Dragon's Lair Fans - Arcade Lifestyle
General Chat => Artwork => Topic started by: Etienne MacGyver on May 15, 2011, 04:28:07 PM
-
Bruno, this is my todo list / status page for vector work, can you make this "sticky" ?
If there is something not here that i have said to anyone of you to do, please feel free to remind me here so i can add it to this list, there are so many little thingies to make, so i kinda lose track of it, and i like to keep my word to everyone i say i will do some vectorwork for.
The "Todo" list :
Zaccaria Money Money CPO: Status: Waiting in line
Space Ace Sidam artwork (CPO and marquee) Matteo: Status: Waiting in line
Starhawk for Speleo: Status: Waiting in line
Euro Joust Marquee: Status, Started, but have found a much higher resolution source, so i need to start over from scatch for the best result
Vindicators Sideart: scan downloaded, measurements present, Status: waiting in lineMikonos is working on it but does not want to share it
Zaxxon Sideart: Status: Mikonos did it but does not want to share it
Zaccaria Comidar CPO: scan downloaded, Status: waiting in line
The "WIP" list :
Jungle King Bezel: Status: WIP - Almost finished waiting scan to start from scratch ;D
Carnival Side Art: Status: Waiting Dimentions - Almost finished
The "Done" list:
Zaccaria Quasar CPO: started by me, finished by Aioros
"The Alusticker repro run"
Jamma Connector sticker (http://www.opdenkelder.com/pics/decaljamma.pdf)
Misc. coinrejector inserts (http://www.opdenkelder.com/pics/coin/coininserts.pdf)
Zaccaria Money Money / Jackrabbit bezel (https://www.dragonslairfans.com/smfor/index.php?topic=2823.msg37294#msg37294)
Moon Cresta cocktail instruction card (nichibutsu) (http://vectorlib.free.fr/MoonCresta/)
Starwars Return of the Jedi Yoke Overlay (http://vectorlib.free.fr/StarWars/#yoke_rotj_overlay_by_Etienne)
Armor Attack CPO (http://vectorlib.free.fr/ArmorAttack/)
A Yet to reveal mistery Project For Ully ::)
Stern Coindoor Decal (http://vectorlib2.free.fr/Arcade_Logos/#Stern)
Two Zaccaria Logo's (http://vectorlib2.free.fr/Arcade_Logos/#zaccarialogo_by_Etienne)
Crazy Kong CPO (http://vectorlib.free.fr/CrazyKong/)
DeathRace Instructions part Bezel (http://vectorlib.free.fr/DeathRace/)
Super Cobra temp CPO Instruction card (Zaccaria Scramble) (http://vectorlib.free.fr/Scramble/)
The Ultimate Solution (http://vectorlib2.free.fr/stickers/#Ultimate-Solution)
Galaxian Custom instructioncard (http://vectorlib.free.fr/Galaxian/#Galaxian-Custom-instructioncard)
Galaxian bezel & Marquee Bertolino (http://vectorlib.free.fr/Galaxian_Namco/#Galaxian-bezel-Bertolino-by-Etienne)
RoadBlasters Topper (http://vectorlib.free.fr/RoadBlaster/#RoadBlasters_Topper_by_Etienne)
Super Don Quix-ote Euro Marquee (http://vectorlib.free.fr/SuperDonQuix/#MarqueeSuperDonQuix-oteEuro)
Zaccaria CoinDoor CoinRejector Instructions vector from repro (http://vectorlib2.free.fr/stickers/#Zaccaria-CoinDoor-CoinRejector-vector-from-repro-by-etienne)
Zaccaria High Voltage Warning (http://vectorlib2.free.fr/stickers/#zaccaria-warning)
Atari Player on Board (http://vectorlib2.free.fr/Misc/#atari_player_on_board_final)
Baby pacman onboard (http://www.opdenkelder.com/pics/babypac/Baby-pacman-onboard.pdf)
ikaruga logo (http://www.opdenkelder.com/pics/ikaruga.pdf)
Atari Andre (https://www.dragonslairfans.com/smfor/index.php?topic=2351.msg28800#msg28800)
VAN Logo (https://www.dragonslairfans.com/smfor/index.php?topic=2351.msg29215#msg29215)
-
Done ;)
When I'll have access to my Zaxxon cabinet, and scan the sides, I'll ask you to put that one on the list ::) :P ;)
Many thanks for your great works already done on previous artworks :)
:spaceace: :spaceace: :spaceace:
-
Thanks Bruno !
ps, i have editted the first post ;)
Many thanks for your great works already done on previous artworks :)
Which gives me in idea to make a start with the integration of the vectorlib from zorg and my previous done vectors..
I'll create in the list a part that is done too and make a link to the file 8)
-
! - all the above is the reason why i´m on this Forum 2-∞ times a day!!!! :spaceace: :spaceace: :spaceace: :spaceace:
-
Did you tell anything to your wife about this topic? ;D ;D ;D
-
Did you tell anything to your wife about this topic? ;D ;D ;D
LOL !
As a matter of fact, she just asked me to take a "pause" to come to dinner :D
-
:spaceace: :spaceace: :spaceace: :spaceace: :spaceace:
You are doing some really great work Etienne. Very cool of you.
-
I have updated the first post so its complete and up to date until now..
-
Hey, isn't that Atari Andre one private ;)
-
Hey, isn't that Atari Andre one private ;)
Yes it is , thats why there is no link to the vector ;)
-
Armor Attack CPO has moved to the top,
WIP (https://www.dragonslairfans.com/smfor/index.php?topic=2606.msg34232#msg34232) ;)
-
Armor Attack CPO has moved to the top,
WIP ;)
Absolutely cool, I am watching this space.
Let me ask if you may want to finish sideart/kickplate artwork for Starhawk (from Vectorbeam)?
I have the scans stitched and a friend in France has done some significant work on the sideart in AI already but no more time for that since some time.
So ... just a question. I realize there are not many with missing sideart for that machine ;-)
-
Sure, i can take a look ;)
I dont know exactly when i have time, but i can put it in "the vector que tm" ::)
Do you have space to dump the files you got, or do you want me to create an FTP account here at my server ?
but first let me finish the CPO 8)
-
.
Do you have space to dump the files you got, or do you want me to create an FTP account here at my server ?
.
I have enough space. Will wait for sure.
-
And the CPO is finished (https://www.dragonslairfans.com/smfor/index.php?topic=2606.msg34283#msg34283) 8)
so post the link to the other package (starhawk) here or in PM ;)
-
Hi,
uploaded the 'package' to here:
http://www.andysarcade.de/download/Starhawk-Artwork.zip (http://www.andysarcade.de/download/Starhawk-Artwork.zip) !!! 25MByte
Best Regards,
Andreas
-
Next up in line is the ROTJ Yoke Overlay (https://www.dragonslairfans.com/smfor/index.php?topic=494.msg33287#msg33287)
the worst part is done.. the Halftone... :twisted:
(http://www.opdenkelder.com/pics/rotjyoke/rotj1.jpg)
We will continue here: (https://www.dragonslairfans.com/smfor/index.php?topic=2666.0) ;)
-
Hi,
uploaded the 'package' to here:
http://www.andysarcade.de/download/Starhawk-Artwork.zip (http://www.andysarcade.de/download/Starhawk-Artwork.zip) !!! 25MByte
Best Regards,
Andreas
package downloaded...
Added it to the que.. ;)
-
ROTJ Yoke is ready.
-
ROTJ Yoke is ready.
Yes, right here ;) :arrow:
(https://www.dragonslairfans.com/news/return_of_the_jedi_yoke_overlay.jpg) (https://www.dragonslairfans.com/smfor/index.php?topic=2666.0)
:spaceace: :spaceace: :spaceace:
-
Changed the first post for the order,
Time to start another 8)
Moon Cresta Instruction card has entered the WIP line ;)
Let's Continue Here (https://www.dragonslairfans.com/smfor/index.php?topic=2684.msg35556#msg35556) :P
-
Rumor has it that Etienne is really not from this world, but from another planet. His speed is unearthly ;D ;D ;D
-
dunno if you have seen this.... got it from the KLOV forum...
(http://www.thisoldgame.com/Pics/AtariCDsheet.jpg)
-
yeah, i saw that, i believe its this post:
http://forums.arcade-museum.com/showthread.php?t=64809
but this pic is not good enough to make a repro from, and i dont have any measures...
I have send the man from that post a PM, maybe he still has the hires scan that he was talking about...
do you need any of those michael ?
and are they aluminium, or just normal stickers ?
-
No, dont need any of them (atm) but i just thought that you might be interested...
And im sure the font is the same???
-
the font looks the same, helvetica
-
I have send the man from that post a PM, maybe he still has the hires scan that he was talking about...
Got a response, and it looks like he did not transfer that file when he migrated to his new pc he says :-\
-
received a highres scan from zorg :P
Thanks Eric !
-
I would like to put the Phoenix instruction card to the que, I really like Falco, but he has to go from my cpo. ;D
(https://lh4.googleusercontent.com/-h4bO8Jf8CoQ/TsUF0B5WmPI/AAAAAAAAFAM/HyybQEFksMw/s800/img197.jpg)
Thanks in advance Etienne. ;)
-
Do you have a bigger / higher res source ?
Thanks !
-
I made some pics with my camera, but I can't upload it to your FTP, password problems. :-\
-
Thats correct...
I have reinstalled my server ;D
You got PM soon ;)
-
Thanks to Paul, finally I could put my hands on a Fitter cpo scan and thanks to Etienne, he made the the tricky stitch, so I can show it here. :D
(https://lh5.googleusercontent.com/-BELttOme2gg/UFCInHxIutI/AAAAAAAAGeQ/EzzoFV8x3LY/s912/fitter.jpg)
-
A Yet to reveal mistery Project For Ully ::)
How about this guys ? ;)
A while ago in februari i started this little project because a good friend of me asked me if i could help him out.
Soon available in vector when i finish it...
and i already did some "hobby-ing" too..
http://www.youtube.com/watch?v=_QpXi3IuxHU (http://www.youtube.com/watch?v=_QpXi3IuxHU)
http://www.youtube.com/watch?v=mQvyrJcAmIs (http://www.youtube.com/watch?v=mQvyrJcAmIs)
This??
(http://farm8.staticflickr.com/7029/6595778289_499d31ebf6_z.jpg)
(http://www.andysarcade.net/personal/tech/MC/MC20pic.jpg)
-
Boy are you a
spoiler sherlock ;D ;D ;D ;D ;D
but i will finish your investigation ;)
http://vectorlib.free.fr/MissileCommand/vect/Missile_Command_Topper_by_Etienne.pdf
and dont forget to watch these :
http://www.youtube.com/watch?v=_QpXi3IuxHU
http://www.youtube.com/watch?v=mQvyrJcAmIs
-
Hehe, yep. Though, I read some where that there was a rom on the main pcb that controlled the lights in the topper, and it was disconnected when MC was shipped... I think it was pman on ukvac that discovered this...
-
That could be very interesting info for Ully's plan...
maybe he should contact that dude, to see if its possible to create a "Original" setup
-
Anyone happen to have a vector file for a Euro Joust screen Bezel ? All I can find on the web is the top one. Could be doing with one to get started on the project cab I have ? Was hoping to have it ready for Play Expo in October.
-
at the moment i only have this raster file..
Image Details: 8864h x 9752w, 400dpi, 11.52MB
Let me see if i got some spare time soon, then i can vector it.
it does not look too hard to vector this..
The font for the instructions is "Hobo"
-
If you could vector it I would be forever in your debt. Muddymusic on J+ has found someone to do reverse printing on perspex / plexi. So unless anyone else has a cheaper option lol.
http://www.jammaplus.co.uk/forum/forum_posts.asp?TID=52647&title=interest-check-perspex-printing-service
-
made a start ;) ;D
-
Perhaps i need to make a vector - raster combi..
this part is a "B1t(h" to vector.... :-\
-
easy work done. the instructionsheet:
-
I see that the version i am now vectoring is the US version..
Lets see them in comparison:
The Euro Joust :
(http://www.opdenkelder.com/pics/eurocade/2012/Saturday/machines/SAM_1007.jpg)
The US Joust:
(https://www.dragonslairfans.com/smfor/index.php?action=dlattach;topic=2635.0;attach=4298;image)
Looks almost the same, i guess its fine like the US, and i only need to change the instructions part..
EDIT:
The flames in the bottom are also mirrored, and the flame on the right side is lower than the US :-\
I bet that the size is also different as i think the eurocabinet is less wide than the US version, or am i wrong ?
I can try to ask Level42 if i can scan his bezel, that is a Euro bezel..
Or is there anyone else out here that has a Eurojoust Bezel and is willing to scan that for me / Bomjac ?
-
I actually have a Bezel of sorts - It is clear plastic with a vinyl (loose but with no self-adhesive) to go behind it - Perhaps I should just roll it up and mail it to you when I get home 12th August ?
Not sure pf the bezel origins. Will try to upload a picture later. Edit - It seems I have the US type bezel, so no use there.
Someone has tried to Jamma it (not completed), so the next question is whether to rewire it as original and go with the original boards or to just use the quick and easy way of Jamma and stick a JROK in for Play Expo.
-
I would go for Jrok, remember its no emulation so it rins exactly the same as the Original, but with more reliability and option to play some other Williams games as well ..
I'll try to call Andre, but i heard he was pretty busy with the maching band.
Anyway, soon i will see him in person soon and ask him then.
-
Did you ever get the joust bezel finished ?
Muddymusic is ready for another run, and I am keen to get a bezel and marque done this time round.
-
Nope, i need to visit him and maybe i can scan his bezel then if he permits me to and want to remove the bezel from the cabinet
-
Bruno, this is my todo list / status page for vector work, can you make this "sticky" ?
If there is something not here that i have said to anyone of you to do, please feel free to remind me here so i can add it to this list, there are so many little thingies to make, so i kinda lose track of it, and i like to keep my word to everyone i say i will do some vectorwork for.
The "Todo" list :
Space Ace Sidam artwork (CPO and marquee) Matteo: Status: Waiting in line
Tell me if you want a scan of the Space Ace of the Space Ace from the Atari-Plant in Irland
-
I have a highres scan, the only thing missing is time :P