Dragon's Lair Fans - Arcade Lifestyle

General Chat => Technical Area => Topic started by: anunaki on February 18, 2014, 10:57:28 PM

Title: Donkey Kong cardboard bezel
Post by: anunaki on February 18, 2014, 10:57:28 PM

Hi guys,

I need a black cardboard bezel for my DK cab. I probably have to make one myself, So I'm looking for some measurements.

Been looking all over the internet, but I can't find these.

So I turn to you my friends, can you please help me out here.

Thanks in advance,

Patrick

Title: Re: Donkey Kong cardboard bezel
Post by: joeks on February 19, 2014, 08:58:48 AM

Hi Patrick,

If I can find mine amongst my stores DK cabinet parts
I can measure it tonight if that's soon enough.

-Barry

Title: Re: Donkey Kong cardboard bezel
Post by: anunaki on February 19, 2014, 09:07:07 AM

That would be great Barry :) Could you make a pic of it too so I have a visual?

Is there also a piece of plastic involved?

Title: Re: Donkey Kong cardboard bezel
Post by: Q*ris on February 19, 2014, 09:24:39 AM

On reply #9 there's a pic of André's Radar Scope with the plastic frame and cardboard bezel.
https://www.dragonslairfans.com/smfor/index.php?topic=1059.0 (https://www.dragonslairfans.com/smfor/index.php?topic=1059.0)

Title: Re: Donkey Kong cardboard bezel
Post by: anunaki on February 19, 2014, 09:30:38 AM

yeah, saw that

I need measurements of that too I guess

tx

Title: Re: Donkey Kong cardboard bezel
Post by: level42 on February 19, 2014, 10:23:36 AM

I'm not sure if that will work. DK has a different angle for mounting the monitor IIRC .....but I'm not even sure about that :P

Title: Re: Donkey Kong cardboard bezel
Post by: Q*ris on February 19, 2014, 11:01:11 AM

When it's done, if you want to add the cardboard that hangs from the ceiling of the cabinet to in back of the monitor, just search for Ninty Mullet on KLOV  ;)
http://forums.arcade-museum.com/showthread.php?t=97679&highlight=Ninty+Mullet (http://forums.arcade-museum.com/showthread.php?t=97679&highlight=Ninty+Mullet)
(but I guess you found that too already)

Title: Re: Donkey Kong cardboard bezel
Post by: anunaki on February 19, 2014, 12:15:21 PM

Yeah, that's for keeping the light out from the back I guess

thanks again, I rather see things twice then not at all :)

Title: Re: Donkey Kong cardboard bezel
Post by: anunaki on February 20, 2014, 10:33:54 PM

Did you measure it Barry?