Dragon's Lair Fans - Arcade Lifestyle
General Chat => Artwork => Topic started by: DarthNuno on October 13, 2014, 09:59:56 PM
-
I'm looking for the Space Invaders part II cocktail control panel overlay reproduction.
Does this CPO is available somewhere? :arrow:
-
i am tying to vectorized it for my cocktail but i am not as good as it thought for it .
i found that on internet
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20141013223253-kos71-Space-invader-Cocktail-CPO-2.psd.jpg.jpg) (http://gamoovernet.pixhotel.fr/pics/20141013223253-kos71-Space-invader-Cocktail-CPO-2.psd.jpg.jpg)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20141013223310-kos71-Space-invader-Cocktail-JP-CPO-1.psd.jpg.jpg) (http://gamoovernet.pixhotel.fr/pics/20141013223310-kos71-Space-invader-Cocktail-JP-CPO-1.psd.jpg.jpg)
In the alibaba cave we found , there is some taito with such panel perhaps we will have spare parts .
I ll keep you informed
-
If you are still interested I could make the vector, it seems quite fast...
-
In the alibaba cave we found , there is some taito with such panel perhaps we will have spare parts .
I ll keep you informed
Ah yes, that would be great. I'm just looking for a 'OK condition' one ;)
If you are still interested I could make the vector, it seems quite fast...
Of course, in case kos71 can't find one, but also this will make it available for the community :)
-
+1 for the vecto for the community if it fast for you ::) . It took me 6 hours for an average result . I am so bad a inkscape
-
Looking at the picture, it looks like its printed on alu.
If you like me to take it in the alurun, provide me the file and i'll see what i can do for you ;)
-
ok start with the vectorization!!! ;D
-
ok start with the vectorization!!! ;D
:spaceace: :spaceace: :spaceace:
Looking at the picture, it looks like its printed on alu.
If you like me to take it in the alurun, provide me the file and i'll see what i can do for you ;)
:spaceace: :spaceace: :spaceace:
-
thanks dude
-
Just spotted these, any good?
http://www.ebay.co.uk/itm/Taito-Cocktail-Table-Space-Invaders-Part-2-Control-Panel-Fronts-/311126256236?pt=UK_Video_Games_Coin_Operated_MJ&hash=item487091ea6c
-
Hello Guys I finished the Cpo, now I need these measures if possible...
Cheers!!!
-
Hello Guys I finished the Cpo, now I need these measures if possible...
Cheers!!!
Great, I will provide you this tomorrow evening :)
-
And here we are, guys.
Let's say 30 cm per 10cm, see :arrow:
-
I attach some measures that would need to be verified ... also the measures of the slot for the control and position.
-
Your measures are accurate enough. I mean I can spot small differences with mine, due to the fact the print is not exactly aligned with the metal plate. I've just scan mine to show you that fact. For example your 'R' measure on top left is 4,5 mm on top left and almost 6mm on down left. I'm sure there's no 2 CPO 'out of factory' printed the same! ;D
So as I said, the overall measures are accurate enough. For me it's ready to print 'as is'. Oh, and please do not pre-cut the buttons/joystick on the file.
Well done for that job! Now I'm gonna talk to Etienne! ;D
:spaceace: :spaceace: :spaceace:
-
OK !!
Here is the finished work I put the file for cutting aluminum...
if you see any changes to make send me an email
-
Looking at the vectors i received, they are the english version, and in the beginning of this thread there are japanese too
however the picture of Bruno's looks like a mix of them, the players are in japanese, but the control is text ?
strange..
anyway, Spinhacker, do you think you can adjust your file to have them matched to the pics of bruno ?
That would give him the best reproduction i can do for him.
Thanks !
-
Looking at the vectors i received, they are the english version, and in the beginning of this thread there are japanese too
however the picture of Bruno's looks like a mix of them, the players are in japanese, but the control is text ?
strange..
anyway, Spinhacker, do you think you can adjust your file to have them matched to the pics of bruno ?
That would give him the best reproduction i can do for him.
Thanks !
Sure!!!
I did as you asked for you, all the white parts are transparent
-
Super! then i can print them in the alurun, which i am now processing.
Thanks a lot man !
-
I have added 5mm to each side, so after applying you can cut that off like so :
(http://www.opdenkelder.com/pics/minipong/98.jpg)
as you can also see, i am about to finish up the files, so soon they will go to the printers ;) :P
-
Hm, there must be a lot of cut lines. ::)
-
Hm, there must be a lot of cut lines. ::)
i dont want to think about that yet :-\ :D
-
I have added 5mm to each side, so after applying you can cut that off like so :
(http://www.opdenkelder.com/pics/minipong/98.jpg)
as you can also see, i am about to finish up the files, so soon they will go to the printers ;) :P
Great!!!! :spaceace: :spaceace:
-
i was on rt this weekend and I took some pictures of the cocktail i was mentionning at the beginning of this thread .
I got a surprise . Indeed in the dark of the attic it is difficult to see it but I took a picture of the cpo and it is written SNK instead of taito .
it is weird .
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20141118184110-kos71-33.jpg) (http://gamoovernet.pixhotel.fr/pics/20141118184110-kos71-33.jpg)
(http://gamoovernet.pixhotel.fr/pics_gamoovernet690px/20141118184127-kos71-34.jpg) (http://gamoovernet.pixhotel.fr/pics/20141118184127-kos71-34.jpg)
how is it possible it looks like the taito SI but with SNK on it . Someone know anything about it .