Dragon's Lair Fans - Arcade Lifestyle
General Chat => Arcade Lifestyle => Topic started by: Muerto on February 11, 2010, 08:08:48 PM
-
I have been posting this on KLOV and on BYOAC, without any luck :-\ :-\ :-\
please help me in this impossible quest:
Can anyone help me with the measures for a cab like this, so i finally can get my GnG and GnG up and running...
im interested in the side of the cabinet - thats the measures i need, and the radius of the corners..:
(http://www.arcadefever.net/RESTOFMYCOLLECTION/GNG/DSCF0011__Small_.jpg)
(http://muerto.x10hosting.com/images/gng.png)
-
scr33n, you're michael's guy - help him!!!
-
does scr33n have a cab like this???
-
no, but he can get measures and build a replica of EVERYTHING!
-
agree!
-
I think you need Fred (arcadefever) (https://www.dragonslairfans.com/smfor/index.php?action=profile;u=74) he has a GnG as far as i know
-
My friend Luc in Belgium has an original machine as well, but I doubt he has time to take measures....
-
I think you need Fred (arcadefever) (https://www.dragonslairfans.com/smfor/index.php?action=profile;u=74) he has a GnG as far as i know
I have asked him the same question, but he has not answered, i think he´s extremely busy atm.... :(
-
My friend Luc in Belgium has an original machine as well, but I doubt he has time to take measures....
Force him... ;)
-
My friend Luc in Belgium has an original machine as well, but I doubt he has time to take measures....
Force him... ;)
you should buy him a case of zonderik (https://www.dragonslairfans.com/smfor/index.php?topic=904.msg7781#msg7781) ;)
-
I think you need Fred (arcadefever) (https://www.dragonslairfans.com/smfor/index.php?action=profile;u=74) he has a GnG as far as i know
I have asked him the same question, but he has not answered, i think he´s extremely busy atm.... :(
I saw that he replied today on bruno's qbert threat, so he is in DLF land again ;D
-
you've had ghouls n ghosts for a while now, you really need to play it.
where is fred these days?!?!? so busy.
-
you've had ghouls n ghosts for a while now, you really need to play it.
where is fred these days?!?!? so busy.
I know! - i need to make 2 cabs before i run out of space!
-
I know! - i need to make 2 cabs before i run out of space!
Should not be a problem for you , if i remember correctly you are a carpenter right ?
-
no, but he can get measures and build a replica of EVERYTHING!
;D ;)
Remember :arrow:
Galaga - plans from Jakobud and Bruno's help (measures and adjustment)
Pac-man - as above
Donkey Kong - as above
Track & Filed - using sidearts and Bruno's help (with his Centuri Gyruss cab)
Tempest - using sidearts and ton of pics
Burgertime - ton of pics (sidearts) and Bruno's help
So .... first of all you need the profile of the cab ... I've not found yet :roll: :?
I think you need Fred (arcadefever) (https://www.dragonslairfans.com/smfor/index.php?action=profile;u=74) he has a GnG as far as i know
Yep ...
-
I have just sent a mail to a collector who owns that game. Let him few days to take the measures ;)
-
I have just sent a mail to a collector who owns that game. Let him few days to take the measures ;)
Thanks! :spaceace: - i´m really looking forward to this build!
-
You're lucky :) Already the details :arrow:
A : 183cm
B : 161,8 cm
C : 145 cm (middle of the curve)
D : 162,5 cm
E : 100 cm
G : 93 cm (begin of the curve)
H : 71 cm
I : 47,5 cm
J : 62,5 cm
K : 75,8 cm
Beware about your schema : it's curved at C an D.
Thanks to Povo for the details :-*
-
wow!!!! thanks a lot for your help Bruno! :-* :-* :-* :-* :-*
also pass my gratitude along to Povo!!! :spaceace: :spaceace: :spaceace:
-
10 minutes later, here´s the final result:
(http://muerto.x10hosting.com/images/arc/gngcabfin.png)
so i hope that next weekend i can cut the sides for both machines!
-
Weekend... Finally!!!
tomorrow i go cut the pieces for the two cabs!!!...??? wait!!! wtf!
arrrh, seems like they are _not_ identical!!!!!! damn, why did´nt i investigate that before!!!!
(note to self: You stupid f**k!)
as you can see on the photo the cabs are completely different!... argh!
Ghouls n Ghosts:
(http://www.quarterarcade.com/img/vol3/6977_6_fs.jpg)
and Ghosts n Goblins:
(http://www.arcadefever.net/RESTOFMYCOLLECTION/GNG/DSCF0011__Small_.jpg)
for the Ghouls i have a NOS CP, and for Ghosts i have CPO, Marquee and Bezel:
(http://muerto.x10hosting.com/images/arc/gngwhat2.jpg)
Bruno. i know it´s the 11th hour, but would you be able to get the CP details from your friend? (the way the steel is bend?)
i made this template fast so you can see how it´s bend...
(http://muerto.x10hosting.com/images/arc/gngcp.gif)
-
Was at the company at 1100 hrs today, so i could get the cab done.
Started to cut 2 pieces of MDF..:
(http://muerto.x10hosting.com/images/arc/gngcab16.jpg)
Found the drawing and begun to draw the side of the cab..
(http://muerto.x10hosting.com/images/arc/gngcab15.jpg)
For the curved corners i used a ...Passer, the Danish for it, don´t know the english word...
(http://muerto.x10hosting.com/images/arc/gngcab14.jpg)
Cut of the top with a circular saw
(http://muerto.x10hosting.com/images/arc/gngcab13.jpg)
And woila! one side finished...
(http://muerto.x10hosting.com/images/arc/gngcab12.jpg)
Placed the finished side at the bottom and took the last piece of MDF and placed it on top, and used a router for the cut:
(http://muerto.x10hosting.com/images/arc/gngcab11.jpg)
From the bottom
(http://muerto.x10hosting.com/images/arc/gngcab10.jpg)
Yes, two finished sides.
(http://muerto.x10hosting.com/images/arc/gngcab9.jpg)
Routed the trench for the T-Mold
(http://muerto.x10hosting.com/images/arc/gngcab8.jpg)
Made some lists for the cab assembly
(http://muerto.x10hosting.com/images/arc/gngcab7.jpg)
Assembling, under the lists i used glue for better support, and nailed the whole shabang together from the inside
(http://muerto.x10hosting.com/images/arc/gngcab6.jpg)
Finished routing the speaker holes..
(http://muerto.x10hosting.com/images/arc/gngcab5.jpg)
Final assembling
(http://muerto.x10hosting.com/images/arc/gngcab4.jpg)
Mounting Bezel supporting lists
(http://muerto.x10hosting.com/images/arc/gngcab3.jpg)
And, finally, finished
(http://muerto.x10hosting.com/images/arc/gngcab2.jpg)
And with Marquee and Bezel
(http://muerto.x10hosting.com/images/arc/gngcab1.jpg)
Tomorrow i will paint the inside black, and the room behind the marquee white...
-
And here's a new Scratch Build Master 8)
Great job so far, congratulation!
-
Wow! I'm impressed! It's looking very good so far. :)
-
For the curved corners i used a ...Passer, the Danish for it, don´t know the english word...
(http://muerto.x10hosting.com/images/arc/gngcab14.jpg)
Youre right , danish and dutch is not so different,
well at least for the passer part, thats exactly the same ;D
I think the english word is "compass"
by the way , good tools are always the key !
this post demonstrates that very clearly
Looking good Muerto !
oh and i forgot to mention, smart to use plywood as the bottom instead of MDF, Plywood can resist alot more than MDF
-
And here's a new Scratch Build Master 8)
Great job so far, congratulation!
hmm, still thinks that title belongs to scr33n ;)
If anybody have or know where to get the following items, please PM me!!!
Control Panel.
Upper and lower marquee bracket.
-
hmm, still thinks that title belongs to scr33n ;)
;D ;D :D
If anybody have or know where to get the following items, please PM me!!!
Control Panel.
Upper and lower marquee bracket.
Ask to Anthony (Quarterarcade) - nice guy - he'll help you for sure :spaceace:
Great job on scratch built - I am envy of your working machines :-* :-* :spaceace:
-
Ask to Anthony (Quarterarcade) - nice guy - he'll help you for sure :spaceace:
Thanks Scr33n ;)
Did you write him when you needed something or did he have the parts listed?
The reason i´m asking, is that atm. there´s no parts for Ghosts N Goblins :'(
-
Did you write him when you needed something
Yes, he'll try to look for the pieces .... You may also need a little luck :P
-
Just wrote to him, but he don´t have the parts :-[
-
Got up early to mount the TV and paint the cab..... here´s how it went down:
First was to disassemble the TV. 20"
(http://muerto.x10hosting.com/images/arc/gngcab212.jpg)
Marked up on a piece of 22mm plywood (for strength!)
(http://muerto.x10hosting.com/images/arc/gngcab211.jpg)
Frame assembled
(http://muerto.x10hosting.com/images/arc/gngcab210.jpg)
TV installed
(http://muerto.x10hosting.com/images/arc/gngcab29.jpg)
Waiting to go in the cab!
(http://muerto.x10hosting.com/images/arc/gngcab28.jpg)
Must admit, it very easy to work on a cab when you have a table like this:
(http://muerto.x10hosting.com/images/arc/gngcab27.jpg)
(http://muerto.x10hosting.com/images/arc/gngcab26.jpg)
Whooops! - to fast with the list´s that hold´s the back door, so had to cut some of it away...
(http://muerto.x10hosting.com/images/arc/gngcab25.jpg)
TV markup...
(http://muerto.x10hosting.com/images/arc/gngcab24.jpg)
from the other side..
(http://muerto.x10hosting.com/images/arc/gngcab23.jpg)
And yes! - Fits like a glove!
(http://muerto.x10hosting.com/images/arc/gngcab22.jpg)
Oh, hehe - nice paintjob!
(http://muerto.x10hosting.com/images/arc/gngcab21.jpg)
-
Woooww I love your monitor frame:
(http://img638.imageshack.us/img638/5559/gngcab28.jpg) (http://img638.imageshack.us/i/gngcab28.jpg/)
:-* :-*
Great job !!!
PS: You can try to scratch built the control panel .... :spaceace:
-
PS: You can try to scratch built the control panel .... :spaceace:
thanks :oops: :oops: :oops:
Actually, i thought of doing so, and i know a guy who have access to a steel press/cutter etc (basicly a iron workshop)
I think ill go there tomorrow, have to make a detailed drawing of he CP in CAD first....
-EDIT-
Will look something like this:
(http://www.opdenkelder.com/muerto/arc/gngcpdetail.png)
-
Great work Muerto :-*.
Otherwise, my girlfriend wants to know why you have chosen that cute TV to use in your project :pac:.
-
Great work Muerto :-*.
Otherwise, my girlfriend want to know why you have chosen that cute TV to use in your project :pac:.
Thanks! :)
hehe, i chose it because it was almost brand new ;) - and i have tested some PCB´s on it and the image was Tony approved!!!
(http://x1c.xanga.com/76a81065d6370238927076/z151584891.gif)
-
this could become a new gameshow:
"scr33n vs. muerto - battle of the scratch-built champions!" 8)
-
this could become a new gameshow:
"scr33n vs. muerto - battle of the scratch-built champions!" 8)
yeah , like discoverie's Biker build-off , but then "DLF's Arcade Build-off" :D
-
Great work Muerto :-*.
Otherwise, my girlfriend want to know why you have chosen that cute TV to use in your project :pac:.
I'm a fan of that TV too ;) So "70's design" in the shape :-*
what does 'REWLS' means by the way? ::)
Are you fine now with all the sizes?
Dawn! this project seems to be so quick... Impressive [Vader voice=on] 8)
-
what does 'REWLS' means by the way? ::)
REWLS was a word me and my danish friends invented, it means Rules (with a western accent!)
-
what does 'REWLS' means by the way? ::)
REWLS was a word me and my danish friends invented, it means Rules (with a western accent!)
;D Excellent ;D
-
Are you fine now with all the sizes?
Yes! - the sizes match perfect!!!! thanks!! (maby a mm here and there out of shape, but i don´t think you will be able to see it.. ;))
and as i wrote above, ill think i get the CP made at a friends metal workshop... :)
-
so amazing.
and look at that tv. feel a bit of a shame to dismantle it!!
-
note to self:
(http://muerto.x10hosting.com/images/arc/gngpinout.png)
-
once again, i need help.. :-[ :-[
I visited my friend at the iron works, but he was unable to bend a piece of steel that accurate :'( :'( :'(
so my only option is to get it bend, but not the way it should, or, someone set a CP for sale.....
please, if anybody sees or hears anything, please let me know.
-
almost finished painting..
(http://muerto.x10hosting.com/images/arc/painted.jpg)
-
hey, this is coming out nicely. did you spray the paint or roll it on? how's the finish? smooth?
-
Wery good work so far! Keep it up! :spaceace:
-
The paint is rolled on, it´s oil based, so it´s quite smooth..
-
Nice job !!! How many coats of paint?
-
2 layers, i will apply the 3rd shortly..
and FINALLY, finished soldering the edge connector, and hooked it up to the PCB.
Also, there´s some noice on the picture, but i haven´t connected the Video GND yet...
(http://muerto.x10hosting.com/images/arc/gngtv4.jpg)
Is there a way to ajust the picture on the scr33n... hehe
(http://muerto.x10hosting.com/images/arc/gngtv3.jpg)
[Vader voice=ON] Impressive [Vader voice=OFF] soldering skillz!.... not ;)
(http://muerto.x10hosting.com/images/arc/gngtv2.jpg)
Again, picture of the picture off center.... :'( :'( :'(
(http://muerto.x10hosting.com/images/arc/gngtv1.jpg)
-
starting to look good Muerto !
-
maybe there is a service mode to adjust the picture better.
http://www.eserviceinfo.com/index.php?what=search2&searchstring=FE2
as an example for FE2 chassis...
good luck
-
thanks! - how do i determine which chassis it is
the brand is LG..
-
Isn't there a model number on the case of the TV, or on the chassis itself?
Some TV's need a dedicated service remote to enter the service menu, and others need only a specific sequence of button presses on the normal remote.
The overscan and possibly the centering deffinately needs to be adjusted a bit on that TV - but it shouldn't be a problem, when first gaining access to the service menu.
-
Isn't there a model number on the case of the TV, or on the chassis itself?
Some TV's need a dedicated service remote to enter the service menu, and others need only a specific sequence of button presses on the normal remote.
The overscan and possibly the centering deffinately needs to be adjusted a bit on that TV - but it shouldn't be a problem, when first gaining access to the service menu.
Hey Mark! - and welcome to the (some say) greatest forum on the net!
Thanks for the info!!
Ill take a look at the Monitor later today, to see if there´s anything on there i can use...
-EDIT-
Here the pictures from the chassis:
Tube sticker
(http://muerto.x10hosting.com/images/arc/tv11.jpg)
Neck board
(http://muerto.x10hosting.com/images/arc/tv22.jpg)
Chassis
(http://muerto.x10hosting.com/images/arc/tv33.jpg)
-
wow, found something i can use, it seems like i have to press "OK" on the remote and TV buttons at the same time to access the Deflection adjustment menu.......
you´re here by Tony approved!
(http://www.fiftiesweb.com/pop/tony-new.gif)
-
YES! - got it working.... 8) - thanks to mark and funkychoice!
(http://muerto.x10hosting.com/images/arc/tvperfect.jpg)
So, now the only thing stopping the project to get finished is the damn CP!!! :'( :'( :'( :'(
-
So, now the only thing stopping the project to get finished is the damn CP!!! :'( :'( :'( :'(
i'm sure you've asked around on klov, right?
great to finally see that project coming together. i remember well when you told me last year "man, i wish i had one of those machines, i've got (almost) all the parts together, but i can't find the measures anywhere". look where you are now. i'm very happy for you - and of course GnG is a fabulous game!
-
i'm sure you've asked around on klov, right?
great to finally see that project coming together. i remember well when you told me last year "man, i wish i had one of those machines, i've got (almost) all the parts together, but i can't find the measures anywhere". look where you are now. i'm very happy for you - and of course GnG is a fabulous game!
Yes, i have asked on klov, and i think they a growing tired of me bumping the thread....
Yes! - it´s great to finally use the GnG PCB, i bought it 12-05-2008... so it has been laying around for some time now....
Here´s a pic of the paint on the front of the cab, there´s 2 layers on atm, so it need´s to be sanded one more time, before applying the final layer...
(http://www.opdenkelder.com/muerto/arc/gngpaint.jpg)
-
Hey Michael. Thought I would join this forum too, instead of just lurking around as an unregistered user.
Great you godt the TV Issue fixed. I did read about entering the service menu on a LG TV just requiring pressing either "menu" or "ok" on the TV and remote at the same time.
-
Hey Michael. Thought I would join this forum too, instead of just lurking around as an unregistered user.
Great you godt the TV Issue fixed. I did read about entering the service menu on a LG TV just requiring pressing either "menu" or "ok" on the TV and remote at the same time.
+1!
And got it working, thought the manual says "press OK on the remote and the TV", and there´s no OK button on the TV, so i figured it could be the MENU button - luckily it was :)
-
happy to see it worked...
-
any body knows what the right color of the buttons and joystick on the CP?? (Bruno?)
-
looks like yellow and red to me 8)
black for the player 1 and 2 button
stole the image from this (https://www.dragonslairfans.com/smfor/index.php?topic=904.0) threat
(http://gallery.me.com/andre.huijts/100498/DSCF3731/web.jpg?ver=12504877600001)
and another
(http://www.basementarcade.com/arcade/auction/a50/Gyruss%20and%20a%20nice%20ghosts%20and%20goblins.jpg)
-
hehe, thanks, but another setup....
Here´s the pics i had on my comp:
(http://muerto.x10hosting.com/images/arc/gng1.jpg)
(http://muerto.x10hosting.com/images/arc/gng4.jpg)
-
Got the cab home today..... horray!
I made a temporary CP, so i can have some fun while i search for one.... and still need to mount joy stick and buttons... ill do that tomorrow!
(http://muerto.x10hosting.com/images/arc/gngworks3.jpg)
applying the NOS side art, and i must say, it makes a huge difference when it was on!
(http://muerto.x10hosting.com/images/arc/gngworks2.jpg)
Up and running.... :shock:
(http://muerto.x10hosting.com/images/arc/gngworks1.jpg)
So, the Coin Door is under way, and the CP...... hmmmmm
-
Your scratch build CP doesnt look bad at all !
i think you dont see the difference if you apply some art...
maybe a temporary "copy" of the CPO ?
I can understand that you want a "real" CP , but this one looks perfect to me :P
Good JOB!
-
Thanks, i will paint the temp CP in the same color as the cab, so it wont be that noticeable.. - but im ready to give my right arm for a CP!!!
-
Colours are great ;D
-
this is looking wonderful, michael! i'm sure you'll get an original cp eventually. have you checked if any other games use the same kind of panel, like scr33n did with the super pac-man for his burgertime?
-
trust me, i have tried everything regarding the CP!
Though, found a company 10km from here that might be able to bend the CP, ill figure that out tomorrow...
-
hehe, thanks, but another setup....
Here´s the pics i had on my comp:
(http://muerto.x10hosting.com/images/arc/gng1.jpg)
This is the correct color buttons setup ;)
-
thanks Bruno! :spaceace:
-
can't get pass level 4 on this game. :'(
-
Thanks to liquidx, there´s now an original CP in the mail, on it´s way to Denmark!
Thanks!!!! :spaceace: :spaceace: :spaceace: :spaceace:
-
see! i knew you'd get one :spaceace:
-
Thanks to liquidx, there´s now an original CP in the mail, on it´s way to Denmark!
YESSS!!!! Nice :spaceace: :spaceace:
-
Got joystick and buttons hooked up yesterday, and it played flawless.
later yesterday i hooked up the speakers, and the sound worked 100%
but now, there´s no sound, is started to make some scratch noises and then disappearing all together, so now there´s only a faint "sssssss" in the speakers.... any idea why?? - have i fried a chip? (checked my soldering, and there´s nothing wrong with it...)
-
Just make an advanceMame PC conf, and you're done.
Plus, you will able to installe ghouls'n ghosts ;)
-
Just make an advanceMame PC conf, and you're done.
Plus, you will able to installe ghouls'n ghosts ;)
I think his avatar says it all :)
-
He pisses on Mame ?
How can we do that ?
The best freeware ever done ?
-
Got three days ago the latest Retro Gamer mag... and for the second time, GHOSTS'N'GOBLINS on cover :o :-* :-* :-* :arrow:
(https://www.dragonslairfans.com/forforum2/ghostsngoblins.jpg)
The first time they had put it on cover was for the issue 29 :arrow:
(http://imgs.inkfrog.com/pix/pompeyparsons/Picture_228_003.jpg)
:spaceace:
-
wow! sweet, can anybody make a high resolution scan so i can make a poster, that Ghouls n Ghosts is damn cool!!!! :spaceace:
-
check out the 'posters' section from the www.gamoover.net website, right here (http://www.gamoover.net/Forums/index.php?action=gallery;cat=54).
You'll find the files, provided by Zorg , 'poster size' print ready :-*
...included Ghosts'n'Goblins and Ghouls'n'Ghosts :
(http://www.gamoover.net/Forums/gallery/112_10_05_07_12_58_57.jpg)
(http://www.gamoover.net/Forums/gallery/112_10_05_07_1_01_08.jpg)
:-*
The source right here (http://www.gamoover.net/Forums/index.php?action=gallery;cat=54).
-
thanks Bruno! - i think i will dload both, and use the Ghouls n Ghosts on my next scratch build!
Oh, and the no sould on the PCB is solved, i had connected 2 speakers with a to low ohm number (4) which burned the amp on the PCB :'( :'( :'( i lerned it the hard way :'(
-
... i had connected 2 speakers with a to low ohm number (4) which burned the amp on the PCB :'( :'( :'( i lerned it the hard way :'(
It's crazy because... I know I don't have to do that too : I mean using speakers with wrong impedance value regarding the amp :? ... and in most of the cases : it works... and so I continue to do it... and your example prove that we cannot mix the value :-\
Well done for the fix. I presume you replaced the amp chip?
-
have got the schematic for the PCB, but haven´t had the time to check up on it yet.... Hard weekend....but fun!
(http://muerto.x10hosting.com/images/weekend.jpg)
-
wohooh! - received the CP and bracket today... need some TLC before applying the new CPO..
(http://muerto.x10hosting.com/images/arc/gngcp1.jpg)
(http://muerto.x10hosting.com/images/arc/gngcp2.jpg)
(http://muerto.x10hosting.com/images/arc/gngcp3.jpg)
Well, removed the old CPO, but it´s damn sticky, any product to remove the last glue residue?
Tried with acetone, without any luck..
(http://muerto.x10hosting.com/images/arc/gngcp4.jpg)
-
I use a product by MAPLINS in the UK called Label Remover in an aerosol can, it just melts the adhesive right off, great stuff. Any decent electronics store should have something like it.
(http://www.maplin.co.uk/images/full/n63an.jpg)
-
thanks! - just ordered a can!
-
have got the schematic for the PCB, but haven´t had the time to check up on it yet.... Hard weekend....but fun!
(http://muerto.x10hosting.com/images/weekend.jpg)
Woow! That what I call a party : dancing on tables? ;D
-
Yeah with 3 girls, no other boys in sight ;)
-
check out the 'posters' section from the www.gamoover.net website, right here (http://www.gamoover.net/Forums/index.php?action=gallery;cat=54).
You'll find the files, provided by Zorg , 'poster size' print ready :-*
I'm sorry, a bit off topic: Nice posters over there, but I have a problem. When I try to view f.i. Tron, I get an error message saying that it's not a valid psd file. This happens also with the others, except the SW poster and the Pac poster. Does anyone else has also issues viewing these posters?
-
Woow! That what I call a party : dancing on tables? ;D
Yes!, or in this case chairs... :lol: :lol:
Yeah with 3 girls, no other boys in sight ;)
Yes hehe 8) - though, the party were held in many different rooms in the apartment, but in sheer
awsomeness in seeing me dancing, they fled... :lol: :lol: :lol: :lol:
-
why u wearing a tam 'o' shanter???
-
why u wearing a tam 'o' shanter???
the theme of the party was "wear something on your head" :D
-
wohooh! - received the CP and bracket today... need some TLC before applying the new CPO..
(http://muerto.x10hosting.com/images/arc/gngcp2.jpg)
Hey ... arcadeboneyard ... I know very well this seller, very helpful for all my projects :-* :-* :spaceace:
-
you´re right, and the pictures of him burning various cabs is not fun to watch, though, not much i can do about it.. :'(
But, he had what i needed, so i´m happy :)
-
did a small video of the The Shed yesterday, where the GnG is running, amongst others......
http://www.youtube.com/watch?v=LMI5lGq8FWE
-
its prettymuch full uh ! , nice setup :pac:
-
Anyone know something about these games?:
http://cgi.ebay.de/Ghost-n-Goblins-Capcom-Arcade-Stick-NEW_W0QQitemZ370346981645QQcmdZViewItemQQptZde_entertainment_games?hash=item563a66790d (http://cgi.ebay.de/Ghost-n-Goblins-Capcom-Arcade-Stick-NEW_W0QQitemZ370346981645QQcmdZViewItemQQptZde_entertainment_games?hash=item563a66790d)
-
did a small video of the The Shed yesterday, where the GnG is running, amongst others......
http://www.youtube.com/watch?v=LMI5lGq8FWE
Nice video and great line up
Thanks!!!
-
did a small video of the The Shed yesterday, where the GnG is running, amongst others......
http://www.youtube.com/watch?v=LMI5lGq8FWE
Wow! I am almost speechless! Why visit Legoland and all those other places.. This is Denmark's greatest attraction! :) (At least for me. :oops:)
-
My best result in gng was that I managed to go to the endboss and beat him (you know, you have to restart one time the curse to level 1 after level 6) without continuing (though it was my last life when I arrived to satan's room)
This game is probably one of the most diffults arcade games ever made.
It's probably my favorite.
Can you build one for me ?
I have all the spare parts except the cab.
lol
Cheers, Mike.
-
Wow! I am almost speechless! Why visit Legoland and all those other places.. This is Denmark's greatest attraction! :) (At least for me. :oops:)
Hehe, all arcade freaks are most welcome in The Shed!
-
wow!!!! thanks a lot for your help Bruno! :-* :-* :-* :-* :-*
also pass my gratitude along to Povo!!! :spaceace: :spaceace: :spaceace:
POVO...
1. Reverse the name "POVO"
2. Minus 1 for each letter
3. The result is ? ::) ::) ::) 8)
(Easter egg for this topic (https://www.dragonslairfans.com/smfor/index.php?topic=1493.0)) ;)
-
:D
I have just posted in you GnG and MP topic, and i thought.... Hmmmmmm - maby thats why you got those measures so fast!
but, again, great catch bruno and again, thanks for helping me out!
Progress of the build atm:
I have received the CP, but havent got the time to do anything with it, as im working long hours atm on a bar i Odense, which has to open April 17. And of course it´s more importent that the public have a place where they can buy cheap (yes André!) bees and shots/drinks!