Dragon's Lair Fans - Arcade Lifestyle
General Chat => Artwork => Topic started by: Etienne MacGyver on January 27, 2012, 03:20:22 PM
-
Okay, because i am not busy enough yet, lets make a start with the vector from Hard drivin's tailgate 8)
ill start with my favorite part... Halftone.... NOT! :twisted:
Better try to find me a easy way..
After some fooling around with overal distances between the dots i got a little line that has exactly the same distance:
(http://www.opdenkelder.com/pics/hd/02.jpg)
place a copy on the calculated line above... so far so good.. ::)
(http://www.opdenkelder.com/pics/hd/01.jpg)
and press [CTRL-D] a many times as you need dots.. :D
(http://www.opdenkelder.com/pics/hd/03.jpg)
i think this is just enough for the part of the exhaust pipe that i want to start..
(http://www.opdenkelder.com/pics/hd/04.jpg)
in position after rotating it a bit and copy-ing some more dots in "wireframe" mode...
[analmode on:]
i rotated them a bit to match the original dot pattern..
[analmode off:]
(http://www.opdenkelder.com/pics/hd/05.jpg)
And back to normal mode..
(http://www.opdenkelder.com/pics/hd/06.jpg)
i think thats enough dots to create that part..
(http://www.opdenkelder.com/pics/hd/07.jpg)
more later when i got time again.. 8)
-
There I was....thinking this would be a piece of cake art for our vector master. From a distance it looks so simple ! Just a couple of lines I thought.... :oops:
-
hehe, yeah it always looks more easy than it is in the end ;D
but we will get there ;)
-
Thankfully you can copy half of it....;)
-
Does anyone need an exhaustpipe ? ;D
-
:oops: 5,5 months later...
A little update !
Rebuilded the second pipe, and combined it with the first pipe i did.
Next up find some time for the rest :? :D