Dragon's Lair Fans - Arcade Lifestyle
General Chat => Arcade Lifestyle => Topic started by: level42 on September 12, 2010, 10:08:08 PM
-
Since I plan on converting my MB into a DK I will have to also replace the CP.
The MB CP is all metal. We all know that the DK is wood, and from what I've seen it's simply a plank and not much more. Am I right, or are there any ridges or special edges I would have to router ?
-
It is indeed just a plank of wood. Here are some pictures, maybe they will help.
Overall
(http://img337.imageshack.us/img337/5899/imag3064.jpg)
ridge for the t-molding
(http://img710.imageshack.us/img710/3853/imag3066.jpg)
Some 'cut out' at the back which slides under the monitor side.
I could measure it if needed
(http://img153.imageshack.us/img153/6135/imag3063.jpg)
The joystick 'cut out'
(http://img256.imageshack.us/img256/4393/imag3067.jpg)
-
Thanks !!
That's too much routing etc. for my taste. I just saw that even Scr33n used a real one.....
Going to look for one...
-
I have an extra one if you are interested, but its way over here... :)
-
where is way over here located ???
-
where is way over here located ???
Level42 knows... :)
... Seattle, WA
-
Barry, that would be brilliant !!!!
I'll drop you a mail/PM.
-
Barry, that would be brilliant !!!!
I'll drop you a mail/PM.
Sounds good.