Dragon's Lair Fans - Arcade Lifestyle

General Chat => Artwork => Topic started by: DarthNuno on April 04, 2012, 07:53:59 PM

Title: [Vectorizing] Pleiads *IreCsa* metal plate logo
Post by: DarthNuno on April 04, 2012, 07:53:59 PM
Requested by Ully! Sounds like a new vector logo request?  ::) ;)  :arrow:
Title: Pleiads IreCsa metal plate logo
Post by: Superully on April 04, 2012, 08:31:47 PM
Quote from: DarthNuno on April 04, 2012, 07:53:59 PM
Requested by Ully! Sounds like a new vector logo request?  ::) ;)

definitely :P!

thx so much for the pic, bruno, but unfortunately i'd also need the text at the bottom of the plaque (and if possible a shot of the entire thing to get the spacing right). may i kindly ask you to get out your camera again?  :-*
Title: Pleiads IreCsa metal plate logo
Post by: DarthNuno on April 04, 2012, 08:32:48 PM
No problemo! Will do it tomorrow  ;)
Title: Pleiads IreCsa metal plate logo
Post by: DarthNuno on April 06, 2012, 06:10:44 PM
Here's an other shoot.
Hey, I didn't noticed so far the 'C' of ireCsa  :arrow:  :pac: :pac: :pac:
Title: Pleiads IreCsa metal plate logo
Post by: Superully on April 06, 2012, 06:16:08 PM
wonderful bruno, thx so much, i know you're extremely busy, but you found the time nevertheless!!! :spaceace:

ETIENNE? ;) ;D
Title: Pleiads IreCsa metal plate logo
Post by: Etienne MacGyver on April 06, 2012, 08:02:57 PM
Yes sir ?  :D
Title: Pleiads IreCsa metal plate logo
Post by: scr33n on April 06, 2012, 08:11:53 PM
Wooowww Etienne - faster than the speed of light !!!  :spaceace:
Title: Re: [Vectorizing] Pleiads *IreCsa* metal plate logo
Post by: Etienne MacGyver on December 14, 2012, 02:24:36 PM
And done  ;)

I adjusted the "gold" in the file i received, but i guess that its best printed on a brass plate and keep that part transparant...
Title: Re: [Vectorizing] Pleiads *IreCsa* metal plate logo
Post by: anunaki on December 14, 2012, 02:27:31 PM
How do you do this Etienne? With Illustrator??

This kind of stuff is amazing, is this printed on metal also?
Title: Re: [Vectorizing] Pleiads *IreCsa* metal plate logo
Post by: Belike on December 14, 2012, 02:35:53 PM
Looks very nice if you ask me. :spaceace:
Title: Re: [Vectorizing] Pleiads *IreCsa* metal plate logo
Post by: Etienne MacGyver on December 14, 2012, 03:04:26 PM
Quote from: anunaki on December 14, 2012, 02:27:31 PM
How do you do this Etienne? With Illustrator??

This kind of stuff is amazing, is this printed on metal also?

Yep , Illustrator it is.

This is not printed yet, i only adjusted the file that i have received from the midway coindoor
there was no Irecsa label on there, so i added / adjusted the missing parts  8)

Title: Re: [Vectorizing] Pleiads *IreCsa* metal plate logo
Post by: subzero1970 on January 10, 2013, 07:52:11 PM
cmon etienne - HOW DID YOU DO THAT??!!

i have illustrator but have no idea where to start :(
Title: Re: [Vectorizing] Pleiads *IreCsa* metal plate logo
Post by: Etienne MacGyver on January 10, 2013, 07:58:29 PM
I think you interpreted my explanation wrong, i mean by
Quote
i only adjusted the file that i have received from the midway coindoor
that i have adjusted the Vector file i received from Rich..

this is not an adjustment from a raster file, the raster file is just there as a refference....  ;)

The basics you can learn with some video's i have on my FTP
Download that, and you will understand the basics..

PM send  ;)

by the way, start always by searching here :
http://vectorlib.free.fr/

there may be the vector file you need already.

Another tip; download a piece of artwork at the vectorlib, open that in illustrator and experiment with the shapes and layers that are already there.
that way you will get a hang of how it works  ;)