Dragon's Lair Fans - Arcade Lifestyle

General Chat => Arcade Lifestyle => Topic started by: Laszo on August 14, 2012, 12:09:16 AM

Title: who recognizes this PCB
Post by: Laszo on August 14, 2012, 12:09:16 AM: I got this PCB and I want to find out what it is.
Title: Re: who recognizes this PCB
Post by: level42 on August 14, 2012, 12:31:44 AM: Mmmm, maybe Pac -like hardware ?

Not sure.

If you have an EPROM burner you could read and ID the ROM online....
Title: Re: who recognizes this PCB
Post by: Laschek on August 14, 2012, 09:20:37 AM: It has some slight similarity to a Phoenix board, at least the pinout seems to match (3 connected pins at the right hand side of the connector, let me guess that on the opposite side 4 pins are connected).
This pinout was used on a variety of boards, Phoenix, Crazy Kong, and many others, there might be some slight differences, use at your own risk: http://www.crazykong.com/pins/Phoenix.pin.txt
Title: Re: who recognizes this PCB
Post by: Laszo on August 18, 2012, 11:29:50 AM: Quote from: Laschek on August 14, 2012, 09:20:37 AM
It has some slight similarity to a Phoenix board, at least the pinout seems to match (3 connected pins at the right hand side of the connector, let me guess that on the opposite side 4 pins are connected).
This pinout was used on a variety of boards, Phoenix, Crazy Kong, and many others, there might be some slight differences, use at your own risk: http://www.crazykong.com/pins/Phoenix.pin.txt

Thanks for the support, I will check it out.... But not today because I have to get a machine up and running for Eurocade!
Title: Re: who recognizes this PCB
Post by: CrazyKongFan on September 01, 2012, 08:28:20 PM: It doesn't match the bootleg Phoenix board I have (I think it's labeled TIM-8001). Mine has 12 2716 EPROM's on one of the boards, and just TTL chips and stuff on the other board. It does use the Falcon pinout though, and works (without sound, probably a board issue, I got it untested) in my Crazy Kong cab, although the sync is off (might also be a board issue, as I can get it to lock in once in awhile)
Title: Re: who recognizes this PCB
Post by: Etienne MacGyver on September 02, 2012, 09:40:51 AM: you should have brought it with you to EC, i have tested some boards from psykick yesterday in my CrazyKong cabinet...