Dragon's Lair Fans - Arcade Lifestyle
General Chat => Technical Area => Topic started by: DarthNuno on May 27, 2015, 04:32:00 PM
-
Well, I need to identify the four wires coming from this HITACHI CRT tube ref 510UJB22 :arrow:
(https://www.dragonslairfans.com/forforum3/g0719a-1.jpg)
I know these four wires are used for the X/Y deflection...
(https://www.dragonslairfans.com/forforum3/g0719a-2.jpg)
...but I really need to figure out what's what here ( H+ H- V+ V-) ??? :arrow:
(https://www.dragonslairfans.com/forforum3/g0719a-3.jpg)
This tube was connected to an Electrohome G07CB0 chassis (not working anymore), like this :arrow:
(https://www.dragonslairfans.com/forforum3/g0719a-4.jpg)
In the chassis manual (full version here (https://archive.org/stream/ArcadeGameManualG07/g07#page/n11/mode/2up), I can spot the Q1, Q3, Q4 & Q5 where these fours wires are plugged, but still can't tell which ones are for what? :arrow:
(https://www.dragonslairfans.com/forforum3/g0719a-5.jpg)
I plan to use an brand new 'generic' chassis, but I would like to connect it to the Hitachi CRT tube previously used with the now broken G07CB0 chassis.
Any idea how to figure out what exactly are these four wires? :-[
-
Look here:
http://arcadecontrols.com/BBBB/yoke.html
the upper pic
-
Measure the resistance between them, the lower value is horizontal, the higher is vertical.
-
Look here:
http://arcadecontrols.com/BBBB/yoke.html
the upper pic
Wow, great link... the answers are clear, thanks! :-*
:spaceace: