Dragon's Lair Fans - Arcade Lifestyle

General Chat => Technical Area => Topic started by: Digimon on May 25, 2013, 08:31:01 PM

Title: Sega System X internal PCB cabling(Thunderblade and Afterburner)
Post by: Digimon on May 25, 2013, 08:31:01 PM

Hi gents,

today I wanted to place the new afterburner deluxe PCB in my non working Thunderblade cage.

to my surprise they don't have the same internal cabling;-(
I looked at vernimarks old photos of his PCBs and they look different from mine;-(

I thougt i only have to change the PCBs in the metal cage, but now I am not sure.

maybe someone can make a photo of a running PCB cabling?

here how the look like:

Thunderblade (non working) (maybe because of the cabling?)

(http://www.proe-wildfire.de/Zac/Machines/Thunderblade/PCB/small/WP_20130525_011_small.jpg)
(http://www.proe-wildfire.de/Zac/Machines/Thunderblade/PCB/small/WP_20130525_012_small.jpg)
(http://www.proe-wildfire.de/Zac/Machines/Thunderblade/PCB/small/WP_20130525_014_small.jpg)

Afterburner deluxe (should work) but I don't no how to cable it ;(
(http://www.proe-wildfire.de/Zac/Machines/Thunderblade/PCB/small/WP_20130525_007_small.jpg)
(http://www.proe-wildfire.de/Zac/Machines/Thunderblade/PCB/small/WP_20130525_008_small.jpg)
(http://www.proe-wildfire.de/Zac/Machines/Thunderblade/PCB/small/WP_20130525_009_small.jpg)

Title: Re: Sega System X internal PCB cabling(Thunderblade and Afterburner)
Post by: baritonomarchetto on May 27, 2013, 07:16:45 PM

Hi,

here are some shots of my working PCB  :)

Sorry for the "positions" i took my shots, but i cannot gain access from the rear of the machine being in a little room surrounded by other cabs... i had no choice but to take my shots from the front coin door   :-[

(http://imageshack.us/a/img825/7749/sam1567g.jpg)

(http://imageshack.us/a/img845/39/sam1568f.jpg)

(http://imageshack.us/a/img842/7655/sam1569f.jpg)

(http://imageshack.us/a/img22/426/sam1574n.jpg)

Title: Re: Sega System X internal PCB cabling(Thunderblade and Afterburner)
Post by: Digimon on May 27, 2013, 07:20:17 PM

thanks a lot for the pics!!!!

It's the thunderblade, isn't?

Title: Re: Sega System X internal PCB cabling(Thunderblade and Afterburner)
Post by: baritonomarchetto on May 27, 2013, 07:22:50 PM

Yes, it's the thunderblade  :)