Dragon's Lair Fans - Arcade Lifestyle
General Chat => Artwork => Topic started by: eurotronic on September 22, 2011, 03:31:24 PM
-
Hi guys,
i designed a couple of decals to stick on the jamma connector.
Though this can interest some of you.
It look like this: ;)
(http://i49.servimg.com/u/f49/16/19/20/12/imgp1610.jpg)
Here is the file:
JAMMA pinout decals for connector (http://www.opdenkelder.com/pics/decaljamma.jpg)
Red numbers and letters go to PCB edge.
:spaceace:
-
Very useful stuff, thanks for the link. ;)
-
Very useful stuff, thanks for the link. ;)
what a timing ;)
Very cool !, thanks eurotronic! :spaceace:
ps if you want that i host the file, read your PM ;)
-
great addition thanks ! ;D
-
I couldn't download it:
"The file you are trying to access is temporarily unavailable. Please try again later." :-\
-
permission asked to add it to vectorlib (http://vectorlib.free.fr). in the sticker section (http://vectorlib2.free.fr/stickers).
can I ??
-
sure, no problemo. :)
-
I couldn't download it:
"The file you are trying to access is temporarily unavailable. Please try again later." :-\
Try the link again ;)
-
I was planning to do a T-shirt design with a Jamma pinout but your sticker idea is MUCH more useful!
Thanks for sharing!
-
I couldn't download it:
"The file you are trying to access is temporarily unavailable. Please try again later." :-\
Try the link again ;)
Much better now, thanks. ;)
Can you adjust it to the correct size? :oops:
-
dimentions please ::)
(dont have a jamma connector here...)
-
I still have some Jamma loom with japanese (or chinese) indication on it... your sticker will be very useful, thanks for sharing it :)
:spaceace:
-
Yep...very handy.
-
dimentions please ::)
(dont have a jamma connector here...)
That "stickin''' part is aprox. 11,8X1,5 cm. ;)
-
click me.... (http://www.opdenkelder.com/pics/decaljamma.pdf) ;)
Later i might retype it, then the filesize is smaller 8)
-
click me.... (http://www.opdenkelder.com/pics/decaljamma.pdf) ;)
Excellent! :)
-
What is HP+/- ???
Audio is supposed to be on pins 10/L instead of 11/M ???
-
HP is Speaker (Haut Parleur). Sorry, i wrote this one in french..
Audio+- is for unamplified audio (rarely used).
Will change that tommorow. ;)
-
Ok it's edited.
Etienne, can you put this one on your sever and erase the old one?
http://www.megaupload.com/?d=Q65QGE7O (http://www.megaupload.com/?d=Q65QGE7O)
Thx :)
-
Both files are updated with this version ;)
-
Thx friend :D
-
thanks for sharing, really useful!
-
HP is Speaker (Haut Parleur). Sorry, i wrote this one in french..
Audio+- is for unamplified audio (rarely used).
Will change that tommorow. ;)
Mmmm, could that be the reason I'm not getting any sound from the 48in1 in my Puckman....?
-
if you connected the speaker to the wrong pins, that could be very weel the problem... ;D
does other jamma boards produce sound in that cab ?
-
I have retyped it in AI and saved the PDF with the correct sizes..
the file has been replaced, and it only 300 KB now ;)
Grab it here:
www.opdenkelder.com/pics/decaljamma.pdf (http://www.opdenkelder.com/pics/decaljamma.pdf)
-
file alos hosted on vectorlib:
see http://vectorlib2.free.fr/stickers/#decaljamma
many thanks for both of you
-
I have printed them with the alusticker reprorun, and today i found a moment to attach one on my jamma connector:
Fit exactly..
Solder side :
(http://www.opdenkelder.com/pics/jamma1.jpg)
Component side:
(http://www.opdenkelder.com/pics/jamma2.jpg)
I have 4 sets left, for only shipping costs they can be yours ;)
-
And the new owner is Bencao74 ;)
I dont have them anymore now, but i will call them #16 Jamma Edge connector Decal in the Alusticker runs, so if you want some, just let me know, and ill take it along with the next run.
-
Great quality. I received them yesterday. I tempted to put them in my shop :)
-
Feel free to sell those.
I am in the middle of a new batch of aluminium stickers so if you need i can provide more.
although they are not free then ;)
-
f***, destroys the good deal :) will get back to you.