Dragon's Lair Fans - Arcade Lifestyle
General Chat => Arcade Lifestyle => Topic started by: DarthNuno on August 19, 2007, 08:36:51 PM
-
This time, it gonna be very easy 8) ...
I'm preparing my 'weapon' :lol: :
(https://www.dragonslairfans.com/after/ab1.jpg)
... very similar to this one isn't it :?: :arrow:
(https://www.dragonslairfans.com/after/topgun.jpg)
:lol: :lol: :lol:
...ok, so like it said... it will be a very easy roadtrip this time ... coz the seller is really close to my house, check it out :
(https://www.dragonslairfans.com/after/ab2.jpg)
... 12 km to go, thank my lord 8)
The usual pictures... for history :lol:
(https://www.dragonslairfans.com/after/ab3.jpg)
Do you notice... 36° Celsius... a world record in Belgium !!! :lol:
(https://www.dragonslairfans.com/after/ab4.jpg)
... as fast as the F14 Tomcat... sorry for the picture 'fast motion' :lol:
(https://www.dragonslairfans.com/after/ab5.jpg)
... and 20 minutes later, we are 'on location' :
(https://www.dragonslairfans.com/after/ab6.jpg)
SO, I"m here for an After Burner upright dedicated cab :P
Let's check the F14 simulator, made by Sega in 1987 :arrow:
(https://www.dragonslairfans.com/after/ab7.jpg)
The game in working, the force feed back is ok, but the two red lights on top and the 'lock' light don't work. The side art on the right is complete.
The right side art is damaged as you can see on the following picture :
(https://www.dragonslairfans.com/after/ab8.jpg)
... but it's ok for me. Deal ! I've to save that cabinet !!!
(https://www.dragonslairfans.com/after/ab9.jpg)
By the way, I didn"t check If that After Burner cab can be loaded into my car... boah... that cab seems to have a common size...
(https://www.dragonslairfans.com/after/ab10.jpg)
...a quick picture, for my sponsor :lol: :arrow:
(https://www.dragonslairfans.com/after/ab11.jpg)
Let's load it :
(https://www.dragonslairfans.com/after/ab12.jpg)
...ops... it's bigger then expected ... :?
(https://www.dragonslairfans.com/after/ab13.jpg)
Holy Jesus :shock: 'cannot close ... :?
(https://www.dragonslairfans.com/after/ab14.jpg)
What if I push the seat to the max ? :shock:
(https://www.dragonslairfans.com/after/ab16.jpg)
...it's ok now but ...
(https://www.dragonslairfans.com/after/ab15.jpg)
(https://www.dragonslairfans.com/after/ab17.jpg)
...impossible to drive like that of course !!! :arrow:
(https://www.dragonslairfans.com/after/ab18.jpg)
Fortunately my wife is much 'thiner' then I, so she'll drive :wink:
(https://www.dragonslairfans.com/after/ab19.jpg)
... and 25 minutes later, we are *safe at home, with a new toy in the kitchen :
(https://www.dragonslairfans.com/after/ab20.jpg)
Next step : clean that baby, and fix the lights 8)
Stay TuNed :wink:
-
Very nice! :D
You must have a very patient wife! :lol:
-
What was the Namco game and pinball in the background?
-
The pinball game on the left is World Cup Soccer. The one on the right looks like Revenge From Mars..?
http://www.ipdb.org/machine.cgi?id=2811
http://www.ipdb.org/machine.cgi?id=4446
-
Very nice! :D
You must have a very patient wife! :lol:
:wink: Yes she is... fortunately :P
What was the Namco game and pinball in the background?
Have a look right here :arrow: :arrow: :arrow:
https://www.dragonslairfans.com/phpBB2/viewtopic.php?t=265
The other pinball on the picture is a Bally 'Revenge from Mars' 8)
-
DarthNuno: I beat you to it by some seconds! :wink:
I've been following your progress since you started building your Nuno lair (gameroom). Now that you are starting to drag more machines into your kitchen, living room and so on..
Are you planning to build a bigger gameroom? :D
-
DarthNuno: I beat you to it by some seconds! :wink:
I've been following your progress since you started building your Nuno lair (gameroom). Now that you are starting to drag more machines into your kitchen, living room and so on..
Are you planning to build a bigger gameroom? :D
:wink:
You're right... I have a lot of new games, and of course the Nuno's Lair is full 8)
...the extend of the Lair is on the way... stay tuned :roll: :wink:
-
:D
after burner a great game !!!!!!!!!!!!!!!!!!! yheaaaaaaaaaaaaaaaa
i have the same cab, so you should have 3 lights behind that bezel...
2 lights for the red , and one for the lock on 8)
if they dont work when you change them (can happen) it will be probably one of the litlle pcb inside the cab ...
http://dweeb.net/afterburner/ssrfix
:wink:
-
Thanks for the link Fred :o
I got this cab' five weeks ago, and I still didn't clean it yet :oops: what a shame isn"t it ? :oops:
One side art is badly damaged... and I didn't find any website where I can order a repro :?
-
Congrats on your great find of Afterburner!!
You're getting to make alot of cool roadtrips!!! :D :D :D
8) Envious here!!! 8) Great Work!!!
-
Great cab :D
I've buy the same ther's two month. no side on left and the right is not in good condition :roll:
If you find it or build a copy, contact me ;)
I hope buy the deluxe version in near futur :P
-
you keep buying these big cabs, surely the cost of land/ real estate where you are cant be that cheap?! :? :? cool cab, never really played it that much when it came out as none of my local arcades had it... too expensive perhaps?
-
cool cab, never really played it
you had a chance playing it wehn you came to Miami few months ago...but you choose a city tour :(
:lol:
-
Now inside the game room (v1) :arrow:
The game is working fine, but I have to replace some lamps.
(https://www.dragonslairfans.com/after/gameroom/ab2.jpg)
(https://www.dragonslairfans.com/after/gameroom/ab3.jpg)
:-*
-
Afterburner II is without a doubt my all-time favourite arcade game so I have 2 words for you Bruno - I Hate You (and I can count lol)
-
...and I can count lol...
Like ANY says :
here is 10 kind of people:
-who can read binary
-all the rest
;D :-* :-* :-*
-
Any luck locating side art for this? I have a chance to pick up an After Burner II, but it has no side art at all. If I can't find artwork, I'll hold off for a better cab.
-
I can read binary....just dont say hexadecimal to me though!!
-
Any luck locating side art for this? I have a chance to pick up an After Burner II, but it has no side art at all. If I can't find artwork, I'll hold off for a better cab.
I've got last year ... only 1 side :oops: The left one :arrow:
(https://www.dragonslairfans.com/after/after_burner_side_art_left.jpg)
I'll scan it soon, and give it to the masters of vectors ;)
I hope I'll able to found the other one too :?
-
Any luck locating side art for this? I have a chance to pick up an After Burner II, but it has no side art at all. If I can't find artwork, I'll hold off for a better cab.
I've got last year ... only 1 side :oops: The left one :arrow:
(https://www.dragonslairfans.com/after/after_burner_side_art_left.jpg)
I'll scan it soon, and give it to the masters of vectors ;)
I hope I'll able to found the other one too :?
When you going to scan it ? I'd be interested in creating the file ASAP (I know of other AB cabs without any sideart)
-
Someone on CoinOpSpace has access to a NOS set of both sides and is going to scan them. Hopefully this will happen.
-
Someone on CoinOpSpace has access to a NOS set of both sides and is going to scan them. Hopefully this will happen.
Woow, that's a fantastic news, thanks Spyridon :-*
I've seen side arts damaged on *almost* all After Burner cockpits :-[ ... this repro will be very useful to a lot of us :)
-
Woow, that's a fantastic news, thanks Spyridon :-*
I've seen side arts damaged on *almost* all After Burner cockpits :-[ ... this repro will be very useful to a lot of us :)
I agree it is one of the most difficult sides to find
Mav
Count me on for 1 pair
-
Well get me a scan of at least one side and I'll start on that project too ;D
-
Well get me a scan of at least one side and I'll start on that project too ;D
Wow dex,
You're great!
Mav
-
Someone on CoinOpSpace has access to a NOS set of both sides and is going to scan them. Hopefully this will happen.
Looking back at the posts, I think the guy over on CoinOpSpace that was talking about scaning the artwork is the same Dexter from this site.
Dex is that correct?
P.S. I'm picking up my AB II this week, so I'd love to see this artwrok scanned.
-
Bump. Anyone working on the side art for this?
-
Bump. Anyone working on the side art for this?
Not yet :-\ ... I'll drop a mail to CoinOpSpace. I'm sure a lot of collectors are looking for these side arts, because I see 'side art' problems on almost all After Burner upright cabinet pictures on the web...