first week of april, don't know if andré is up for a roadtrip until then ...
-
Planning is to do the "Chris-trip" before the end of march so that would fit nicely.
I can of course also pick up the boards for Béla if he can wait unitl Eurocade....OR I can ship them back including the fixed WG board.....but noto 100% sure it that will be earlier ;);)
-
Well, I let you guys decide on how to get the boards to their new homes.
I really don't mind shipping them all, but that might cost a bit and I don't know if it's worth it for untested boards.
A roadtrip or meet at Eurocade sounds better I think.
@chrischris Wishlist updated! :)
-
Talking about Eurocade, will you join Joeks ?
-
Talking about Eurocade, will you join Joeks ?
Sounds cool Etienne! But have no classic cabinets to take with me whatsoever.
But a bunch of Japanese candy's, Cave pcb's and a home-made Donkey Kong replica :)
-
#13 might be another Street Fighter II bootleg
#7 is a Namco Super Pac Man
#5 seems to be a Dribbling
I might be interested in #5 and #7 ;)
-
From the Eurocade webpage;
Eurocade is a meeting of European collectors of classic arcade (video) games.
A meeting, where the goal is that collectors bring one (or more) of their games with them so all of them can enjoy eachothers’ games...
But of course, the first, and most important goal, is to bring together people from all over Europe who enjoy collecting, restoring, fixing and playing those classic arcade videogames.
It is ofcourse a goal and the whole idea behind eurocade , but not a requirement.
In your case there is nothing you can bring because an original DK is already there..
-
#13 might be another Street Fighter II bootleg
#7 is a Namco Super Pac Man
#5 seems to be a Dribbling
I might be interested in #5 and #7 ;)
Added you to the wishlist! :)
-
(http://img3.imageshack.us/img3/3121/dsc02890b.jpg)
I hope these still got the data in the eeprom's...
they look "open" to me instead of sealed..
at least the batteries are removed, so its possible that there is no acid damage
-
I think those eproms must be exposed to daylight for a longtime until the data takes damage.
If even if they are corrupted, just erase and reprogram, the data should be easily available ;)
@joeks: thanks!
-
I have plenty of boards (also in cabs) with uncovered EPROM windows. There's no problem unless you put them in direct sunlight for a very long time....
FI my SW/ESB kit came without covers...
Speleo_DE should be able to confirm wether the Model Racing PCB is a Dribbling as he has a working machine.
-
I have a working Dribbling machine as well, just not here at my work place ;D
-
If even if they are corrupted, just erase and reprogram, the data should be easily available ;)
@joeks: thanks!
That's what I thought :)
And, no thanks you're welcome!
@etienne I had a brief look at the board yesterday and didn't see any acid damage at first sight.
The Nintendo filter-board however, has a homemade burnt trace as you can see on the pic.
I tried both sides (part- and solderside) of the Jamma connector when the normal side wasn't giving a picture :) Yeah, real stupid I know.
-
Planning is to do the "Chris-trip" before the end of march so that would fit nicely.
I can of course also pick up the boards for Béla if he can wait unitl Eurocade....OR I can ship them back including the fixed WG board.....but noto 100% sure it that will be earlier ;);)
Yes André, please pick them up and send me back with the WG board BEFORE Eurocade. ;D ;D ;D
My Brother will take the Zacc bezel and the Atari psu to Chris's place this week on the way to Charleroi, so you can also take them. ;)
-
Excellent Béla..... :)
Hey Michael,
If you are coming to the South coast slam I can bring the Punch Out board for you !!!
Man, I LOVE the European Arcade Collectors Distribution Network (TM).
-
If you are coming to the South coast slam I can bring the Punch Out board for you !!!
Maby another reason for me to go!
-
Nice action Joeks!!
I'm in for the wonderboy (if André isn't) and the Pengo. If not taken yet. André could collect them for me, I suppose.
-
If you are coming to the South coast slam I can bring the Punch Out board for you !!!
Maby another reason for me to go!
What ? You mean drinking a beer (or two) with Alpha1, Rav, Gyruss and me isn't enough reason ? ;D ;D ;D ;D ;D ;D ;D
-
Nice action Joeks!!
I'm in for the wonderboy (if André isn't) and the Pengo. If not taken yet. André could collect them for me, I suppose.
By all means have the wonder boy Erik I'm not interested in it....and I think it will look great in a candy :)
Yeah....looks like I will simply pick up the whole lot and distribute it.......I'm sure my wife is going to love me even more ;D ;D ;D ;D ;D
-
Hi Eric,
I will put you on the list for the Wonderboy and Pengo boards :)
If Andre want to collect them all, fine by me.
They are all in one big heavy cardboard box, pcb's packed in anti-static bubble wrap.
-
Hi Eric,
I will put you on the list for the Wonderboy and Pengo boards :)
Great, thanks. :)
-
If still available would like the streetfighter 2. To bad I'm to late for the other street fighter pcb :?
-
Hi Vnera,
Put you up for the second Street Fighter 2 bootleg.
At least, I hope for you the board IS a SF2 :)
-
So, do you have a list of which one's I should bring with me next weekend ?
-
If you are coming to the South coast slam I can bring the Punch Out board for you !!!
Maby another reason for me to go!
What ? You mean drinking a beer (or two) with Alpha1, Rav, Gyruss and me isn't enough reason ? ;D ;D ;D ;D ;D ;D ;D
I´m not going - need some vacation, and we are going to Grand Canaria.....
-
:'( :'( :'( :'( :'( :'( :'( Bohoooo !!! ;)
Have fun ! :)
-
:'( :'( :'( :'( :'( :'( :'( Bohoooo !!! ;)
Have fun ! :)
Hehe - i know, would have been great to meet you guys again!
-
So, do you have a list of which one's I should bring with me next weekend ?
Not yet Andre,
But we are going to sort that now :)
So, who (on the list) wants their stuff send through post by me,
or who wants Andre to take your stuff so he can distribute it to you guys later sometime.
Please let me know so I can arrange the packages.
-
We arranged with André to take my stuff. ;)
Belike
- Crazy Kong bootleg + art
- Knock Out
- Konami Hyper Sports
-
How much is shipping to Germany for the two boards?
-
How much is shipping to Germany for the two boards?
Hey Sascha!
If André picks up all the boards and it is ok for him to take the "German boards" to Chris when he visits him, I can bring them over here when I for my part visit Chris the first week of April! Just a thought ...
-
That would be awesome!
You could then send them to me or if you like to pay me a visit - I might have an "MSG" and an "TV Ideal" adapter (adapter to Jamma) for your test station ;)
-
No problem !
-
Thanks André!
-
You could then send them to me or if you like to pay me a visit - I might have an "MSG" and an "TV Ideal" adapter (adapter to Jamma) for your test station ;)
let's see, i could pick up the rolling thunder as well ;D (have you noticed, sascha, that the crystal castles remarks have stopped?).
regarding that adapter: as i've said (and shown), there are tons of adapters included, the question still remains what do i do if i want to test a pcb like bubble bobble? what do i need? what do i have to build? perhaps i already have everything i need ...
-
Simple, try the one's that fit. If no smoke, it MIGHT be the right one.....
-
I would like to have one of the MTC900 Manuals please..
And if the swedish guy dont want the other, i can use both since i got two zacc's with both an MTC900 in it..
trashing them would be a shame, so if you want to get rid of them, i am in for at least one, and if nobody is interested in the other, i will also gladly take that one
Pickup by Andre, is very fine for me ;)
Thanks !
-
@Etienne and everyone else:
I have about 50 MTC900 Manuals to give away. For free, just shipping. ;)
Also a few MTC9000 and others. I guess I also still have a few generic Zaccaria manuals, the crappy photocopied ones.
@Ully:
I give you an example, it's really easy. You need a fingerboard, a connector, a few wire clips, and the appropriate pinout of your game.
This is an adapter I made to test Konami boards like Amidar or Time Pilot on my Jamma MAK:
(http://img7.imagebanana.com/img/alb7imyo/IMG_63831.jpg)
On the left you see the fingerboard with 2x28 pins to fit the Jamma connector of my MAK.
On the right you see a 2x18 pin connector which fits the Amidar PCB.
You take a look at the pinout listing of the game and find the pin where eg. GND is connected. Find the GND pin on the Jamma side and connect them. Do this for all the connections you need. Finished.
Note that in this particular example the adapter can be used with quite a number of games which all use the "Konami Classic" or "Scramble" pinout. This is not always the case. In fact many pre-Jamma games have their own unique pinout.
Plus it is possible that bootlegs may have a different pinout than their original counterparts.
Also have in mind that some boards can't be fully adapted due to strange voltages, special controls, etc. which Jamma doesn't provide. For expample I made I Jamma adapter to test our Pole Position boards. Of course my MAK doesn't have a steering wheel and sound is also hard to connect in this case, but it's enough to see if the board works or not.
Concerning the test station you have:
-Instead of the Jamma fingerboard you need one that fits your "TV Ideal" connector (more pins) or a loom for the "MSG" connector.
-So I suggest you make (or find) a Jamma to MSG adapter or a Jamma to TV Ideal adapter (or both) and adapt your to-be-tested-games to Jamma. Because Jamma fingerboards are easier to find (arcadeshop.de has them) and I guess cheaper than TV Ideal fingerboards or those MSG/Hellomat looms.
-
thx sascha, but let's continue the discussion in my testing station thread if you don't mind, this thread is reserved for the free stuff!
-
I would take a MTC 9000 and some Zacc manuals, or share them with Etienne if he also need some. ;)
-
I would take a MTC 9000 and some Zacc manuals, or share them with Etienne if he also need some. ;)
The MTC 9000 manual from Laschek I pressume, since I only have two MTC 900 manuals.
Those are for Etienne then :)
-
Thanks Joeks ;)
-
Thanks Joeks for the SF PCB and thanks André for the transportation!
-
I will sort and pack the stuff tomorrow, so they are ready for Andre to pick them up on saturday :)
Thank you all for your help and interest!
-
thank YOU!!!
-
Thanks a lot, I will send some pics from the testing process. ;)
-
thanks very much Joeks! :)
-
I am very interested in the testing of the pcb's. Some boards look better than others, but then again.
looks ain't everything. Hope for you guys you get some working pcb's but I cannot guaranty that.
They were in some guy's storage before I bought them. He never tested them since he was more into pinball.
And I couldn't test them because I only have Japanese candy cabinets (Jamma and no -5V).
-
Everything sorted and labled.
Don't worry Andre, they're already stacked neatly in a huge box :)
(http://img827.imageshack.us/img827/5655/foto5mg.jpg)
-
Excellent !!!! And exactly how I hoped it would be because Im chaotic enough to mix everything up if it wouldnt be neatly packed and labeled like that :)
-
We love you Joeks ! ;D
-
Sascha, I would like a Hantarex 9000 manual....anyway to get it st Aully's before his trip to ChrisChris?
-
No proplem, I can send it to Ullys place.
-
Thanks !
-
I love these kinds of packages, thanks again Joeks. :D
@Sascha:I would also take a H 9000 and the Zacc manuals if they are still available. :)
-
No problem, I have to figure out hipping to Hungary.
How many Zacc manuals do you want?
-
No problem, I have to figure out hipping to Hungary.
How many Zacc manuals do you want?
You should leave them at Ully's, I already have some Zacc stuff there waiting for pickup. ;)
What Zacc manuals do you have? :oops:
-
Nothing special, just those cheaply done generic manuals which came with mainly the starsplash cabs I think.
I have 12 of them, you can have them all if youi want, I don't need them.
(http://img6.imagebanana.com/img/tk95dnxj/IMG_6394.jpg)
-
11 for bela then, and one for me please ;)
-
Ok, I would take all the 12 and sell one to Etienne. ;D ;D ;D
-
Ok, I would take all the 12 and sell one to Etienne. ;D ;D ;D
DEAL ! :D
-
Thanks Joeks. :)
-
Yesterday Andre picked up all the PCB's and his coin door.
Was nice meeting you Andre, and thanks for the Palm beer :)
No thanks Eric :)
-
So let's see:
André 1x Hantarex 9000 manual
Etienne 1x Zacc manual
Bela 1x Hanta 9000 + rest of the zacc manuals
Correct?
Etienne, you live close to André? So I send all the manuals to Ully, Bela's are going to be picked up from there and Ully takes the others with him when he visits I-can't-remember-who?
-
someone please draw a map! :D
-
Etienne, you live close to André? So I send all the manuals to Ully, Bela's are going to be picked up from there and Ully takes the others with him when he visits I-can't-remember-who?
Yep, no problem Thanks !
Last stop is chrischris i think :D
-
Ully, I need your address ;D
Or would "Superully in Lauda" be enough? ;D
-
That's great and I take the postal charges of course. ;)
-
Ully, I need your address ;D
Or would "Superully in Lauda" be enough? ;D
Make that "Local Lunatic arcade machine horder, Lauda". Works for me in Ridderkerk everytime ;););)
-
Make that "Local Lunatic arcade machine horder, Lauda". Works for me in Ridderkerk everytime ;););)
you can even leave "lauda" out of the equation! :D
-
OK folks....I got the entire box full of PCBs here so now let's establish transport....
I think most I have to bring to ChrisChris soon but some I don't know (or am too lazy to read through the entire thread to see), so please indicate what you guys want:
Stuff from: Do:
Ully: Bring to ChrisChris
Belike: Send with WG pcb
Muerto: Keep till Eurocade 2012
Chrischris: Bring to ChrisChris (I guess.... ;))
Laschek: ?
Erik: Special delivery arranged for you sir, next wednesday or thursday, please check your e-mail ;)
Vnera: ?
Etienne: hand it over soon ;)
-
Make that "Local Lunatic arcade machine horder, Lauda". Works for me in Ridderkerk everytime ;););)
Lets see if the dutch postalservice thinks the same ;)
Keep an eye on your mailbox this comming week Andre :D
-
Please send me by post with the working wg pcb. ;)
-
Bump, edited Erik & Béla... PM sent to Muerto, Vnera and Laschek....
-
Bump, edited Muerto.
-
Make that "Local Lunatic arcade machine horder, Lauda". Works for me in Ridderkerk everytime ;););)
Lets see if the dutch postalservice thinks the same ;)
Keep an eye on your mailbox this comming week Andre :D
Looks like it worked ;D
https://www.dragonslairfans.com/smfor/index.php?topic=3134.msg48198#msg48198
-
I received my boards today by a very special delivery arrangement. Thanks André. And it was good to hear that your folks enjoy the area here, especially with this very nice weather.
-
Now wasnt that nice coincidence ? ;)
2 boards delivered, al to to go ;)
Vnera asked if I could ship them or keep till Eurocade so all is clear now.
-
i'll take laschek's boards with me over to germany!
-
Manuals ready to ship ;D
(http://img6.imagebanana.com/img/r475ff2r/IMG_6499.jpg)
-
;D guess i have to return from beirut quickly where i'm currently loading that 3-player rampage into my car ...
sent from my motorola dynatac 8000
-
Finally the pcbs arrived from Brussels and I had time to test them
Hyper Sports, runs fine :D
(https://lh4.googleusercontent.com/-E--Gspxu_xc/UJAwJJ8DghI/AAAAAAAAGw4/OQZgPqCIw8s/s640/WP_000986.jpg)
(https://lh3.googleusercontent.com/-kpXOrujLV08/UJAwJIcymTI/AAAAAAAAGw8/MWa7p8fR6q0/s640/WP_000989.jpg)
The other 2 is in the technical section, many thanks again Barry. ;)
-
Great that the Hyper Sports works! Enjoy it Belike :)
Thanks for posting the pics!
-
:spaceace: :spaceace: :spaceace: