Dragon's Lair Fans - Arcade Lifestyle

General Chat => Technical Area => Topic started by: Keith Elliott on February 06, 2008, 04:15:05 AM

Title: DL/SA Player Problems
Post by: Keith Elliott on February 06, 2008, 04:15:05 AM

Hello all I need a little help here. I have 3 DL/SA board sets that I am trying to get working. I can get the boards to boot fine I get all the beeps and the score board zeros out like normal. I can put credits and start a game fine, but the boards don’t have any interaction with the LD player. I tried using a 1450 with a hitech card, and a ldv800 with a lasercon with the same results. All the boards are rev c, and all the dips are set correct. Any help would be great.

Thanks
Keith

Title: Re: DL/SA Player Problems
Post by: italiandoh on February 16, 2008, 04:39:56 PM

Check the laserdisc player cable from the boards to the Hi-Tech or LaserAce. Are you sure it's plugged in right and not backwards ? Please post a pic of your setup showing all the connections.
Also make sure the jumpers on the Hi-Tech or LaserAce are configured properly. Check their respective manuals.

Matteo

Title: Re: DL/SA Player Problems
Post by: Keith Elliott on February 20, 2008, 04:56:46 AM

Thanks for the reply. I got it worked out it, one of the dip banks was not working right.

Thanks,
Keith