Dragon's Lair Fans - Arcade Lifestyle
General Chat => Technical Area => Topic started by: bat968 on October 13, 2013, 07:30:56 PM
-
Hi All
Hope you can help... Here is the story.
I received the machine with no sound issue but with a video problem that is now fixed.
Now I have a 'big' problem. I can't play, add credit, hear any demo sound...
There is a Credit/TestButton/Volume metal plate near the cash box door, nothing is working.
Even if I add credit manually to the coin entries, nothing.
Do you have ideas?... :'(
I just received the machine, PCB was not attached so some connectors were disconnected.
Is it possible that during my tests, if I had placed a small connector on the bad place, it could have damaged the credit/test/volume functions?
I say that because when I had the video problem, the sound was working...
Thank you for your help
Baptiste
-
tcheck there maybe somithing interresting about DOT sound boad
Upright Discs of Tron Squawk and Talk
http://forums.arcade-museum.com/showthread.php?t=167126
-
video youtube about DOT testing mode 5 times bottom push to test sound is correct let s go tcheck
http://www.youtube.com/watch?v=HihYvTZZZo0
-
Yeah this is the environmental kit to have the voices on the upright.
Interesting, maybe I will buy it later, but can't solve my existing problem for now. ;)
Thanks :)
-
Any idea? Someone? :P
-
Any idea? Someone? :P
I don't know this game ..... But your discription is to limited. A connector in the wrong socket can do a lot of damage if there was a more then 5 volt wire in that connector.
-
I have found the problem (I hope) : a ribbon cable to change.
I am trying to find a SCSI ribbon cable to replace it, like the 4 others that were already changed.
Thx
-
Good luck :)
-
Cable is ok but no change...
+ even with the original configuration (old cable) I have an inverted image up-down... :evil:
I will check the problem later... :ghost: :ghost: